Top Copper Lag Screws

#17 x 6 Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - 100 Screw Count

  • Screw Dimensions - ~5/16" Thread Diameter - 11/16" Head Diameter - Length 6".
  • Manufactured from High Quality Heat Treated Steel, Triple Coated, ACQ Treated Lumber Compatible.
  • Corrosion Resistant Lag Screws Passed the 1200 Hour Salt Spray Test Without Coating Failures.
  • Type 17 Notched Extra Sharp Point for Quick Starts without "Walking", Reduces Need for Pre-Drilling.
  • Construction Lag Screws Far Exceed Standard Lag Bolts in Sear Compression Forces.
Check Stock

REDCAMP Indoor Hammock Hanging Kit Heavy Duty 304 Stainless Steel Hammock Wall Mount Kit 800 lb Capacity

  • EXPANSION SCREWS: This hammock hanging kit contains 2 expansion bolts and 2 lag screws. Expansion bolts are the best choice for concrete wall, lag....
  • HEAVY DUTY HAMMOCK HANGING HOOKS: the screws and washers are exceedingly heavy and thick, made out of 304 stainless steel and galvanized, support up....
  • PERFECT FOR BOTH INDOOR AND OUTDOOR USE: this set of high quality hammock hooks and carabiners can be adjusted to the ceiling of your garage or room,....
  • EASY AND FAST SET UP: This hammock holder is really easy to install, a spanner and a drill will be completely enough..
  • REDCAMP GUARANTEE: Your 100% satisfaction has always been our top priority. That is why all of our products are backed by our unconditional 365-day....
Check Stock

Hard-to-Find Fastener 014973269470 Lag Expansion Shields, 1/4 Short, Piece-12

  • Expansion shield anchors for use with lag screws are designed to anchor into concrete, brick, and block..
  • Expansion shield anchors consist of pre-assembled two-part expansion shields..
  • These anchors expand as a lag screw is fastened through the anchor..
  • These anchors feature very precise tapered internal threading to permit easy turning of the lag screw..
  • Zinc plating adds a layer of corrosion resistance to the anchors..
Check Stock

5 Steps Outdoor Hand Rails for Steps, Black Wrought Iron Handrail Kit

  • Railings for Outdoor Steps- This Iron Stair rail is designed to be a hand rail outdoor (also great replacement for wooden handrails)..
  • DIY Iron Handrail- Designed to be installed yourself!.
  • Versitle Installation- Can be used as outside hand railing, outdoor handrails, stair rails, hand rails for stairways, front porch hand rail (we provide flat mount bracket for free), etc.
  • Parts Included- Anchor bolts, lag screws, masonry drill bit & hex screw bit (some 2021 inventory in warehouse has older gold version anchors and no lag screws. Contact us for free hardware replacement if needed..
  • NOTE: For sale is a 5.5 feet railing (Intended for 4-5 steps).
Check Stock

Lag Bolt Kit for Mounting TV Bracket Into Wood Or Concrete - Includes Heavy Duty Bolts Fischer Concrete Anchors and 2 Drill Bits

  • Application: The lag bolt kit is suitable for concrete wall, wood studs and brick wall.
  • Qualtiy: High quality drill bits and screws ensure no stripping,wobble and breaking during the installation.
  • Note: Concrete anchors are not compatible with wood and drywall.
  • Package: The kit includes 4 lag screws, 4 concrete anchors, 4 washers,2 kinds of drill bits.
Check Stock

ENO Eagles Nest Outfitters Indoor Hanging Kit Take Your Hammock Inside

  • Bad weather, no problem: When you have the hammock itch, but the weather is crummy, the Indoor Hanging Kit allows you to create your own relaxation....
  • Master the art of lounging: Simply install the 2 anchor bolt hangers with the lag screws and washers to studs in your bedroom. Clip your hammock (not....
  • Trustworthy material: Falling is not an option, unless it's to sleep.The Indoor Hanging Kit features Z.P. Steel hardware and is designed to support up....
  • The full hammock experience: Every kit includes 2 anchor bolt hangers, 2 lag screws, 2 washers, 2 carabiners, and a detailed installation guide..
  • ENO gives back: ENO loves the outdoors and shows it by donating to organizations that preserve our wild places..
Check Stock

Steel DN Mate 60 Pack T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8' Deck Railing Kit, Cable Railing/Stair Deck Railing, DIY Hardware Kit, Wrench Included DM60

