Top Copper Straight Tubes

ACTION Black Coin Holder

  • CoinSafe tubes for Quarters are built with high quality materials designed to provide your coins with long-term, safe preservation. Square CoinSafe tubes have strong and sturdy caps that snap to the tube base firmly..
  • Made in the USA, CoinSafe coin tubes allow collectors to place the Quarter coins straight into the tubes..
  • All Quarter coin tubes from CoinSafe have their caps stamped with the word "QUARTER" to avoid confusion with other denominations..
  • As a world leader in coin protection, CoinSafe has a commitment to manufacture the highest quality coin tubes on the market..
  • Each tube holds 40 Quarter coins. No coins are included. Sold Individually..
Check Stock

HEELYS Boy's Pro 20 Prints (Little Kid/Big Kid/Adult) Charcoal/Grey/Camo Men's 8 M

  • ...ith an 8-inch rim diameter and a tire width that is between 8 inches to 10 inches. Check your tire's sidewall. If it indicates that your tire size is 20x8.00-8", 20x10.00-8", 19x7-8'', 18x6.50/7.50/8.50/9.50-8'', then these 2-pack inner tubes are a perfect fit for your tires..
  • UNIVERSAL FIT INNER TUBES WITH TR4 STRAIGHT VALVE STEM - These inner tubes are compatible with riding lawn mowers, tractors, golf carts, garden trailers, tillers, snowblowers, and ATVs. The TR4 straight valve stem is the standard for universal inner tubes for lawn mowers and other utility inner tubes. This valve stem is covered with rubber and has a 1.5-inch offset from the center of the tube..
  • Its rated maximum psi is 60. At 1.38 inches long, it fits 1/2-inch rim holes and can be adapted for up to .625-inch rim holes with the use of B6 rim bushing..
  • SAFETY FIRST WITH EXPLOSION-PROOF AR-PRO INNER TUBES - Avoid explosive punctures with an inner tube that creates an almost instantaneous airtight seal around punctures. This prevents both damage on the vehicle and injury on your part. And with the internal sealing, you can be kept safe in any season or weather..
  • EASY NO-TOOL INSTALLATION - In a rush? You definitely don't have a lot of time to waste even on a regular day. Thankfull....
Check Stock

(2-Pack) Universal Fit 3.00-14 Dirt Bike Inner Tubes - 90/100-14” Rear Inner Tube Compatible with 125cc and 140cc Pit Pro Bikes, Trail Bikes, Dirt Bikes, and Foot Bikes - Explosion-Proof Inner Tubes

  • ...uld punctured inner tubes deflate, but they can also explode and cause damage to your bike and injury to you, the rider. Our line of replacement inner tubes have self-sealing properties that prevent explosive punctures by creating instantaneous air-tight seals around puncture holes. Your safety is our priority!.
  • TR4 STRAIGHT VALVE STEM FOR HIGH TORQUE APPLICATIONS - This centered straight valve stem is compatible with most rims. It has a round base with the valve stem secured to the rim with nuts and washers. You’ll find this type of valve stem on relatively low psi motorcycle and ATV/UTV tires..
  • ENJOY AN IMPROVED RIDING EXPERIENCE - Made from butyl rubber compound, these inner tubes provide better elastic damping than other types of inner tubes. And as they are also thicker than average inner tubes in the market, the vibration dampening action doubles, enabling the inner tubes to work effectively in tandem with the bike’s suspension system to provide you with the most comfortable ride..
Check Stock

Quercetti Saxoflute – 16 Piece Build Your Own Instrument Set

  • ...tivity and hone physical skills. Quercetti toys span a wide range of categories and stages, from early skill builders to craft activities, pure educational products to advanced construction sets..
  • PRODUCT SPECIFICATIONS: Package contains (1) Quercetti Saxoflute – 16 Piece Build Your Own Instrument Set. Includes: 3 straight tubes with holes, 1 whistle, 1 trumpet end and 11 straight tubes and L-shapes in 2 colors. Fully compatible with other tubation building sets (sold separately)..
Check Stock

