Top Copper Based Alloys

3mirrors ALUMINUM Tungsten Electrode Sharpener Grinder Head TIG Welding Tool with Cut-Off Slot Multi-Angle & Offsets, 5X 25mm Double Diamond Wheels, 1X Connecting Rod

  • Premium 10PK purple rare earth blend (EWG) tig welding tungsten electrodes , 5pk 1/16" & 5pk 3/32" purple tungsten electrodes for tig welding.
  • The purple tungsten tig electrode is with great welding performance: non radioactive, reliable arc-striking, low burn-off rate and good stability with low burn-off rate..
  • The rare earth blend tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length rare earth blend (EWG) tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

21 Sticks BLUEFIRE BCuP-2 Half 1/2 lb Self Fluxing Phosphor Copper Brazing Alloy Welding Rods No Need for Flux 0.050 x 1/8 x 14 Industry Professional Grade Propane Gas Soldering Torch Supply

  • Self Fluxing: USA USA AWS A58 Class: BCuP-2 brazing alloys rods. Contents: Phosphor (P): 6.6-7.4%.
  • Copper (Cu): Rest. This brazing alloy is close to eutectic crystal composition. It is self fluxing and do not need any brazing flux when soldering copper to copper or copper to brass joints, while for brazing brass to brass parts, Bluefire JFB-102 brazing flux is recommended for best results..
  • Valued Pack: Each tube contains 21 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight. GREAT SAVING!.
  • Best Performances: Solidus Temperature: 1310°F / 710°C, Liquidus Temperature: 1508°F / 820°C. Recommended joint clearance: 0.002"/0.007", Fluid Rating: 5. JCuPB brazing rods contain lesser phosphors, resulting a much better plastic performances and a little higher melting points..
  • Versatile: A popular and economic solution for HVAC, Plumbing and Mechanical repairing. Ideal for gas welding, MIG and TIG welding, contact welding, HF brazing and some furnace welding. Perfect for brazing Copper to Copper, or Brass and Bronze joints in A/C, freezer, evaporator, heat exchange, water heater and etc. Cannot be used to weld iron or steel parts..
  • High Quality: All Bluefire brazing alloys are manufactured under highest quality control. Equivalent to HARRIS 0 PN0....
Check Stock

2.2lbs Delft Clay Casting Gold Silver Copper-Based alloys, Pewter

  • ✅ The Delft Clay Method is a highly refined form of sand casting that substitutes genuine Delft Clay from Holland for ordinary casting sand. The process was invented by Hans Karreman, a Dutch goldsmith. Delft Clay is much finer than casting sand, providing remarkably sharp and highly detailed castings in gold, silver, copper-based alloys, pewter, etc..
  • ✅ Castings require very little finishing work. Once you have cast your piece, the Delft Clay can be re-used. Since this is a cold-molding process, molds can be made from patterns composed of wood, wax, epoxy, plastics, and, of course, metal. Because this is a type of sand casting, it is best suited to producing castings without pronounced undercuts..
Check Stock

TRIM Cutting & Grinding Fluids E206N/1 Long Life Emulsion, 1 gal Jug

  • Dramatically extends useful life without the need for tank-side biocides or fungicides.
  • Low foaming for todays demanding high-pressure, high-volume applications.
  • Compatible with a very wide range of material including steels, copper, and aluminum alloys, and many plastics and composites.
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys.
  • Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives.
Check Stock

RBCuZn-C - LFB Bare Bronze Brazing Rod - 36 x 1/8 1 Lb

  • LFB (bare low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as carbon steel, copper alloys, cast iron, malleable iron, stainless steel and some nickel alloys. Mechanical and physical characteristics include ductility, machineability, high strength, free flowing with good tinning action and a low melting point (1630°F).
  • A “must have” filler metal for every machine shop, LFB is excellent for building up wearing surfaces or large areas where successive layers must be added.
  • galvanized parts can be brazed without damaging the zinc coating. Precise balance of copper and zinc along with alloying elements of tin, iron, manganese and silicon produces weld deposits that can be easily machined but work harden once put into service.
  • READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***.
  • Available in different sizes: 0.045", 1/6", 3/32", 1/8", 5/32", 3/16" and 1/4".
  • Available in different package weights: 1 Lb, 2 Lb, 5 Lb and 10 Lb.
Check Stock

Delft Clay Casting for Gold, Silver, Copper-Based alloys, Pewter

  • ✅ The Delft Clay Method is a highly refined form of sand casting that substitutes genuine Delft Clay from Holland for ordinary casting sand. The process was invented by Hans Karreman, a Dutch goldsmith. Delft Clay is much finer than casting sand, providing remarkably sharp and highly detailed castings in gold, silver, copper-based alloys, pewter, etc..
  • ✅ Castings require very little finishing work. Once you have cast your piece, the Delft Clay can be re-used. Since this is a cold-molding process, molds can be made from patterns composed of wood, wax, epoxy, plastics, and, of course, metal. Because this is a type of sand casting, it is best suited to producing castings without pronounced undercuts..
  • ✅ The Delft Clay Casting Kit includes: 4.4lbs Delft Clay, 2 - 60mm dia. Aluminum Ring Frame, and detailed instructions..
Check Stock

homEdge Carburetor Cleaning Tool Kits, Carb Carburetor Jet Cleaner for ATV, UTV, Motorcycle Moped Welder Carb, Jet Dirt Remover, Set of 10 Cleaning Needles + 5 Nylon Brushes + 13 Cleaning Wires Set

