Top Cooling Fan Kit

KOOBOOK 1Set 12V Thermoelectric Peltier Cooler Refrigeration Cooling Fan System Heatsink DIY Kit

  • Silent designing, large air volume.Superior thermal performance.Special bottom design improves the efficiency of heat transfer.Complete sealed....
  • This cooling fan is suitable for cooling in a small space. The main unit of the air-cooling equipment is water for heat dissipation.Great DIY kit for....
  • What you do get, is a sturdy heat sink, a small 12Vdc fan, a water heat exchange block, a bottom clamp bar, and some basic hardware(Peltier module not....
  • Water block connections fit 3/8" tubing just fine. The "base board" is a stronger bar 5mm x 12mm bar. Fan is 12Vdc 0.09A, heat sink fits the 40mm X....
  • Note:There is nothing in the kit that is "thermoelectric" and nothing that "refrigerates".You assemble it yourself,with your own heat sink compound.It....
Check Stock

Geekworm DC 5V 4007 40MM 4CM 40x40x7MM Cooling Fan for NVIDIA Jetson Nano Developer Kit and Jetson Nano Metal Case/T100 Case/T300 Case

  • Note: This cooling fan does not support PWM and speed feedback.
  • The NVIDIA Jetson Nano Developer Kit is not included in the packing list..
  • This 5V cooling fan supports to install in Geekworm NVIDIA Jetson Nano Metal Case (ASIN: B07RRRX121).
  • T300 Metal Case(ASIN: B07W7CNSR8), T100 Metal Case(ASIN: B07VYKRJQY).
  • This is an ultra-quiet cooling fan for NVIDIA Jetson Nano Developer Kit.
  • it with a 2.54 DuPont connector which is easy to insert. About how the install the fan, please refer to the photo..
Check Stock

GE AHE08AX 8,000 BTU 350 Sq. ft. Window Air Conditioner with Heat (Renewed)

  • Cooling and Heating Capacity - delivers 8,000 BTU cooling/3,800 BTU Heating for small rooms up to 350 square feet.
  • Year-Round Versatility – select from three cooling, three heating, and three fan speeds for flexible and optimal home comfort year round.
  • Energy Saver Mode - when the room is cool enough, Energy Saver Mode automatically turns off the fan and compressor, saving you money on utilities.
  • EZ Mount Window Installation Kit - this AC has a fixed chassis and installs easily with included EZ Mount installation kit.
  • Electronic Thermostat with Remote - digital controls with included remote make it easy to adjust and manage your settings from anywhere in your room.
  • Energy Saver mode - the fan and compressor run only when cooling is needed and shuts off when the room is cool enough.
  • Easy to Clean Filter - slide-out filter is easy to remove and clean, keeping your unit running its best when cleaned every 30 days.
  • Voltage – this unit requires a 115 Volt outlet type.
  • Additional Features - 24-hour on/off timer and 4-way adjustable airflow offer ease of use.
Check Stock

Outdoor Fan Misting System Kit 26.3FT with 8 Nozzles, Mister Fan for Outside Patio, Cool Misting Fans, Water Misting Fan for Cooling Outdoor, Backyard Misters for Fan, Water Mister for Cooling Patio

  • ... Misting Ring is made of 8 exclusive removable brass nozzles which are made from brass material, no blocking, no rusting which ensure perfect misting effect. Excellent misting effect( Mist range: 20-40inch/nozzle) The well-made Tee connector is good sealing, no leaking and easy to insert the tubing..
  • Fan Misters for Cooling Outdoor - The fantastic outdoor cooling system provides a natural water cooling area,release you from the indoor bad air conditions and enjoy the fantastic outdoor sight in hot summer, cools the surrounding air temperatures up to 20℃ or 68℉. It is very suitable for outdoor activities and gatherings on the courtyard and terrace, bus station, indoor basement, etc..
  • US Standard G3/4" Solid Brass Adapter - The 3/4" tube adapter is made from solid brass which is of superior durability than plastic adapters, no rust, no break and no leakage, widely match with garden connectors like faucet, hose splitter, garden filter,garden timer etc..
  • Money Saving & Energy Saving - Misting fan cooling system only use tap water to spray and cool down the temperature around you without electricity and energy consumption. Our fan misting kit can be your great idea to save money and it’s environmental friendly product..
Check Stock

Fan Misting Kit, Outdoor Fan Misting Cooling System with 19.36FT (5.9M) Misting Line + 5 Brass Mist Nozzles + Brass Adapter(3/4\) for Cooling Patio Garden Greenhouse Breeze, Connect to Any Outdoor Fan

