Top Copper Surface Treatment

EKLOEN Solid Brass Pen Sign Pen Portable EDC Pocket Pen Ballpoint Pen with Ring

  • Short Frosted Length: 4.3 inch, Weight: 1.2 ounce.
  • Solid brass made, precise cutting craft, strong and unbreakable..
  • With a ring on the pen cap, very convenient to carry..
  • Carefully polished.Plating surface without any other treatment..
  • Due to the characteristics of copper,with the use of the use of time,its surface will gradually oxidized to form a unique retro charm..
Check Stock

uxcell Antenna Extension Cable SMA Male to SMA Male Coaxial Cable RG58 50 Ohm 6 ft 2pcs

  • RG58 6-Feet SMA Male to SMA Male Ultra Low Loss Antenna Extension Cable.
  • Connector Type: SMA Male(Pin in center) to SMA Male(Pin in center).
  • Pure copper coaxial cable will be low loss for Wi-Fi Router, PCI Card, Access Point..
  • Made of pure copper with great connectivity (Not Alloy), gold-plated surface treatment and low-loss 50ohm impedance.
  • RG-58 means far less attenuation than cables made from thin RG316 or RG174.
Check Stock

The Paris Apartment: A Novel

  • ...Pcs per pack of 1/0 Guage (AWG) 3/8″ ring terminals, copper lugs closed end termination ring terminals with 10 Pcs 3:1 Dual Wall Adhesive Heat Shrink Tubing Tube for your work(5pcs Black and 5pcs Red)..
  • 【Quality Material:】 The TKDMR bare copper battery cable ends are made from 100% annealed copper with special treatment surface for corrosion protection, providing a high degree of conductivity for maximum current flow. Can be Crimped or Soldered.The 3:1 shrink tube is well made of high quality material(UL & CSA certified for up to 600V,257℉）, thick and durable than 2:1 shrink tube..
  • 【Reliable and Easy to Use:】These battery lugs with heavy duty construction,improves high temperature durability and have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation.
  • high standard flared opening for easy wire insertion.The wire shrink wraps are all pre-cut into the most common sizes which improve your work efficiency..
  • 【Wide Applications:】These Copper Lugs works with Heat Shrink Tubing which are safe and reliable , greating for distribution box, golf carts, solar panels, marine,home applications,Vehicle,Motorcycle,DIY Electrical Wirings and ....
Check Stock

EKLOEN Mini Size Solid Brass Pen Portable Delicate Signature Pen Six-Edge Ballpoint Pen

  • MINI SIZE: the length is only 3.5 inch, Weight: 1.5 ounce.
  • MINI SIZE,it's very convenient to carry..
  • Solid brass made, precise cutting craft, strong and unbreakable..
  • Carefully polished.Plating surface without any other treatment..
  • Due to the characteristics of copper,with the use of the use of time,its surface will gradually oxidized to form a unique retro charm..
Check Stock

SIGNI Copper Plated Steel Wire Drawing Polishing Burnishing Wheel for surface finishing of Stainless Steel Aluminum Metal and Wood Copper coated steel wire 0.5mm

  • For the surface treatment of stainless steel, aluminum, copper and other metal products.
  • Especially suitable for processing workpieces with irregular shapes.
  • Not burning the workpiece surface, durable and efficient, self sharpening (anti blocking).
  • High finish, strong cutting force, long service life and clear lines.
  • It is mainly applicable to the modification of surface grinding and surface treated metal sheet.
Check Stock

Bass Big Horn The Sousaphone Subwoofer All Brass Band Drum Horn Team Bass Tuba Horn Brass Instrument

  • The stainless steel piston has a very smooth and fast action, which can improve agility and playability.
  • The detachable valve section is ideal for full access to areas normally inaccessible to maintenance technicians.
  • This Sousaphone horn is made of special brass for wind music, and the ratio of copper, zinc, tin and nickel is very stable. This makes the wind instrument have a transparent and full tone and good resonance..
  • Tonality: B lower, material: brass white copper, surface treatment: lacquered gold.
  • Nozzle diameter: 660mm, inner tube size: 18.5mm.
Check Stock

Bon Tool 01-177 Bon Mini Brick

  • It Is a roll which is around 5 inch width, 100ft Length.Can cut to any size as you need.Soft enough and not easily hurted..
  • Application: Used for holes cracks, pipes enter siding and foundation eaves, roof tiles, retractable awnings, behind signs, can block unwanted holes..
  • Environmentally:Never rust and will not leave rust stains on brick or wood..
  • Nonflammable:100% Copper, not Copper Alloy, better than Steel Wool, as the wool is easy get fire..
  • Special Treatment: The copper mesh never be bitten because our special treatment..
Check Stock