  • ...placed in the ultrasonic parts cleaner solution, and cleaning initiated, parts can be very quickly cleaned in an environmentally friendly manner..
  • Safe on All Metals and Non Toxic: This non toxic Ultrasonic Cleaning Solution for Carburetors is safe on all metals including aluminum, aluminum alloys, brass, cast iron, copper, copper alloys, ferrous metals, magnesium, yellow alloys, zinc, and coins. Does not contain borates, phenols, nitrates, SARA 313,EPA 33/50 listed ingredients, or butyl cellusolve..
Check Stock

110 Copper Sheet Unpolished Mill Finish Soft Temper ASTM B152 0.005 Thickness 12 Width 24 Length OnlineMetals

  • 110 copper, the workhorse of the copper alloys, exhibits good mechanical properties, excellent thermal conductivity, and electrical conductivity..
  • Copper 110 is typically used in decoratie as well as electrical and thermal projects..
Check Stock

CS Unitec | Copper-Beryllium Flat Head Industrial Screwdriver | Non-Sparking, Non-Magnetic, Corrosion Resistant | 1/4\ Tip x 4\ Round Shank, TUV Certified

  • CUSHION GRIP HANDLE: Flat head 4" length x 3/16" tip, Lanyard hole size .194".
  • NON-SPARKING: Specially manufactured with Copper- Beryllium alloys alloys for Non-Sparking, Non-Magnetic, and Corrosion Resistance. Safe to be used in hazardous environments, ATEX and EX Zones..
  • INDUSTRIAL QUALITY: Screwdrivers are designed to eliminate the risk of sparks at sites where explosive atmospheres may be present such as flammable or combustible vapors, liquids, dusts or residues..
  • NON-METALLIC: These alloys make them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets..
  • LIFETIME WARRANTY: Advanced forging technology ensures the high quality and refined appearance of all our products. We are offering warranty against breakage or performance failure under normal use..
Check Stock

Dowsing Rods Original Y Rod Design for Aura Divining Water Earth Geopathic EMF Gold Mining Chakra Underground Buried Items Made in USA

  • Dowsing Rods 100% Hand made - (1 imported bonus pendulum included - Size =7/8"x5/8").
  • Material Safe: We don’t use copper alloys nor copper coated materials.
  • Instructions, links to video sources and a printed board to use the pendulum.
  • Easy swing, Copper handles (4.5” or 11.5cm) and solid copper rods (12” or 30cm) - Best dowsing rods are made of copper as copper is the second conductive metal making it very sensitive.
  • Includes a gift Bag - Makes a great gift and nice protection to your set.
Check Stock

CS Unitec | Copper-Beryllium Phillips Head Industrial Screwdriver | Non-Sparking, Non-Magnetic, Corrosion Resistant | 3.5mm Tip x 4\ Round Shank, TUV Certified

  • CUSHION GRIP HANDLE: Flat head 4" length x 3/16" tip, Lanyard hole size .194".
  • NON-SPARKING: Specially manufactured with Copper- Beryllium alloys alloys for Non-Sparking, Non-Magnetic, and Corrosion Resistance. Safe to be used in hazardous environments, ATEX and EX Zones..
  • INDUSTRIAL QUALITY: Screwdrivers are designed to eliminate the risk of sparks at sites where explosive atmospheres may be present such as flammable or combustible vapors, liquids, dusts or residues..
  • NON-METALLIC: These alloys make them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets..
  • LIFETIME WARRANTY: Advanced forging technology ensures the high quality and refined appearance of all our products. We are offering warranty against breakage or performance failure under normal use..
Check Stock

Ququyi Pure Copper Flat Bar 5/32\ T × 0.8\ W × 8\ L Copper Sheet 110 Copper 99.9% Cu Metal Sheet for Jewelry, Crafts, Repairs, Electrical

  • Dowsing Rods 100% Hand made - (1 imported bonus pendulum included - Size =7/8"x5/8").
  • Material Safe: We don’t use copper alloys nor copper coated materials.
  • Instructions, links to video sources and a printed board to use the pendulum.
  • Easy swing, Copper handles (4.5” or 11.5cm) and solid copper rods (12” or 30cm) - Best dowsing rods are made of copper as copper is the second conductive metal making it very sensitive.
  • Includes a gift Bag - Makes a great gift and nice protection to your set.
Check Stock