  • 【Outdoor Fan Mister for Cooling】In the hot summer, most fans tend to blow hot air, which is very painful. Now just install our fan misting kit on the front grill of the existing fan to turns any fan into an air-cooled atomizing fan.
  • Then you can enjoy refreshingly cool air on hot days.
  • 【Pre-assembled and Easy to Use】This fan misting system kit is completely pre-assembled, and just connect it to faucet in less than 10 minutes, then Delivers very fine mist to significantly cool the air in the hottest summer weather..
  • 【Strong and Durable Material】This fan misting cooling system kit is sturdy, durable and well made. Each component in the system adopts exquisite craftsmanship and the top materials. PE pipes with high corrosion resistance and fittings that are not easy to rust have a longer use time and a better spray effect..
  • 【Detachable Brass Nozzle】The mist nozzle of fan mist kit is made from brass material, easy to install and pull out, no blocking, no rusting and can be applied for a long time, excellent misting effect.
  • The well-made Tee connector is good sealing ,no leaking and easy to insert the tubing..
Check Stock

KEN BROWN 12 Inch Shutter Exhaust Fan Wall Mounted,Aluminum with 1.65 Meters Power Cord Kit,High Speed 1800CFM,Vent fan for Commercial,Greenhouse,Attic,Shed,Shop

  • MULTIPURPOSE:KEN BROWN 12 Inch Shutter Exhaust Fan is perfect for removing heat, moisture, dust and unpleasant odors from any residential,commercial, industrial or agricultural space.Ideal for use in home attic, workshops, welding rooms, factories, warehouses, barns, and greenhouses..
  • CORROSION RESISTANT:This 12 inch exhaust fan is made with high-grade aluminum shutters and blades which can withstand moisture and high temperature and provide longevity to the fan and prevent corrosive rust from forming..
  • AUTOMATIC ALUMINUM SHUTTERS:This wall mounted exhaust fan includes automatic gravity shutters that open and close with the operation of the fan..
  • Power Cord Kit Included: This Power Cord Kit is easy to install & includes a 3-foot strain relief clamp wire connectors & installation instructions. Simplify installation of your Ventilation Fan with this easy to use Universal extension cord power kit..
  • SUPERIOR AIRFLOW TRANSFER:You will enjoy the power and efficiency of KEN BROWN 12 inch shutter exhaust fan which runs 120 volts ,60Hz with 1650 rotations per minute,10.5M/S,cooling and ventilating an area of 1800 cubic feet per minute!This industrial grade shutter fan can solve all of your cooling and ventilation needs..
Check Stock

Metal Case with DC Brushless 5V PWM Fan for NVIDIA Jetson Nano Developer Kit,Cooling Fan and Metal Enclosure with Camera Holder Reset and Power Buttons Compatible with IMX219 Camera,Wireless-AC8265

  • The package includes Metal Case and 5V Dedicated PWM Adjustment Cooling Fan, for Jetson Nano Developer Kit. (NOTE: Jetson Nano Developer Kit is NOT included)..
  • The Metal Case with Clever design:easy access to the peripheral connectors.
  • with camera holder,dedicated place to mount your camera.
  • RESET and POWER buttons,It is easy to operate..
  • The Metal Case is Compatible with peripherals,eg:Camera: IMX219- 77 / 77IR / 120 / 160 / 160IR / 200 Camera, RPi Camera V2 / RPi NoIR Camera V2.
  • The metal case Structure Introduction:Camera holder, dedicated place to mount your camera.
  • Easy access to the extension header, with clear label.
  • Opening for onboard connectors and cooling fan.
  • The Fan supports 5V voltage.PWM Speed Adjustment, Strong Cooling Air.The Cooling Fan with 4PIN reverse-proof connector.Dimensions: 40mm×40mm×20mm.
Check Stock

Portable Air Conditioner-Heat/Cool, 14000 BTU SACC 500 sq.ft Standing Room AC Unit with LED Display Remote Control and 24-Hour ON/OFF Programmable Timer Low Noise Level ETL Certified

  • COOLING- 14,000 BTU Cooling Capacity (R410A refrigerant) cover up to 500 sq.ft. Great for using in bedroom, home living room, office, apartment, or....
  • MULTI-FUNCTION – Cooling / dehumidifier / fan three function in one unit . With 2 fan speed optional . Tem. Setting is only available in Cooling....
  • DISPLAY & TIMER - LED DISPLAY and simple select control panel features mode selection button, up/down temperature adjustments, fan speed selection and....
  • SELF-EVAPORATION - Automatic self-evaporation technology - no bucket to empty (except in some high humidity area) - Built-in dehumidifier removes up....
  • WINDOW KIT - Venting it by a simple three step process with WINDOW KIT (Included). Simply connect the vent hose to the back of the unit, remove the....
Check Stock

