Top Corrugated Plastic Drainage Pipes

Flex-Drain ADP53102 Downspout Adaptor, Landscaping Drain Pipe Adapter 3 by 4 by 4-Inch , Black

  • Compatible with most traditional 3-inch and 4-inch corrugated pipe and 4-Inch PVC..
  • Installs faster than traditional corrugated pipes and requires 80% less space for transport and storage..
  • FLEX-Drain's unique flexibility allows it to fit in tight spaces and curvy places..
  • 30-Percent higher load-bearing rating than standard corrugated pipes, Minimum working temperature of -50°F and a maximum working temperature of 150°F.
  • Integrated soil-tight fittings lock securely and are perfect for French drains, downspout drain pipe and more!.
Check Stock

Flex-Drain ADP53102 Downspout Adaptor, Landscaping Drain Pipe Adapter 3 by 4 by 4-Inch 2 Pack

  • Compatible with most traditional 3-inch and 4-inch corrugated pipe and 4-Inch PVC..
  • Installs faster than traditional corrugated pipes and requires 80% less space for transport and storage..
  • FLEX-Drain's unique flexibility allows it to fit in tight spaces and curvy places..
  • 30-Percent higher load-bearing rating than standard corrugated pipes, Minimum working temperature of -50°F and a maximum working temperature of 150°F.
  • Integrated soil-tight fittings lock securely and are perfect for French drains, downspout drain pipe and more!.
Check Stock

NDS 640 Square Grate with Low-Profile Adapter Fits 3 in. & 4 in. Drain Pipes & Fittings, 6 in, Black Plastic

  • ... drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining moderate water flows from lawns, landscaped areas, patios, walkways, and under downspouts.
  • Fits 3 in. & 4 in. Sewer and Drain Pipes & Fittings, 3 in. & 4 in. Single-Wall Corrugated Pipes, 3 in. & 4 in. Triple-Wall Pipes. 44 GPM flow rate. 14.4 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installed—recommended for pedestrians, bicycles, and wheelchair traffic.
  • Place low-profile adapter on top of drain pipe or drain fitting, for a soil-tight fit.
  • place 6 in. drain grate on top of low-profile adapter. 6 in. Square Drain Grates (with Low-Profile Adapters) are available in a variety of colors and materials.
  • Grate top is 5-7/8 in. square with ¼ in. grate openings.
  • Low-profile adapter is 2-1/2 in. high, top opening is 6-3/16 in. square.
  • Comes with one 6 in. Square Grate and Low-Profile Adapter. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects—or we’ll replace it.
  • NDS grates are a proven alternative to traditional concrete drains with UV inhibitors are used to prevent fading and cracking from the sun, ....
Check Stock

Funmit 12Ft Universal Washing Machine Drain Hose Flexible Extension Hose Fit For Most Household Washing Machines

  • ✅【INDUSTRIAL GRADE MANUFACTURING】- Our washer drain hose extension kit features upgraded technology and high-quality materials, including corrugated rubber and heavy-duty polypropylene. This ensures unobstructed draining, while the thick-walled, corrugated design prevents kinking, pinching, blocking, and leaking. With a length of 12 feet, these washing machine hoses easily reach standard drain pipes, floor drains or utility sinks.
  • ✅【WIDE COMPATIBILITY】- Funmit washing machine drain hose comes with an adjustable washer connection head in sizes of 1", 1-1/8", or 1-1/4", making it highly compatible with most washing machine brands. Additionally, our hoses are equipped with steel clips for secure fastening. It is important to tighten the screws on the steel clip as much as possible to prevent water leakage caused by backflow..
  • ✅【HIGH QUALITY MATERIAL】- The washing machine drain hose extension is crafted from high-quality corrugated rubber and durable polypropylene, carefully selected by the manufacturer to meet OEM standards. It ensures stable, efficient, and airtight drainage for your washing machine while reducing the noise of water fl....
Check Stock

Tubing Cutter 1/4 to 2-5/8 Inch Pipe Copper PVC Aluminum Tube with Replaceable Blade

  • Versatile Tools: Designed to cut hard and soft copper, aluminum, brass pipe and PE, PVC plastic tubes. Mainly used for cutting copper pipes in the air conditioner installation and vehicle repair..
  • Adjustable Depth & Precise:Tubing cutter has a cutting capacity from 1/4"-2-5/8"(6-67mm). Adjustable cutting depth designed for fast and safe cutting.Works well and makes precise cut..
  • Spare Blade: Includes 1 spare blade in the handle.
  • Nice workmanship also ensures a life-time durability..
  • Ergonomic and Easy To Use: Easily cuts copper, brass, aluminum, steel and plastic pipes. The corrugated design also make it comfortable, stable to handle and safe in cutting..
  • User Manual: Buy Wostore pipe cutter, you can use it easily with user manual. We have confidence in the quality of our tubing cutter. Any question, please just contact us and we will make things right!.
Check Stock

LSLCQW 5 Pack 25inch drain clog remover, Snake Drain Cleaner Hair Clog Remover tool, Shower drain kitchen sinks and bathtubs, sink snake, hair drain toilets sewer pipe drain cleaning tools.