Libraton Copper Tube Cutter 1/4" to 2-3/4", Tube Cutter, Heavy-duty Tubing Cutter for Copper Pipe with Deburring Tool

  • [High-quality Blade] Libraton pipe cutter blade is made from aluminum alloy, wear-resistant. It will never get rust..
  • [Reasonable Design] The tubing cutter is attached with a bearing, fitted on the roller to make the rotation smoother and clean..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube. Cutting range is up to 2-3/4" (70mm)(OUTER DIAMETER)..
  • [Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, and THIN stainless steel tubes).
  • [Cutting Efficiency] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
Check Stock

iCrimp Copper Tubing Cutter, 3/16-inch to 1-1/4-inch Tube Cutter, for Stainless Steel, CSST Tubing Cutter with 2 Pack Replacement Blades

  • Metallic Tubing Cutter: CT-532 pipe and tubing cutter is designed for cutting copper, brass, aluminium, thin-walled steel, 5-32mm(3/16’’ to 1-1/4’’). Made from aluminum alloy and Wear-resistant steel blades ensures a durable and sturdy usage.Ergonomic knob reduce fatigue..
  • Neat Cutting: This pipe cutter makes fast, easy cuts in standard pipes. With clean, no burrs and smooth cuts on copper tubes and corrugated stainless steel tubing without deforming the peaks of corrugations..
  • Smooth Operation: Professional Tubing Cutter features an accurate 6-roller tracking system. This keeps the tube from threading and helps eliminate spiraling. The rollers and the blade utilize ball bearings for smoother action on thin stainless steel, all soft tubes like aluminum, copper, and PVC..
  • Free Cutter Wheel: Replacement blade is constructed with high carbon steel for long life. Precision grinding delivers a sharp cutting edge. Optimized for cutting copper tubing..
  • Applications: Perfect for industrial plumbing, HVAC applications, this pipe cutter high grade cast malleable steel frame and hardened alloy steel rollers for added durability. Also ideal for installation of Sharkbite Push to Connector fittings when creating copper tubing diversions..
Check Stock

Libraton Copper Cutter, Tubing Cutter with Deburring Tool Heavy Duty Mini Pipe Cutter for Copper Pipe, Aluminum Pipe, Thin Stainless Steel Pipe

  • [High-quality Blade] Libraton pipe cutter blade is made form aluminum alloy, wear-resistant. It will never get rust..
  • [Reasonable Design] The tubing cutter is attached with a bearing, fitted on the roller to make the rotation more smoother and clean. Strong corrugated knob for comfortable stable operation..
  • [Wide Application] The copper tube cutters' cutting range is up to 2" (50mm)(OUTER DIAMETER). The Mini Tubing Cutter is designed to cut Copper, Brass, Aluminum, Thin Steel and PVC Pipes with 1/8" to 1-1/8" ( 4-28mm ) Outer Diameter OD..
  • [Usable Attchament] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes).
  • [Easy To Operate]: Rotate the knob to grip tube, revolve copper tubing cutter around the tube, tighten grip smoothly after each full circle until full cut. Please let us know if you have any problem with this copper tube cutter. Our service team promise to reply to any of your messages within 24h..
Check Stock

AB Water to Air Heat Exchanger 12x15 1' Copper Ports Hot Water Coil For Hot Air Wood Furnace Plenum

