Top Copper Tube Fitting

SeonFook 6 PCS Swaging Tool Drill Bit Set 1/4-Inch Hex Shank HVAC Tool Copper Pipe Flaring Bits Portable Tube Expander Drill Bit Repairing Kit 1/4 3/8 1/2 5/8 3/4 7/8

  • 【Swaging Tools】 Come with 6 different sizes: 7/8'', 3/4", 5/8", 1/2", 3/8", 1/4".
  • Hex Shank Diameter: 1/4 inch. They can meet your various work....
  • 【Flaring Bit Set】Made of high quality bearing steel for durability and long life. Flares drill bits have high and uniform hardness and wear....
  • 【Pipe Expander】The innovative drill bit expander for expanding tubes using heat by friction way more surface of between the flare and the Valve.....
  • 【Copper Pipe Swaging Tool】When air conditioning is installed, expand copper tube, make two copper tube mutual link (The drill bit is installed on....
  • 【Drill Bit Expander】This swages tool present a perfect depth and a tight fitting, which will make the brazing easier, reducing the fatigue stress....
Check Stock

uxcell Brass Compression Tube Fitting 10mm OD Tee Pipe Adapter for Garden Water Irrigation System

  • Fitting Tube Size: 10mm / 0.39" Outer Diameter (O.D.).
  • Brass for corrosion resistance, ductility at high temperature and low magnetic permeability..
  • Can be used with copper, brass, aluminum and plastic tubing. Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications..
  • NOTE: Only used for irrigation or hydraulic systems, NOT allowed to be installed for potable water..
Check Stock

Dracaena 2 pack G1/4\ thread to 12mm OD Hard Tubing Compression Fitting with Sealing Ringsfor Rigid AcrylicTube for Computer water cooling system ,Black

  • Compatible tubing: solid Acrylic-, Copper-, Brass- or Stainless Steel tube.
Check Stock

Bulkhead Straight Push Brass Oil Pipe Fitting 4 6 8 10 12 14 16mm OD Tube Compression Ferrule Tube Compression Fitting Connector,OD Tube 6mm

  • Fit For Tube Outer Diameter: 4 6 8 10 12 14 16mm (0.16"/0.24"/0.315"/0.395"/0.47"/0.55"/0.63" inch).
  • Fit For Tube Material:PU / Nylon ,Polyurethane.
  • Material / Surface:Copper nickel plating.
  • Package Content: 1 Pcs X Compression Fitting.
Check Stock

LASCO 19-5513 Straight Ball Valve Compression Fitting with Integral Sleeve Nut, 3/8-Inch OD Tube and 3/8-Inch Female Pipe Thread, Nylon/Plastic

  • Nylon compression fitting with integral sleeve nut.
  • 3/8-inch od tube x 3/8-inch female pipe straight valve.
  • No need to disassemble fitting, just loosen the nut insert tubing, then tighten.
  • Use on copper, PEX, poly and aluminum tubing.
Check Stock

6pcs Hex Handle HVAC Tools Air Conditioner Copper Pipe Swaging Tool Round Handle Tube Expander Drill Bit Repairing Set with 1/4, 3/8, 1/2, 5/8, 3/4 Bits

  • Revolutionizing system for molding tubes using heat by friction way more surface of between the flare and the Valv e..
  • When hvac tools air conditioning is installed, expand copper tube, make two copper tube mutual link. (To be installed on hand electric drill.).
  • 7/8", 3/4", 5/8", 1/2", 3/8", 1/4", 6 different sizes per set of your choice to meet your needs.Handle diameter: 7mm (Triangular/Hex Handle).
  • The flares will always have the same size and will fit perfectly.
  • The swages present a perfect depth and a tight fitting, that will make the brazing easier, reducing the fatigue stress over the coupling area..
  • Perfect for installers, no matter if you are just learning or have been doing it..
Check Stock

Dracaena 6 pack G1/4\ thread to 12mm OD hard tubing compression fitting with sealing rings for rigid acrylic tube for pc water cooling system, Black

  • Compatible tubing: solid Acrylic-, Copper-, Brass- or Stainless Steel tube.
Check Stock

1/2\ Od X 2 Ft. Straight Copper Tubing Type K Kh03002

  • Copper Tube Shape Straight, Hard, Application Water, Copper Tube Coating None, Temp. Range 100 Degrees F to 400 Degrees F.
  • Standards ASTM B280, ASTM B306, ASTM B819, ASTM B88.
  • Max. Pressure 1130 psi, Tube Length 2 ft, Copper Tube Type Type K.
  • Tube Size 3/8 in, Inside Dia. 0.375 in, Outside Dia. 1/2 in, Wall Thickness 0.049 in.
Check Stock

Beduan Brass Compression Fitting, Insert Tube Support Compression Sleeve Fitting 1/4\ Tube ID (Pack of 10)

  • ...ade of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubing.....
Check Stock

Hilitchi 8Sizes Tube OD 4mm-16mm Brass Compression Sleeves Ferrules Compression Fitting Kit Metric 220Pcs

  • ...de of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅ [FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅ [HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅ [APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubin....
Check Stock

Hilitchi 3Sizes Tube OD 1/4 5/16 3/8 Brass Compression Sleeves Ferrules Compression Fitting Kit (SAE, 105Pcs)

  • ...ade of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubing.....
Check Stock

MroMax Brass Compression Tube Fitting-6mm /0.24\ ID Male Thread Pipe Adapter for Water Irrigation System 3Pcs

  • 【Product Size】Inner Diameter (I.D.): 6mm / 0.24".
  • 【Material】Brass Compression Tube Fitting is made of brass. Brass for corrosion resistance, ductility at high temperature and low magnetic permeability..
  • 【Feature】Can be used with copper, brass, aluminum and plastic tubing. Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications..
  • 【Note】Only used for irrigation or hydraulic systems, NOT allowed to be installed for potable water..
  • 【Wide Application】Widely used in residential and commercial usage..
Check Stock