  • New deck railing design, clean and elegant. This cable railing kit includes 30 pcs left, 30pcs right hand thread lag screws, 1 patent design wrench, and 2 drill bits. Stainless Steel T316 material, anti-rust ,water and corrosion, marine Grade, good for indoor or outdoor usage. With our new made wrench, installation becomes much easier..
  • This deck railing hardware fit 1/8″ OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable..
  • Length of cable should be 1-1/2″ shorter than wood surface distance（as shown in pic.4).
  • if you want to DIY a high quality cable railing system, standard 1/8″ (OD) cable which was made of T316-stainless steel is recommended. Please search on amazon” B0B71J2DXD” if you need black lag screws..
  • By the design of Right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. And this cable railing won’t be easily unfixed or destroyeded..
  • The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle ....
Check Stock

ENO, Eagles Nest Outfitters Deluxe Hammock Hanging Kit, Take Your Hammock Inside, Charcoal

  • Bring the outdoors in: When you have the hammock itch, but the weather is crummy, create your own relaxation station inside with the Deluxe Hammock Hanging Kit.
  • Master the art of lounging: Simply install the 2 anchor bolt hangers with the lag screws and washers to the wall studs.
  • Clip your hammock (not included) to the hangers and let the relaxing begin.
  • Trustworthy material: Falling is not an option, unless it's to sleep.
  • The Indoor Hanging Kit features sturdy 6061 anodized aluminum hardware and is designed to support up to 250 pounds.
  • The full hanging experience: Every kit includes 2 anchor bolt hangers, 2 lag screws, 2 washers, 4 bolts and a detailed installation guide.
  • ENO gives back: ENO loves the outdoors and shows it by donating to organizations that preserve our wild places.
Check Stock

#14 x 4\ Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - Full Box - 500 Screw Count

  • Manufactured from High Quality Heat Treated Steel, Triple Coated, and ACQ Treated Lumber Compatible.
  • Corrosion Resistant Exterior Coated Screws Passed 1200 Hour Salt Spray Test Without Coating Failures.
  • .24 (#14) Thread Diameter, .508 Head Diameter Modified Truss Head Screw for Better Compression Force.
  • These Construction Lag Screws Far Exceed Standard Lag Bolts in Shear Compression Forces.
  • Excellent Screw for Decking, Fencing, Roofing, Framing, Timber Frame or Post, and Beam.
Check Stock

Leviton 1451-2IM 15 Amp, 120 Volt, Toggle Framed Single-Pole Ac Quiet Switch, Residential Grade, Grounding, 10-Pack, Ivory

  • Faster installation with combination of side wiring and quick wire push in wiring.
  • Terminal screws accept up to No.12 AWG copper or copper clad wire.
  • Quickwire push in terminals accept No.14 AWG solid copper wire only.
  • Large triple combination screws Robertson/Phillips/Slotted for fast wiring.
  • Impact resistant, durable thermoplastic toggle and frame.
  • Faster installation with combination of side wiring and Quickwire push-in wiring^Terminal screws accept up to No. 12 AWG copper or copper-clad wire^Quickwire push-in terminals accept No. 14 AWG solid copper wire only^Large triple combination screws Robertson/Phillips/Slotted for fast wiring^Impact-resistant, durable thermoplastic toggle and frame.
Check Stock

Copper Ridge Outdoors Platform Brackets - (Set of 4) - Elevated Platform Mounts, Powder Coated 11 Gauge Heavy Duty Steel, 4x4 Channels, Elevated Platform for Hunting Blind, Deer Stand Bracket 4x4

  • HEAVY DUTY: 11 gauge powder coated steel brackets provide strength to create your deer hunting blinds elevated platforms..
  • LARGE CHANNELS: Channels designed for 4 x 4 wooden posts horizontally and vertically, 3 5/8 inch internal channel width, allowing you to customize your elevated blind platform to any size using your own lumber..
  • SECURITY MINDED: Elevated Platform Brackets mounts are pre-drilled for lag screws to secure the lumber to the mounting 4x4 corner brackets..
  • EXTREME STABILITY: 7 degree outward angled legs provide a solid base to build your elevated deer blind platform upon..
  • Copper Ridge Outdoors Elevated Platform Mounts (Set of 4) weighs 34 lbs..
Check Stock

Leviton 1451-2TM 15 Amp, 120 Volt, Toggle Framed Single-Pole Ac Quiet Switch, Residential Grade, Grounding, 10-Pack, Light Almond

  • Faster installation with combination of Side wiring and quickwire push-in wiring.
  • Terminal screws accept up to no. 12 awg Copper or copper-clad wire.
  • Quickwire push-in terminals accept no. 14 awg solid Copper wire only.
  • Large triple combination screws robertson/Phillips/slotted for fast wiring.
  • Impact-resistant, durable thermoplastic Toggle and Frame.
  • Faster installation with combination of side wiring and Quickwire push-in wiring^Terminal screws accept up to No. 12 AWG copper or copper-clad wire^Quickwire push-in terminals accept No. 14 AWG solid copper wire only^Large triple combination screws Robertson/Phillips/Slotted for fast wiring^Impact-resistant, durable thermoplastic toggle and frame.
Check Stock