KEYSTONE M Series Rooms up to 150-Sq. Ft. Portable Air Conditioner

  • {TURBO-BOOSTED PORTABLE COOLING} – This Keystone 10, 000 BTU (ASHRAE) / 6, 000 BTU (DOE) portable air conditioner includes a special Turbo mode that jump-starts the cooling process by running the fan on max speed at the lowest possible temperature setting for 10 minutes..
  • {ASSEMBLED HOSE CONNECTIONS} – The main struggle of portable air conditioner users is hose assembly. Keystone has designed a hose kit that comes with the connectors already attached and ready to use right out of the box. Click one end into the back of the AC and the other into the included window kit, hit the power button, and enjoy the cool!.
  • {TEMPERATURE SENSING “FOLLOW ME” REMOTE CONTROL} - With a thermostat built into the remote control, say good-bye to uneven room temperatures. Press the iFEEL button to activate the thermostat, which signals the AC to cool the space based on where you are..
  • {THOUGHTFUL TECHNOLOGY} – Our auto-swing top air flow louvers move air around the room while cooling, making all parts of your room more comfortable. Sleep mode gradually increases room temperature, saving you energy and money while you sleep. The iCLEAN function removes dust build-up from the internal evaporator, keeping your unit healthy and clean..
Check Stock

ACforCars Universal A/C Kit System (Without Compressor) Condenser 10x18, Cooling Fan 10', Underdash Evaporator Console Black, Drier, Fitting, Hose Bundle & O-Rings

  • UNDER DASH EVAPORATOR UNIT 13,000 BTU 4 Louver all BLACK Console, 24 Pass, Double Shaft Blower Motor 12V, Include Mounting brackets, drain hose and T, 15.7inL x 11.8inW x 5.7inH.
  • CONDENSER 10in X 18in 18mm depth COOLING FAN 10in 80W 12V RECEIVER DRIER Steel Black.
  • CLAMP for Drier SWITCH ORING Kit (5) #06 5/16 (5) #08 13/32 (5) #10 1/2.
  • HOSE Kit (6 FT) #6 5/16 (4 FT) #8 13/32 (5 FT) #10 1/2.
  • FITTING Kit #6 #8 #10 (Straight) (45 degrees) (90 degrees) (90 degrees w Service Port) & Hose Clamp.
  • Included components: UNDER DASH EVAPORATOR UNIT, CONDENSER, COOLING FAN, RECEIBER DRIER, CLAMP, PRESSURE SWITCH, O-RING Kit, HOSE Kit, FITTING Kit.
Check Stock

VICKERT Outdoor Mist Cooling System Fan Kit for a Cool Patio Breeze 20FT (6M) Misting Line + 5 Copper Metal Mist Nozzles + a Copper Metal Connector(3/4'') Fit to Any Outdoor Fan (Black Color)

  • PERFECT MISTING COOLING: : Turn any fan in to air chilling misting fan with use of our Fan Mist Kit! During hot summer months, most fans tend to blow hot air which adds to the misery. Simply attach our fan mist ring on the front grill of your existing fan cools the surrounding air temperatures up to 20 degrees.Perfect if you are hanging out by the pool, on the patio, or anywhere around your home..
  • High Adaptability: US standard threaded joints + universal joints, adapt to various taps and the tight interface effectively prevent water leakage..
  • HOW IT WORKS: Simply tie misting system to your fan with the Cable ties provided. Spin the high quality Copper Metal Mist Nozzles on to Misty Mist ring and then attach your garden hose to our hose connector! The range is wide. Just determine how much power and range you need, for “spot cooling” to suit your purposes. Water is circulated from your hose, and a fan pushes the mist through, producing a cool breeze!.
  • Easy to install : Completely assembled misting fan kit(the fan misting system has been pre-assembled, just need to connect the fan and water pipe), Installs in less than 10 minutes, delivers very fine mist to significantly cool the air in the hottest summer weather..
Check Stock

ECCPP Radiator Cooling Fan Kit Assembly Replacement fit for 2007-2009 Kia Sorento 3.3L 3.8L

  • FITMENT – This radiator cooling fan kit fits 2007-2009 Kia Sorento 3.3L 3.8L.
  • RADIATOR FUCTION – Innovative engineering,manufacturing technology and quality control ensure that ECCPP radiators meet or exceed the performance of the original equipment radiators they replace.
  • that extends to all components,including engine and transmission oil coolers.
  • COOLING FAN FUCTION – Engine cooling requires a constant supply of fresh air,The radiator cooling fan draws air past the fins of the radiator core to lower the coolant temperature that will circulate through the engine,and our cooling fans are powered electronically,It receives a signal from a coolant temperature sensor when the engine is running too hot, and it turns the cooling fan assembly on.
  • HIGH QUALITY – ECCPP’s assemblies are designed to be a direct replacement for the original equipment manufacturer’s part. That means installation is easier, and the part fits as intended.Our assemblies are also tested to OEM specifications, so you know the part you’re putting on performs as good or better than the part you’re taking off.
  • ATTENTION – Don’t forget to search for See all vehicles before purchasing the items and you can also look though the i....
Check Stock