Top Copper Strip 25mm

6 Pieces 4 Pin RGB Extension Cable LED Strip Connector Cord Wire Solderless Strip Jumper Cables Kit with 12 Pieces Pin Connector for 5050 3528 RGB LED Strip Light (Black, 1.6 FT, 3.3 FT, 6.6 FT)

  • What you get: the package includes 6 pieces of 4 pin RGB extension cable LED strip connectors and 12 pieces 4 male pin plugs for 10 mm 5050/ 3528 RGB waterproof and non-waterproof LED strip light.
  • 3 Different sizes: the length of the LED strip connector cable is 50 cm/ 1.6 ft, 1 m/ 3.3 ft, 2 m/ 6.6 ft, which can meet different DIY needs.
  • 2 Major functions: the RGB extension cable can be connected to IR/RF controller and 5050/ 3528 LED strip to extend the strip to reach an nice position.
  • Or it can be connected between 2 RGB LED strips, which is convenient and practical.
  • Easy to install: with 2 pre-welded female connectors and 12 pieces 4-pin male plugs (copper plated), the installation of these light strip extension cords do not need to be soldered and without tools, saving time.
  • Quality material: the insulation of the LED light strip extension cord is made of PVC material, which is corrosion-resistant.
  • The wire contains 4 strands of tin-plated pure copper wire, which is oxidation-resistant, flexible and durable.
Check Stock

Ultra-Small RPi GPIO Terminal Block Breakout Board Module, for Raspberry Pi

  • The item has been soldered and assembled. Support for Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, Pi Zero-W..
  • Terminal block pitch 2.54mm/0.1", wire size range 28AWG to 18AWG, strip length 4.5mm, screw M1.6 steel, pin header and cage copper..
  • FR-4 fiber glass PCB, dual copper layers..
  • 2x20 positions header connect to Raspberry Pi board..
  • Packing list: 1x terminal block breakout module, 4x M2.5x6mm screws, 4x 10mm nylon standoffs. 2x 11.5mm brass standoffs, 1x small slotted screwdriver (NOTE: the item not include Raspberry Pi Board)..
Check Stock

10 Packs Solderless LED Strip Connector, Transparent Track Lighting Connectors, Wire Strip Lights, 16.4 Feet LED Strip for LED Pin Connector (Simple Style,5 Pin, 10 mm)

  • ... peeling off waterproof cover, which is easy and convenient, saving your time and energy.
  • Firmly apply: the LED light connectors are made of quality material, transparent, tough and safe, which can make your light strips more awesome in reducing the dark area.
  • While the LED strip light wire adopts quality tin plated copper material, sturdy and safe, providing a long term service for you.
  • Easily operate: you need to insert LED strip light wire into the guide slot and then press cap down, align the soldering pads of the light strip surface with the pins on the LED light strip connectors, then check the positive and negative poles are correct.
Check Stock

ELECFUN Wire Spade Connectors 22-10Ga Kit 208pcs Quick Disconnect Terminals Insulated Male Female Wire Spade Connectors Kit 10-22 AWG Electrical Terminal Extra Copper Sleeve Protect

  • ☛ High-quality: Our electrical connectors comply with ROHS and UL approved. A.W.G.: 24 -10.
  • ☛ Premium Material: These spade connectors are made from high-quality brass strip, copper tubular ( finished by tin-plated ). PVC insulation..
  • ☛ Extra Protect: Extra copper sleeve structure design makes wire easy to insert, also Increases the wire crimping effect..
  • ☛ Package including: 208pcs male and female spade connectors, 80pcs 22-16 AWG(Red electrical connectors), 80pcs 16-14 AWG(Blue electrical connectors), 48pcs 12-10 AWG(Yellow electrical connectors). Width: 0.25 inch..
  • ☛ Wide Application: The insulated female male spade terminals are ideal for automotive, marine boat use, household electrical connections, and many other applications..
Check Stock

Nickel-plated Pure Copper Strip; 8mm wide x 0.15mm thick flat wire (Nickel Plated Copper, 10 Feet)

  • Pure copper core, pure nickel plated, flat wire.
  • 8mm wide by 0.15mm thick strip is perfect for applications requiring high currents.
  • Half the resistance of pure nickel strip. Rated 20A..
Check Stock

tatoko 10PCS Mini Fast Wire Connector Universal Wiring Cable Connector Push-in Conductor Terminal Block Two in and Six Out

  • Solid conductor《BV》:0.08-4.0mm²/28-12AWG. Stranded conductor《RV》:0.08-2.5 mm²/28-14 AWG.
  • Rated Voltage: 250V-4KV，Rated Current: 32A,.
  • Material: Nylon+ Copper，Contact material: Copper tin plated,Strip length:10 mm/0.39 inch.
  • Package List: 10 x (2 in 6 out) Terminal Block.
Check Stock

Electronics-Salon Screw Terminal Block Breakout Module, for Arduino MEGA-2560 R3.

