Top Copper Axle

56 Pieces Skateboard Truck Hardware Kit Includes 8 Pieces Spacers, 8 Pieces Axle Nuts and 40 Pieces Speed Rings for Skateboard and Longboard

  • Package quantity: package comes with 8 pieces skateboard spacers, 8 pieces axle nuts and 40 pieces speed rings, enough quantity to fit on a skateboard or longboard and improve bearing performance.
  • Speed spacer: our skateboard spacer allows you to rotate the axle nut downward all the time, thus reducing slop and increasing bearing life, durability and performance.
  • The +/ -0.02 mm precision tolerance ensures nicely fit and very fast bearing at a time.
  • Speed rings: our speed rings can increase speed and extend longer bearing life by reducing friction among the bearing, axle nut and hangar.
  • Axle nuts: our axle nuts will prevent your wheels from falling off, the more you change your wheels and bearings, the more the axle nuts wear out and lose its tightness.
  • These standard size axle nuts will keep you locked up and will fit most skateboard/ longboard trucks with 8 mm axles (in fact, each truck has a standard 8mm axle size).
  • These axle nuts have thread dimensions of 5/16 inch.
  • Wide application: this skateboard tool kit can be applied for most skateboard/ longboard trucks, they are strong and with proper installation, are resistant to stripping.
Check Stock

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit CV Axle Removal Tool Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

  • ⚒️ Quick to Remove CV Axle ⚒️ - With this CV axle removal tool the axle assembly is popped out of trans axle, and install the new axle,not need spend a lot of effort. Without damage to transmission case or inside roller bearing..
  • ⚒️ Perfect Joint Fork ⚒️ - This slide hammer puller set includes opening 63mm and 48mm CV joint fork disassembly adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use..
  • ⚒️ Heavy Duty ⚒️ -This slide hammer weighs 10.5 pounds and is 19.5 inches long, which is larger than the normal ones. So it has enough length to slide to generate more force, easier to use and work better.The hammer and VC joint fork are made of heavy-duty steel, durable and not easy to break..
  • ⚒️ Easy to Use ⚒️ - You need to attach the inner CV axle puller to your axle slide hammer, then place the adapter around the axle after the inner start. Slide the 10 lb. hammer weight back and forth to create torque and pull out the axle. Note: you can use....
Check Stock

Donner DST-100L Electric Guitar with Donner DS-1 Guitar Stand

  • ...e not just perfect for a Texas blues/rock sound, but for other musical styles too..
  • [Canadian maple neck with “C”shaped profile] Donner DST-100 beginner electric guitar bundle uses perilla wood fingerboard, solid basswood body, Canadian maple neck with “C” shaped profile, classic design, comfortable fit..
  • [22 copper-nickel frets] The 39-inch electric guitar features a pick up selector switch, a volume knob, and two different tone knobs. 22 copper-nickel frets with fret position marks on the neck and top of the fingerboard, and also is smooth and friendly to your hands..
  • 【Strong A-Frame Guitar Stand】- All aluminium alloy frame, minimalist design highlights the high-end fashion taste.The rotating axle adopts magnetic damping design to enhance the feel of rotating and also to further ensure high stability of guitar stand..
  • 【Lightweight but Protective】- Patented design of guide channel and lock fastening structure to fix vertical tube and bottom tube not only have achieved detachability and portability, but also ensured the mechanical rigidity of the foldable stand..
Check Stock

Bent Pine Derby Axle - 1.5 Degree Bend with Easy Turn Screw Driver Slot for Derby Cars - Polished Pre Bent for a Steering Axle 1 axle

  • 1.5 degree bent and polished official steering axle (1 axle), for use in steering a pinewood derby car.
  • Convenient EASY TURN screw driver slot so you can easily turn the axle without damaging it..
  • Official polished axles with burrs removed and underside of axle head angled minimizes wheel contact friction.
  • A single, polished axle from the Official scout derby kit.
  • Pre-bent axle with Easy Turn screw driver slot saves cost of an axle bender tool.
Check Stock

Chorme Spun Blade Spinning Front Axle Nut Cover Cap Nut Cover for Harley

  • Aftermarket replacement parts conceal your front axle hardware for an exclusive skull look.
  • Easy to install, Give the front axle a nice touch that said an improvement over the stock axle exposed.
  • Kindly Remind: Please check the measurement before order, You may have to modify both sides to fit your axle, a spacer might required for smaller axle nut.
  • Tips: Use loctite on screws to secure the caps in place.
  • Package Includes: 2x front axle nut caps, 2x set screws, 1x Allen key.
Check Stock

12 Pcs Bike Wheel Axle Nut and Safety Washer Kit 3 Sizes Bicycle Hub Flanged Hardware Nuts Steel Flange Nuts Wheel Retaining Bicycle Hook Hub Parts for Front and Rear Bike Wheel Mountain Road

  • Reliable and Sturdy: these wheel axle nuts are made of steel, hard to deform, bend or break, not easy to rust, smooth and bright on surface, with clear and neat thread, without burrs or pointed edges, delicate and serviceable, with a long service life.
  • What's Included: the package contains 2 pieces of M 9.5 bike nuts, 2 pieces of M 8 bike nuts, 2 pieces of M 10 bike nuts, 4 pieces of bike axle washers about 10 mm/ 0.39 inch, 2 pieces of bike axle washers approx. 8.5 mm/ 0.33 inch, various in sizes and sufficient in quantity, enough to meet your replacement needs of bicycle parts.
  • Size Information: this M 8 flange nut is about 0.6 inch in overall width, 0.31 inch in inner diameter, 0.24 inch high, matching with safety washer approx. 0.33 inch, suitable for bicycle front axle.
  • The M 9.5 nut is about 0.71 inch wide, 0.4 inch in inner diameter, 0.6 inch high, with safety washer about 0.39 inch, nice for bike rear axle, and the M 10 nut is about 0.71 inch in overall width, 0.4 inch in inner diameter, 0.28 inch high, with safety washer about 0.39 inch, nice for middle axle.
  • Choosing Desirable Size: please measure the size of the bike axle and choose the right bicycle wheel nut, you can mark the axle with paper and measure the circumference of the circle, you ....
Check Stock