  • Exquisite packaging and size: 5 25-inch orange drainage pipe blockage removal tools, The sink drain hair cleaner tool is long enough to catch hair and blockages in various Snake Drain sinking pipes..
  • Good flexibility: The material of the drain pipe hair remover is very soft, and the sink blockage remover is made of high-quality polypropylene, which can quickly pick up the hair and dredge the sink. It is flexible to dredge the shower sink. , Can bend a variety of filters and P-trap pipes..
  • Sufficient length and perfect design: Orange 25 inches long enough length, with sharp teeth, flexible drainage pipe clogging removal tool, grab the sink hair, insert the deep pipe, hold the ring, and easily pull out the clogging hair drain ..
  • Easy to use: just hold the handle ring, insert it, pull it up and down and rotate it 2~3 times to remove the blockage. It will not pinch your hands during operation, and can be easily and safely rinsed off..
  • Widely used and environmentally friendly: An excellent drainage tool for kitchen sinks, toilets, washbasins, bathtubs and sewers. Plastic pipe cleaning tools are cheaper than chemical drainage cleaners and can be recycled, which is practical and affordable!.
Check Stock

7 Pack Hair Drain Clog Remover Tool, 20.5in Snake Drain Clog Remover Drain Cleaner Sticks is 35.5in Drain Hair Remover Tool For Sewer Toilet Kitchen Sink Bathroom Tub (1 Stainless Steel and 6 Plastic)

  • [Flexible And Easy To Use] -Plastic drain clog remover is 52cm length, 0.7cm width, 4cm handle’s width. It's long enough to go deep into sink pipes..
  • [Spring Press Design] -The stainless steel cleaner is 90 cm long and 2.3 cm wide. The PP plastic + stainless steel material has good toughness. It has a claw to hold hair and other obstructions tightly..
  • [Package Including] -Drainage cleaning tool, Package including 7 pack drain hair clog remover, 1stainless steel cleaner tool and 6 plastic drain cleaner tools for sink, tube drain cleaning..
  • [Easy Operation] -Drain clog remover tool is used PP material, its softness and hardness are proper.
  • it’s very easy to bend to plug into pipes, like snake moving.This tool is a good helper to clear the sewer..
  • [Widely Used] -Drainage cleaning tools can be widely used in many places, for cleaning bathrooms, kitchens, sinks, bathtubs, sewers and other places that are easily blocked. Multi-tooth drain blockage remover can effectively capture hair, food and other blockages..
Check Stock

Flexible Elbow Corrugated Landscaping Pipe Connector, Connects to 3-in. and 4-in. Pipe

  • Perforated corrugated flexible pipe with removable polyester sock.
  • Connects over 3" corrugated pipe, inside 4" corrugated pipe and 4" PVC pipe.
Check Stock

Flex-Drain 52011 Flexible/Expandable Landscaping Drain Pipe, Solid, 4-Inch by 50-Feet

  • Connects over 3" corrugated pipe, inside 4" corrugated pipe and 4" PVC pipe.
  • Bends around almost anything – no elbows needed.
Check Stock

Cleveland Tubing Perforated Corrugated Expandable Flexible Landscape Drain Pipe with Sock, 4-in. by 25-ft.

  • Connects over 3" corrugated pipe, inside 4" corrugated pipe and 4" PVC pipe.
  • Bends around almost anything – no elbows needed.
Check Stock

10 ft Universal Washing Machine Drain Hose Flexible Dishwasher Drain Hose Extension Kits Corrugated Washer Discharge Hose with 1 Extension Adapter and 2 Hose Clamps, U-Bend Hose Holder

  • Extended drain hose kit: the drain hose kit includes a 10 feet hose, 1 white extension adapter and 2 clamps and u-bend washer drain hose holder, also suitable for most front loading washing machines.
  • Durable and flexible corrugated construction: PP material built in the hose, it will return to the original shape after under pressed, ensure the unobstructed draining, the thick-walled, corrugated design prevents the hose from kinking, pinching, blocking, and leaking.
  • Dimension: the whole drain hose length measures 3 meters/ 10 feet for universal roller machine with inner diameter 30 mm/ 1.2 inch connector.
  • The white adapter has a diameter of 21 mm/ 0.8 inch and is suitable for most water pipes that are directly 20 mm inside, fitted with 18-32 mm clamps for a stronger connection.
  • Movable hook hanger: drainage hanger is clipped on and can be moved anywhere on the hose for wonderful fit, this keeps the hose firmly planted in your drain no leaking and no slipping.
  • When using the hook hanger the hose is firmly gripped and allows precise alignment with the drain to ensure no water splashes.
  • Easy to install: just insert the forming outlet into the end of the hose without any tools.
  • If you are using it for extended hose, simply connect the adapters and co....
Check Stock

Universal Washing Machine Drain Hose Flexible Dishwasher Drain Hose Extension Kits Corrugated Washer Discharge Hose with 1 Extension Adapter and 2 Hose Clamps, U-Bend Hose Holder (6 ft)

  • Extended drain hose kit: the drain hose kit includes a 6 feet hose, 1 white extension adapter and 2 clamps and u-bend washer drain hose holder, also suitable for most front loading washing machines.
  • Durable and flexible corrugated construction: PP material built in the hose, it will return to the original shape after under pressed, ensure the unobstructed draining, the thick-walled, corrugated design prevents the hose from kinking, pinching, blocking, and leaking.
  • Dimension: the whole drain hose length measures 2 meters/ 6 feet for universal roller machine with inner diameter 30 mm/ 1.2 inch connector.
  • The white adapter has a diameter of 21 mm/ 0.8 inch and is suitable for most water pipes that are directly 20 mm inside, fitted with 18-32 mm clamps for a stronger connection.
  • Movable hook hanger: drainage hanger is clipped on and can be moved anywhere on the hose for wonderful fit, this keeps the hose firmly planted in your drain no leaking and no slipping.
  • When using the hook hanger the hose is firmly gripped and allows precise alignment with the drain to ensure no water splashes.
Check Stock