  • Terminal Block Breakout Module - for Arduino MEGA-2560 R3. the item has been soldered and assembled..
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
  • With power on LED indicating. red reset button on the side. with a ICSP adapter connect header..
  • FR-4 fiber glass PCB, dual copper layers..
  • NOTE: the item not include Arduino Mega module.
Check Stock

Vbakor 25FT RV Underglow Led Lights Kit, 12V Camper Underbody Lights for Motorhome Travel Trailer Concession Stands Food Trucks, RV Awning Light, RV Led Strip Lights

  • ...rior lights can be easily cut and linked with other light strips to get your desired length, which can be cut every 3 Leds along the cutting marks. You can DIY the length of the Led lights for your RV..
  • 【Flexible Design & Easy to Install】: The Lights Using flexible copper circuit board, you can gently bend it, Please NEVER rudely bend it to right or acute angle, otherwise the circuit board and silicone coating will crack. The strip lights can be cut between every 3 LEDs along the cutting marks to fit for your project, great for DIY. The light strip comes with strong 3M back adhesive, mounting clips to help keep the boat light strip stay in place..
  • 【Safe & Waterproof】: This LED strip light is fully covered with water-resistant glue. Waterproof rating is IP65, It can withstand the rainy and snowy weather and protect LED from damage, greatly extend the life of the strip lights to 50,000 hours or more. LED strip with operating voltage of 12V, low heat, no radiation, no flicker, harmless to the human eye, it can be touched by children..
  • 【Wide Application】: Camper Awning Lights are Special Designed for RV, Cam....
Check Stock

10-Pack L Shape LED Connectors and 10-Pack Strip to Strip Jumpers, JACKYLED 10mm Wide 4 Pin Gapless Solderless RGB Connectors for 3528/5050 SMD LED Lights

  • L SHAPE LED CONNECTORS: Made from fireproof material, the L shape 4 pin connectors can withstand high temperatures. And the plastic is thick and solid, which is not be broken easily..
  • RGB STRIP TO STRIP JUMPERS: Our 5050 4 pin led connectors with 17 strand tin-plated oxygen-free copper inside each circuit, the wires are thicker than most of the other rgb led strip jumper in the market, features stronger physical features. These led light strips connectors are flexible and durable enough for bending or twisting in ANY ANGLES without breaking..
  • APPLICATION: Fits all 10mm wide 3528/5050 RGB LED strips, perfect for LED tape DIY project..
  • EASY TO USE: The L Shape 10mm 4 Pin LED light Connector is easy to install. Simply slot the strip light into connector and clamp the cover (no need to solder), ideal for right angle corner strip connection. One of the cable end contacts of the led strip jumper connectors were soldered already, the other side contacts are open to stick in..
  • PACKAGE: 10pcs l shape led connectors, 10pcs led jumpers.
Check Stock

1769-OA16 Compact I/O 16 Point Output Module 1769OA16 1 Year Warranty

  • Pitch 3.81mm/0.15" screw terminal block..
  • Terminal block: wire range 26-16AWG, strip length 5mm, Metric M2 slotted screw..
  • FR-4 fiber glass PCB, dual copper layers..
  • Module Dimensions: 83mm x 87mm x 45mm (W x L x H)..
Check Stock

8Pack 5 Pin RGBW Connector Waterproof Led Strip to Wire Connector, Transparent Solderless Connector for 12mm Led Strip Light, 16.4ft Extension Cable

  • 【Solderless】Connect strip to wire without stripping insulation, no soldering, no need to peel off waterproof cover, quick and flexible connection..
  • 【Compatibility】The transparent strip to wire connectors can not only be compatible with 5V, 12V, 24V LED light strips, but also suitable for 12 mm LED strip lights and 22 AWG 5 conductor wires..
  • 【Easier Installation】Insert wires into the connector guide slot and then press cap down, align the soldering pads of the light strip surface with the pins on the LED light strip connectors, finally check the positive and negative poles are correct..
  • 【Premium Quality】The newest transparent LED strip light connectors are more stable and easier to install than ever. PVC plastic wire cover and tin plated copper core ensure steady, safety and long-lasting connection..
  • 【What you get】 The package includes 8 pack 5pin rgbw transparent led strip connectors and 16.4 feet light strip cable, strip to wire quick connection, perfect to satisfy connection needs..
Check Stock

Screw Terminal Block Breakout Shield Module for Arduino UNO R3

  • Terminal Block Breakout Shield Module - for Arduino UNO R3. the item has been soldered and assembled..
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
  • Standard IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment..
  • With power on LED indicating. red reset button on the side. with a ICSP adapter connect header. FR-4 fiber glass PCB, dual copper layers..
  • NOTE: the item not include Arduino Uno module..
Check Stock