Top Copper Forging

Uniweld Type17-30 Rosebud Heating Tip

  • Proudly Made in the USA and 100% Flame Tested.
  • Use with acetylene and oxygen to achieve temperatures up to 5600 degrees Fahrenheit.
  • Rosebud tips are your best choice for brazing, pre-heating, straightening, annealing, bending, forging, etc..
  • Overall length is 7 inches and is ideal for HVAC/R brazing up to 6 inch copper tubing in tight work space.
  • Type17 Tips fit United's Part No. 71 and Part No. WH550 Welding Handles.
Check Stock

VEVOR Hydraulic Pipe Crimping Tool, 8T Hydraulic Copper Tube Fittings Crimper, Copper Pipe Crimper 40CR Steel, Copper Crimping Pliers with Jaws 1/2'(12.7mm), 3/4'(19.05mm), 1'(25.4mm)

  • Excellent Crimping Ø12-25 MM: It features excellent workmanship and crimping performance, more labor-saving. Great for pipe fitting, it crimps the pipes in seconds, for 1/2", 3/4", and 1" pipes..
  • Premium Material: The pipe crimping tool is constructed of 40CR steel with punching and forging process and powder-coated treatment to ensure integrated mechanical property..
  • Ergonomic Handle: Safe handling with slip-proof rubberized handle grips, anti-static. The handle can be elongated to use the lowest energy..
  • Easy to Operate: The distance between two mechanical levers is adjustable. The interchangeable jaws can be changed effortlessly..
  • Wide Application: A labor-saving tool for copper pipe connection, not for PEX pipes and other pipes. Suitable for copper fittings and copper joints, clamping copper sleeve..
Check Stock

Uniweld Type17-15 Rosebud Heating Tip

  • Proudly Made in the USA and 100% Flame Tested.
  • Use with acetylene and oxygen to achieve temperatures up to 5600 degrees Fahrenheit.
  • Rosebud tips are your best choice for brazing, pre-heating, straightening, annealing, bending, forging, etc..
  • Overall length is 7 inches and is ideal for HVAC/R brazing up to 2-5/8 inch copper tubing in tight work space.
  • Type17 Tips fit United’s Part No. 71 and Part No. WH550 Welding Handles.
Check Stock

C.S. Unitec | Non-Sparking & Non-Magnetic Aluminum Bronze Socket Wrench Set |16pc 3/4 inch Drive Socket Set 1-5/16 to 2 inch,EX1540-KIT A

  • Our Tools are specially manufactured with Copper- Beryllium alloys or Aluminum Bronze alloys for Non-Sparking, Non-Magnetic, and Corrosion Resistance. Safe to be used in hazardous environments, ATEX and EX Zones..
  • This industrial quality hammer welding tool is designed to eliminate the risk of sparks at sites where explosive atmospheres may be present such as flammable or combustible vapors, liquids, dusts or residues..
  • Non-Metallic benefits of these alloys make them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets..
  • Advanced forging technology ensures the high quality and refined appearance of all our products.
  • LIFETIME WARRANTY: Advanced forging technology ensures the high quality and refined appearance of all our products. We are offering warranty against breakage or performance failure under normal use..
Check Stock

1060/1095 Damascus Sword Handmade Katana 40In

  • Each sword is individually handmade so specifications vary slightly from sword to sword.We specialize in the production of samurai swords, using professional and traditional Chinese sword forging process. We strive to make our products the best and satisfy our customers. Our products are exported to various countries, and They all received consistent praise..
  • We have been always following the traditional production process. All the steps including material selection, forge, quenching, polishing and grinding and final assembly are finished manually, so you can rest assured to buy..
  • This is a well-made damascus rotate whorls folded steel Katana, following the traditional Japanese process. The blade is very sharp and folded rotate 13 times resulting in 8,192 layers. The visible grain pattern on the blade comes from folding rotate the blade repeatedly during forging. The blade is then heat-treated, tempered, and oil quenched to achieve optimal levels of flexibility and hardness..
  • Fittings: With elaborate patterns on its surface, it is strongly made by Pure copper material, and not easy to be damaged, and its colors would not fade even for a long time. Each one comes in a different style, and you can choose according to your own preference..
Check Stock

TEKTON Cold Chisel Set, 3-Piece (1/4, 3/8, 1/2 in.) | PNC91002

  • Includes 3-pc. cold chisels: 1/4, 3/8, 1/2 in..
  • Cuts bolts, rods, and rivets, cleans off waste and slag, and shapes cast iron, steel, brass, bronze, copper, and aluminum.
  • Forged and machined from premium, high carbon steel.
  • Rough ground after forging, a second sharpening after heat treating produces a high-performance cutting edge.
  • Individual heat treatment allows the right balance of a hardened edge with a softer striking end.
Check Stock

VEVOR Plumbing Copper Pipe Crimper Press with 1/2 3/4 1 Jaws,Copper Tube Fittings Crimping Tool 40CR Steel Material,Pipe Press Copper Crimp Tool Suitable for Copper Fittings and Copper Joints etc