  • 【Premium Quality】Our water to air heat exchanger features 12x15 strong steel casing surrounds the body of the heat exchanger for support. Sweat connection size depends on model. 12 aluminum fins per inch and 3 rows of 3/8" seamless copper tubes maximize heating or cooling efficiency..
  • 【Convenient For Use And Energy Saving】This new style chilled water cooling coil can be easily installed by just slipping it into the plenum.  You will not need any special tools to install. Highly conductive material make good performance and economy for heating transfer and cooling without electricity consumption and oxygen consumption..
  • 【Product Parameter】65,000 Btu CAPACITY: Depending on the application, this heat exchanger can produce up to 65kBtu per hour. 1" copper sweat ports,12 aluminum fins per inch and 3 rows of 3/8" seamless copper tubes : High quality fins and tubes help to heat the air in your home..
  • 【Multiple Applications】AB water to air heat exchanger offers the highest level of thermal efficiency and durability in a compact & lightweight unit, perfect for Outdoor Wood Furnaces, Residential and Commercial Heating and Cooling, Forced Air Heating, Hybrid Systems, Air Conditioning, Dehumidification, Inverter Cooling and so....
Check Stock

CoinSafe Dime Tube - Each Tube Holds 50ea Barber Mercury and Roosevelt Dime Coins

  • CoinSafe tubes for Barber, Mercury, and Roosevelt Dime coins are built with high quality materials designed to provide your coins with long-term, safe....
  • Made in the USA, CoinSafe coin tubes allow collectors to place the Dime coins straight into the tubes or if collectors prefer storing wrapped coins,....
  • All Dime coin tubes from CoinSafe have their caps stamped with the word "DIME" to avoid confusion with other denominations..
  • As a world leader in coin protection, CoinSafe has a commitment to manufacture the highest quality coin tubes on the market..
  • Each tube holds 50 Dime coins. No coins are included. Sold Individually..
Check Stock

Libraton Pipe Cutter Tubing Cutter 3/16 to 2 Outer Diameter Copper Pipe Cutter Tube Cutter with Deburring Tool Copper Cutter Pipe Cutter Tool for Copper and Thin Stainless Steel Tube

  • [High-quality Blade] Libraton pipe cutter blade is made from SKD-grade material, wear-resistant. It will never get rust..
  • [Reasonable Design] The tubing cutter is attached with a bearing, fitted on the roller to make the rotation more smoother and clean..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube. Cutting range is up to 2" (50mm)(OUTER DIAMETER)..
  • [Usable Attchament] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel blades. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes).
  • [Cutting Efficiency] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
Check Stock

EZARC Pipe Cutter - Tubing Cutter Set with Mini Tube Cutter, Copper Pipe Cutter Tool 3/16\ to 2\ Outer Diameter for Cutting Aluminum PVC Thin Stainless Steel Tube

  • ...s with an outer diameter of 3/16 to 2 inches and a thickness of 1/10 inch. The mini tubing cutter is designed to cut through 1/8 to 7/8-inch pipes, with a maximum thickness of 1/10-inch. It is particularly useful in tight spaces where a full turn is not possible..
  • ✅【Exquisite Craftsmanship】This heavy-duty copper tubing cutters are made with heat-treated SKD-grade material cutting wheels and high-grade steel construction. This exquisite craftsmanship ensures they can effectively cut pipes made of aluminum, copper, PVC, as well as thin stainless steel tubes..
  • ✅【Clean & Precise Cut】EZARC professional copper pipe cutter set comes equipped with 6 individual bearings that allow for increased cutting speed. Precise rolling control ensures that each cut is smoother and more accurate, resulting in a cleaner and more precise cut during pipe cutting..
  • ✅【Various Cutting Materials】Our copper pipe cutter is versatile and can cut pipes with an outer diameter ranging from 1/8" to 2". It's perfect for cutting heavy-duty hard materials such as thin stainless steel, as well as all soft tubes like aluminum, copper, and PVC..
  • ✅【Cutting Efficiency】Our copper cutter features a solid ergonomic PVC knob located at the bottom, providing stability whil....
Check Stock

Walker Exhaust SoundFX 17837 Exhaust Muffler

  • RESISTS CORROSION -- Aluminized steel construction and internal drainage system helps reduce corrosion.
  • BUILT TO LAST -- Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion....
  • FLEXIBLE SOLUTION -- Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for....
  • FACTORY SOUND -- Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes.
  • GET MORE MILES FROM YOUR MUFFLER -- Designed and tested to extend muffler life.
Check Stock