MOTLTECH 11\ 280mm Motorcycle Shock Absorber Rear Suspension Adjustable Air Shock Absorber Universal Compatible For Honda Suzuki Yamaha Kawasaki ATV Go Kart Quad Dirt Sport Bikes, 1 pair

  • 【 Fits】2013-2018 Polaris Ranger XP 900 | 2014-2018 Polaris Ranger XP 900 Crew | Replaces OEM Part #: Rear : 1332947, 1333756, 1334175 | NOTE: Not compatible with Anti-Lock Brake Systems (ABS) NOTE: These axles do not fit the 2016 Ranger 900 High Lifter Edition or Ranger 900 Diesel.
  • 【ADR Performance】 Each SuperATV Polaris Ranger Axle is fully assembled using precision components, high quality grease, and heavy-duty steel boots. You can expect similar durability and performance in the ADR Brand Ranger 900 XP Axle as our Rhino Brand..
  • 【Cost Effective Axle】 Looking for a cost effective, quick replacement Polaris Ranger 900 XP Rear Axle? This rear axle is designed to replace any stock UTV axle. Rest assured this ADR Brand Polaris Ranger 900 XP replacement Axle will meet and exceed your OEM axle!.
  • 【Installation】Scan included QR code or visit manufacturer's website to complete installation instructions for your Polaris Axle..
  • 【Expertly Made】 At SuperATV, we des....
Check Stock

MOSNAI Golf Cart Driver Side Rear Axle Shaft for EZGO TXT/Medalist 1994-2013 Electric Golf Cart, Replaces OEM 20377G11

  • ✅【Fit Models】Golf Cart Rear Splined Axle Shaft Fits EZGO TXT & Medalist 1994-2013 electric golf cart. (NOTE: Will NOT FIT RXV MODELS, NOT FIT GAS MODELS).
  • ✅【Replace OEM Part】The EZGO driver side axle replaces OEM part# 20377G11 20377-G11..
  • ✅【Product Size】Our EZGO TXT rear axle shaft meets OEM quality standards, the length is about 23 7/8" and has 24 teeth on both ends..
  • ✅【Replace Your EZGO Rear Shaft】When the axle is excessively noisy, Or possibly when the vehicle has difficulty moving in one direction or the other, this problem could be caused by a worn axle spline..
  • ✅【Package Include】 1 * EZGO driver side axle with rear axle nut..
Check Stock

Alltrade 648471 1/2' Dr x 34mm Axle Nut Socket

  • For easy removal of front wheel drive Axle shaft nuts.
  • Impact grade 6-point socket. Extra deep to fit various axle lengths.
  • For easy removal of front wheel drive axle shaft nuts.
Check Stock

Powerbuilt 647079 35mm Axle Nut Socket , Black

  • For easy removal of front wheel drive Axle shaft nuts.
  • Impact grade 6-point socket. Extra deep to fit various axle lengths..
  • For easy removal of front wheel drive axle shaft nuts.
  • Impact grade 6-point socket made from chrome molybdenum steel.
Check Stock

Jutom Wheelbarrow Axle Bracket Set 10 x 0.63 Inch Heavy Duty Wheelbarrow Shaft 4 Pcs 2.1 x 3.3 Inch Brackets 8 Pcs Bolts and Nuts Compatible with 5/8 Inch Wheelbarrow Axles

  • Satisfy Your Use Needs: you will receive 1 set of wheelbarrow axle kit, including 1 piece of axle, 4 pieces of axle brackets, 8 pieces of bolts and nuts, enough quantity and nice combination to meet your choice and use needs.
  • Dimension Information: the size of the wheelbarrow axle is approx. 10 x 0.63 inches, and the size of the wheelbarrow bracket is approx. 2.1 x 3.3 inches, the appropriate size to work well with 5/8 inch wheelbarrow axles, please confirm the size before purchasing.
  • Good Helper: the axle brackets are indented on one side, which prevents the axle from sliding through the bracket.
  • These wheelbarrow parts brackets will ensure that you always have a spare axle bracket on hand to help you use your wheelbarrow axle better.
  • Stable Performance: our wheelbarrow axle bracket is coated in black on the outside, which not only looks beautiful and simple, but also resists corrosion and rust to a certain extent.
  • They can effectively improve the performance of the wheelbarrow.
  • Rustproof and Reliable Material: our wheelbarrows replacement parts are made of quality metal material, long lasting, reliable, sturdy and wear resistant, will not easy to rust or break, you can use for a long time.
Check Stock

ABN Front Wheel Drive Axle Pulley Attachment - CV Axle Removal Tool CV Joint Slide Hammer Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your constant velocity (CV) axle joints, use the ABN Front Wheel Drive Axle Puller Attachment.
  • Inner CV axle puller designed to pull joints with hidden retaining rings from FWD vehicles.
  • [Works with Your Slide Hammer] The CV joint puller attaches to your slide hammer and allows you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • Fits slide hammers with 5/8-inch x 18 threads.
  • [Easy to Use] Attach the inner CV removal tool to your slide hammer then slide the adapter around the shaft behind the inner boot.
  • Use the slide hammer to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Unlike pry bars or CV axle fork tools, the CV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Heat-treated CV puller adapter with black oxide finish ensures optimal strength and durability while r....
Check Stock