  • Excellent Crimping Ø12-25 MM: It features excellent workmanship and crimping performance, more labor-saving. Great for pipe fitting, it crimps the....
  • Premium Material: The pipe crimping tool is constructed of 40CR steel with punching and forging process and powder-coated treatment to ensure....
  • Ergonomic Handle: Safe handling with slip-proof rubberized handle grips, anti-static. The handle can be elongated to use the lowest energy..
  • Easy to Operate: The distance between two mechanical levers is adjustable. The interchangeable jaws can be changed effortlessly..
  • Wide Application: A labor-saving tool for copper pipe connection, not for PEX pipes and other pipes. Suitable for copper fittings and copper joints,....
Check Stock

TEKTON Long Cold Chisel Set 3-Piece 1/2 3/4 1 in | 66506

  • Cuts bolts, rods, and rivets, cleans off waste and slag, and shapes cast iron, steel, brass, bronze, copper, and aluminum.
  • Forged and machined from premium high-carbon steel.
  • Rough ground after forging, a second sharpening after heat treating produces a high-performance cutting edge.
  • Individual heat treatment allows the right balance of a hardened edge with a softer striking end.
  • Classic natural finish has a dry-touch rust-preventative coating.
Check Stock

IWISS Angle Head F1807 PEX Pipe Crimping Tool for Copper Rings - 1/2&3/4&1-inch Three Crimper Set with Cutter

  • 【Features】For 1/2”, 3/4”, 1” copper tubing pressing..
  • Automatic locking of pressing tongs. 360-degree rotating head.
  • Forging craft promises jaws to give pipe fittings an accurate press without scratches..
  • 【Ergonomic Design】Extendable handles for improved leverage. Creates leak-free connections, No more brazing, soldering or flaring. Ergonomic handle design and comfortable handle can minimize user fatigue..
  • 【Cutter & Deburring Tool】The cutter can quickly and easily obtain clean rounded cuts on pipes with outer diameter of 1/8" -1 1/4".
  • Deburring tool with high-quality speed steel 360 degree rotary mounting head.
  • Practical tools to make your project easier..
  • 【Wide Application】Compatible with Viega Copper, Pro-Press, Elkhart, Conex Pipe Fittings..
Check Stock

Klein Tools 63020 Multi-Cable Cutter Klein-Kurve

  • CRIMPING RANGE:Cable cutter crimping range 400mm²Max.For cutting copper wire or aluminum wire..
  • DO NOT CUT STEEL:The cable wire cutter is not suitable for steel,steel wire or steel core aluminum stranded wire..
  • FAST AND SHARPNESS:Sharp blade structure,Cutting easily with forging blade.Cuts flat and saves times..
  • HIGH HARDNESS:Forged with alloy material,not easy to rust,to be dull,not easy to corrode,durable..
  • ERGONOMIC DESIGN:Ergonomic engineering plastic handle,comfortable to hold,non-slip and durable..
Check Stock

2M Soft Copper Tube, OD 4mm x ID 3mm Copper Round Tubing Used in Manufacture of Wire, Cable, Brush, Compass, Aviation Instrument

  • ✔ 【Good Thermal Conductivity】 - The copper pipe used in manufacture of magnetism instruments or meters that need anti magnetic interference, such as compass, aviation instrument, etc..
  • ✔ 【Wonderful Plasticity】 - Easy to machining under hot and cold pressure, can be made into tube, rod, wire, strip, belt, plate, foil, etc..
  • ✔ 【Premium Performance】 - Fine ductility and corrosion resistance and weldability. Can be made into all kinds of semi-finished products and finished products by cold, warm forging..
  • ✔ 【Excellent Electrical oCnductivity】 - The copper hose commonly used in manufacture of wire, cable, brush(electric), etc..
  • ✔ 【After-sales Service】 - If you have any questions about our products, please contact us by email with no hesitate and we will do our best to solve your problem..
Check Stock

Ratcheting Cable Cutter, 400mm2 Aluminum Copper Wire Cutters for Cutting electrical wire as Ratchet Wire Cutters (400mm2)

  • Lock ratcheting wire cutter cutting range: 400mm²max. Cutting copper or aluminum cable, single and multiple wire easily with forging blade.
  • Anti-slip rubber hand guard offers secure grip, with safety lock to hold cable tightly. No need to hold wire with hands when cutting.Ratchet structure design of compact ratcheting cable cutter easily cut cable and can be used in tight areas.
  • High Carbon Steel copper ratchet cable cutter prolong it’s lifetime, well hardened blade insure sharpness and high-efficiency.
  • heavy duty ratcheting cutters for electricians, but not heavy when working with them. 0.95kg insure quality and easy carry.minimal effort needed when cutting.Lock release is on the back side..
  • Prime Item: Insure very quick replace or return, just give yourself a chance to try.Warm notice: Ratchet wire Cutter Not for cutting steel Or steel wire.
Check Stock