Celeb Luxury Gem Lites Colorditioner Semi-Permanent Professional Hair Color Depositing Conditioner Fire Opal

  • UNIQUE FORMULA: Unlike other color depositing conditioners, Color Mask Red Copper Hair Treatment gives your hair strength and nourishment with the....
  • VIBRANT RED COPPER PIGMENT: Color Mask Red Copper Toning Treatment deposits vibrant red copper / orange pigment in copper, red and brown colored hair.....
  • VEGAN: Color Masks are 100% vegan and sulfate free, for a non-drying effect. The plant-based proteins and amino acids strengthen your hair and give it....
  • CRUELTY-FREE: The entire Four Reasons product line is cruelty-free, and never tested on animals. Our packaging is made with sustainable materials..
  • REFRESH HAIR COLOR: Use instead of a regular conditioner whenever your hair color needs to be refreshed. Note that your hair’s porosity, condition....
Check Stock

[5 in 1]Swaging Tool Copper Tube Expander Manual Copper Pipe Swage Too Expander Drill Bit Soft Copper tubing Tool bit with for HVAC Repairing Air Conditioner

  • Material:This Manual tube expander is bearing steel material, blackened surface treatment process to prevent pipe drill bit rusting..
  • Contains: 6pcs hexagonal handle tube expander + 5pcs bell mouth expander,Air Conditioner Copper Tube Expander Tool Drill Sets.
  • Specifications: 7/8 (22.2mm), 3/4 (19mm), 5/8 (15.9mm), 1/2 (12.7mm), 3/8 (9.5mm), 1/4 (6.3mm).
  • Function: When the air conditioner is installed, expand the copper pipe to make the two copper pipes interconnected. (It needs to be installed on a hand electric drill).
  • Operation method: according to the expanding pipe diameter, select the corresponding expanding head and install it. In order to prevent the edge of the pipe from cracking, the tip of the expanding head should be used to expand the pipe. Then insert the whole expanding head into the copper tube and apply force evenly until the cup mouth is formed..
Check Stock

ARES 48001 – External Rotary Deburring & Chamfer Tool (13-36mm) – 3/8-Inch Shank for Use with Drill or Hex Driver - Clean and Repair Threaded Fasteners, Studs, and Bolts

  • ...l diameters of 1/8″-3/4″ (3-19mm) and internal diameters of 1/8″-5/8″ (3-16mm). Deburring chamfer tool set features quick release shank fits all handheld and stationary drills..
  • 【Exquisite Crafts】The internal countersink chamfer is made of M2 high-speed steel, and the surface is black nitrided after heat treatment. The head of the external deburring chamfer is cast with zinc alloy, and the surface is black and bright electrophoretic treatment. 3 pieces of YG8 carbide blades provide better performance and longevity than high speed steel blades..
  • 【Easy to work】Attaching the deburring external chamfer tool to the end of your power drill, Use the speed on the drill bit between 0-400 RPM, and then slightly applying pressure to remove the burr. Do not use impact mode..
  • 【Safety Design】The accurate deburring external chamfer tool easily shaves the outer rough edge of bolts, newly-cut pipes or rods, removing burrs to keep edges smooth. Quickly repairs damaged bolts and tightens the nuts in place without hurting your hand, no sparks, and no burns.
  • Simplifies the repair process. The internal deburring tool with 5 flute bit design allows it drilling smoothly in metals, and it can even drill counter sinks..
  • 【Wide Application】Effective on metal....
Check Stock

PUOSUO Six-Edge Solid Brass Pen Bolt Action Pen EDC Pocket Pen Signature Pen Pocket Pen Black

  • Hollow out hexagonal prism design,no worried about falling down from the desk easily and easy to grip..
  • Solid brass made, strong and unbreakable.Precise cutting craft..
  • Carefully polished.Plating surface without any other treatment..
  • Due to the characteristics of copper,with the use of the use of time,its surface will gradually oxidized to form a unique retro charm..
Check Stock

Sopko 200-1 L.H. 2-1/4\ Diam Grinding Wheel Adapter for 1/4\-1/2\ Wheel Width

  • Hight quality rubber head, designed with mandrel mounted metal shank.
  • Head Shaped: Cylinder shaped and Bullet shaped, different shape for a different job.
  • Fit for Tool, Electric Drills, Electric Grinders or other Rotary Tools.
  • Nylon grinding heads are used in stainless steel, copper, aluminum, marble, furniture, etc..
  • polishing Uses: Used on electromechanical drills for electric grinders. Non-woven nylon heads with handles are mainly used for the surface decoration of various materials such as metal, wood and plastics. They are used for surface treatment, polishing, deburring, cleaning and reconciliation, etc.,.
Check Stock