Top Corrugated Roofing

SHDIATOOL 9 Inch Metal Cutting Diamond Blade All Purpose Cut Off Wheel for Rebar Sheet Metal Angle Iron Stainless Steel

• Vacuum Brazed technology makes the industrial premium diamond grains permanently brazed to the edge of steel core,creating an unbreakable and extremely heat resistant segments.
• Both side of core coated with abrasive grains, which provide smooth cutting, and reduce heat generating, it is guaranteed to deliver a better combination of cutting speed and tool life.
• Out diameter 230mm(9"), the incision thickness is approximately 2.6mm, with the arbor of 22.23mm(7/8").
• The core is made with heat-treated hi-speed steel which are guaranteed to withstand the demands of dry and fast cutting, the maximum safe operating speed is 6,790 RPM.
• Designed to cut through the tough materials, including granite, marble, Aluminum, Auto Body Panels, Cast Iron, Copper Pipe, Corrugated Roofing, Drywall, Ductile Iron Pipe, Fire Door, Masonry, Plastic, PVC, Rebar, Reinforced Concrete, Steel Metal, Stucco, Wood.

PORTER-CABLE 15 Degree Coil Roofing Nailer

AMES RESEARCH LABORATORIES MSS1 Maximum Stretch Roof Coating, 1 Gallon, White

• Ames Maximum-Stretch is a white, elastomeric, acrylic, rubberized roof coating & sealant with 650% elongation to resist cracking & peeling. With 88% light reflectivity, the bright white finish reduces surface temperatures resulting in lowered cooling costs..
• Ames Maximum-Stretch adheres to metal roofing, tar, rolled roofs and more. Use as a RV roof sealant, waterproof sealant, rubber roofing material and more. Designed for low-slope roof maintenance..
• 650% elongation – does not flake, chip or peel – elastomeric and rubberized coating and sealant. Rubber roofing material is 88% light reflective resulting in lowered cooling costs. Brush, roll or spray on!.
• Non-toxic, eco-friendly, low VOC & made in the USA.
• 1 Gallon – Our waterproof roof sealant is packaged in 1 gallon Pail. Designed for low-slope roof maintenance on metal roofing, built-up roofing, rolled roofing and more..

#8 x 1/2\ Stainless Philips Pan Head Sheetmetal Screw (1/2\ to 2\ Lengths in Listing) 100 Sheet Metal Screws (#8 x 1/2 Inch)

• Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1".
• #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
• Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
• For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
• Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing.

SHDIATOOL 4-1/2 Inch Metal Cutting Diamond Blade All Purpose Cut Off Wheel for Rebar Sheet Metal Angle Iron Stainless Steel(for 7/8” Arbor)

• Vacuum Brazed technology makes the industrial premium diamond grains permanently brazed to the edge of steel core,creating an unbreakable and extremely heat resistant segments.
• Both side of core coated with abrasive grains, which provide smooth cutting, and reduce heat generating, it is guaranteed to deliver a better combination of cutting speed and tool life.
• Out diameter 115mm(4.5"), the incision thickness is approximately 2.3mm-2.4mm, with the arbor of 22.23mm(7/8"), suitable for most of hand-held grinder or trim saw with 7/8" arbor.
• The core is made with heat-treated hi-speed steel which are guaranteed to withstand the demands of dry and fast cutting, the maximum safe operating speed is 13,300 RPM.
• Designed to cut through the tough materials, including granite, marble, Aluminum, Auto Body Panels, Cast Iron, Copper Pipe, Corrugated Roofing, Drywall, Ductile Iron Pipe, Fire Door, Masonry, Plastic, PVC, Rebar, Reinforced Concrete, Steel Metal, Stucco, Wood.

CREWTOWER Roofing Nail Gun, 15 Degree 3/4-inch to 1-3/4-inch Pneumatic Roofing Nailer, Heavy Duty Coil Roofing Nailer for Asphalt Fiberglass Shingles Lath Wire Fasterening Wooden Box Assembly

• [Professional Nail Gun]: This roofing tool is made not only to get your work done, but also as a loyal servant to your beautiful life and dreams. This roofing nail gun is the right tool to assist you achieve those goals..
• [Easy to Use]: With easy-to-load magazine, this roofing nailer is easy to load coil roofing nails. The quick-release nosepiece makes it easy to clear jams. Simply turning a wheel, you can adjust the nailing depth, and interchangeable trigger to switch firing mode..
• [Powerful and Efficient]: This powerful air nailer is made of industrial-grade parts, firing engine provides quick response. Comfortable rubber handle and well balanced siding nailer gun body reduces fatigue for long time jobs. Large capacity magazine improves working efficency by minimizing replenishment time..
• [Wide Applications]: This heavy duty coil roofing nailer is ideal for fasterning asphalt and fiberglass shingle, fasterning lath wire on plywood, siding installation and wooden box assembly..
• [Tool Specifications]: The pneumatic coil roofing nail gun weighs only 5.67lbs with aluminium body, load capacity 120 nails, drives 15 degree wire welded coil roofing nails, nail length 3/4" to 1-3/4", shank diameter 0.12", air-powered, operating pressure 70-120PSI..

Ames Maximum Stretch - 4.6 Gallon Waterproof Sealant Membrane - Perfect For Roofing, Repairs, Concrete, EPDM & Wood - Liquid Rubber Sealer - Up To 650% Elastic - Made in USA

• Ames Maximum-Stretch is a white, elastomeric, acrylic, rubberized roof coating & sealant with 650% elongation to resist cracking & peeling. With 88% light reflectivity, the bright white finish reduces surface temperatures resulting in lowered cooling costs..
• Ames Maximum-Stretch adheres to metal roofing, tar, rolled roofs and more. Use as a RV roof sealant, waterproof sealant, rubber roofing material and more. Designed for low-slope roof maintenance..
• 650% elongation - does not flake, chip or peel - elastomeric and rubberized coating and sealant. Rubber roofing material is 88% light reflective resulting in lowered cooling costs. Brush, roll or spray on!.
• Non-toxic, eco-friendly, low VOC & made in the USA.
• 4.6 Gallon - Tintable White - Our waterproof roof sealant is packaged in 5 gallon Pail. Designed for low-slope roof maintenance on metal roofing, built-up roofing, rolled roofing and more..

FACHLICH 12\ Metal Cutting Diamond Blade 300MM All Purpose Cut Off Wheel for Rebar Sheet Metal Angle Iron Stainless Steel

• Diameter 12"/300mm,Arbor Hole 25.4mm (1"),for hand-held power cutters, cut-off machines and masonry saws,Thickness 3mm,MAX RPM 5,100.
• Designed to cut through the tough materials, including granite marble, Aluminum, Auto Body Panels,Cast Iron, Copper Pipe, Corrugated Roofing, Dry wall, Ductile Iron Pipe, Fire Door, Masonry, Plastic, PVC, Rebar, Reinforced Concrete, Steel Metal, Stucco and more.
• Utilizing vacuum brazed technology, high concentration of industrial premium diamond particles are permanently brazed to the edge of the steel core creating an unbreakable and extremely heat resistant segments which can fast cut nearly all materials without water cooling,generating fewer sparks and alot less dust.
• Engineered for use one blade for all purpose. Trusted by Fire Fighters, RescueTeams,Police and Demolition Contractors.This diamond blade is used as an emergency rescue and tactical entry tool.
• Save tremendous amounts of down time due to fewer blade changes,can cut with a constant, even cutting depth..
• Good Service: Please contact us if you have any questions about this saw blade.We guarantee the 100% replacement free of charge.

FACHLICH Metal Cutting Diamond Blade,5\ 125MM All Purpose Heavy Duty Cut Off Wheel for Rebar,Steel,Metal,Reinforced Concrete

• Diameter 5"/125mm,Arbor Hole 22.23mm (7/8"),with a 5/8" Adapter Bushingto any hand-held grinder or trim saw,Thickness 2.3-2.5mm.
• Designed to cut through the tough materials, including granite marble, Aluminum, Auto Body Panels,Cast Iron, Copper Pipe, Corrugated Roofing, Dry wall, Ductile Iron Pipe, Fire Door, Masonry, Plastic, PVC, Rebar, Reinforced Concrete, Steel Metal, Stucco and more.
• Utilizing vacuum brazed technology, high concentration of industrial premium diamond particles are permanently brazed to the edge of the steel core creating an unbreakable and extremely heat resistant segments which can fast cut nearly all materials without water cooling,generating fewer sparks and alot less dust.
• Engineered for use one blade for all purpose. Trusted by Fire Fighters, RescueTeams,Police and Demolition Contractors.This diamond blade is used as an emergency rescue and tactical entry tool.
• Save tremendous amounts of down time due to fewer blade changes,can cut with a constant, even cutting depth..
• Good Service: Please contact us if you have any questions about this saw blade.We guarantee the 100% replacement free of charge.

FACHLICH 7\ Metal Cutting Diamond Blade 180mm Cut Off Wheel All Purpose for Rebar Stainless Steel Sheet Metal Angle Iron

• Diameter 7"/180mm,Arbor Hole 22.23mm (7/8"),with a 5/8" Adapter Bushing to any hand-held grinder or trim saw,Thickness 2.6-2.7mm.
• Designed to cut through the tough materials, including granite marble, Aluminum, Auto Body Panels,Cast Iron, Copper Pipe, Corrugated Roofing, Dry wall, Ductile Iron Pipe, Fire Door, Masonry, Plastic, PVC, Rebar, Reinforced Concrete, Steel Metal, Stucco and more.
• Utilizing vacuum brazed technology, high concentration of industrial premium diamond particles are permanently brazed to the edge of the steel core creating an unbreakable and extremely heat resistant segments which can fast cut nearly all materials without water cooling,generating fewer sparks and alot less dust.
• Engineered for use one blade for all purpose. Trusted by Fire Fighters, RescueTeams,Police and Demolition Contractors.This diamond blade is used as an emergency rescue and tactical entry tool.
• Save tremendous amounts of down time due to fewer blade changes,can cut with a constant, even cutting depth..
• Good Service: Please contact us if you have any questions about this saw blade.We guarantee the 100% replacement free of charge.

FACHLICH 14\ Metal Cutting Blade 350mm Diamond Cut Off Wheel All Purpose Heavy Duty for Stainless Steel Rebar Metal Reinforced Concrete

• Diameter 14"/350mm,Arbor Hole 25.4mm (1"),for hand-held power cutters, cut-off machines and masonry saws,with a 20mm Adapter Bushing for Stihl power saws,Thickness 3.2mm,MAX RPM 4,300.
• Designed to cut through the tough materials, including granite marble, Aluminum, Auto Body Panels,Cast Iron, Copper Pipe, Corrugated Roofing, Dry wall, Ductile Iron Pipe, Fire Door, Masonry, Plastic, PVC, Rebar, Reinforced Concrete, Steel Metal, Stucco and more.
• Utilizing vacuum brazed technology, high concentration of industrial premium diamond particles are permanently brazed to the edge of the steel core creating an unbreakable and extremely heat resistant segments which can fast cut nearly all materials without water cooling,generating fewer sparks and alot less dust.
• Engineered for use one blade for all purpose. Trusted by Fire Fighters, RescueTeams,Police and Demolition Contractors.This diamond blade is used as an emergency rescue and tactical entry tool.
• Save tremendous amounts of down time due to fewer blade changes,can cut with a constant, even cutting depth..
• Good Service: Please contact us if you have any questions about this saw blade.We guarantee the 100% replacement free of charge.

#12x1-1/2' Metal to Metal Type #3 Galvanized/ZINC Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

• #12 Metal to Metal #3 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
• 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust resistant.
• Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
• #12 - 3 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
• Coarse Threaded Type 3 Screws generally used in thinner or lighter steel or aluminum products.