Top Corsair Vengeance Cmk16gx4m2b3200c16s

GPIO Status LED Terminal Block Breakout Board for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B

  • GPIO status LED and power 5V / 3.3V indication..
  • GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs green. The position of the LED is in a one-to-one correspondence with the position of the Raspberry Pi 2x20pin connector, and the logic level of the GPIO can be observed very quickly and intuitively. The driving current of each LED is only 0.1mA, so you don't have to worry about it affecting the read and write status of GPIO..
  • Support for Raspberry Pi A+, 3A+, B+, 2B, 3B, 3B+, 4B.
  • Terminal block pitch 3.5mm, wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion pin header, height 8mm..
  • Packing list: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the item not include Raspberry Pi module).
Check Stock

CORSAIR Vengeance RGB RS 128GB (4x32GB) DDR4 3200 (PC4-25600) C16 Desktop Memory

  • Illuminate your system with dynamic RGB lighting from six individually addressable LEDs, encased in a panoramic light pipe that offers unobstructed viewing from virtually every angle..
  • Choose from dozens of preset lighting profiles, or create your own in CORSAIR iCUE software..
  • Optimized for maximum bandwidth and tight response times on the latest Intel and AMD DDR4 motherboards..
  • A custom performance PCB guarantees strong signal quality for superior performance and stability..
  • VENGEANCE RGB RS modules use only tightly screened memory chips for reliably high speeds with the potential for overclocking..
  • Take control with CORSAIR iCUE software and synchronize lighting with other CORSAIR RGB products across the iCUE ecosystem..
  • A solid aluminum heatspreader conducts heat away from your memory for superb cooling even when overclocked, with modern styling to complement your system..
  • Enjoy continuous peace of mind with a limited lifetime warranty..
Check Stock

Corsair Vengeance RGB Pro SL 16GB (2x8GB) DDR4 3200 (PC4-25600) C16 Desktop memory – Black (CMH16GX4M2E3200C16)

  • Illuminate your system with vivid, animated lighting from ten individually addressable, ultra-bright RGB LEDs per module..
  • Choose from dozens of preset lighting profiles, or create your own in CORSAIR iCUE software..
  • Just 44mm tall for wide compatibility with air coolers such as the CORSAIR A500..
  • Optimized for maximum bandwidth and tight response times on the latest Intel and AMD DDR4 motherboards..
  • A custom performance PCB provides the highest signal quality for the greatest level of performance and stability..
  • VENGEANCE RGB PRO SL modules use only tightly screened memory chips, for extended overclocking potential..
  • Take control with CORSAIR iCUE software and synchronize lighting with other CORSAIR RGB products, including coolers, keyboards and fans..
  • A solid aluminum heat-spreader improves thermal conductivity for superb memory cooling even when overclocked, with modern styling to complement your RGB lighting..
  • Supports Intel XMP 2.0 for simple one-setting installation and setup..
Check Stock

Corsair Vengeance RGB Pro SL 32GB (2x16GB) DDR4 3600MHz (PC4-28800) C18 1.35V Desktop Memory - Black (CMH32GX4M2D3600C18)

  • Illuminate your system with vivid, animated lighting from ten individually addressable, ultra-bright RGB LEDs per module..
  • Choose from dozens of preset lighting profiles, or create your own in CORSAIR iCUE software..
  • Just 44mm tall for wide compatibility with air coolers such as the CORSAIR A500..
  • Optimized for maximum bandwidth and tight response times on the latest Intel and AMD DDR4 motherboards..
  • A custom performance PCB provides the highest signal quality for the greatest level of performance and stability..
  • VENGEANCE RGB PRO SL modules use only tightly screened memory chips, for extended overclocking potential..
  • Take control with CORSAIR iCUE software and synchronize lighting with other CORSAIR RGB products, including coolers, keyboards and fans..
  • A solid aluminum heat-spreader improves thermal conductivity for superb memory cooling even when overclocked, with modern styling to complement your RGB lighting..
  • Supports Intel XMP 2.0 for simple one-setting installation and setup..
Check Stock

CORSAIR ONE i200 Compact Gaming PC - Intel® Core™ i7-11700K CPU - NVIDIA® GeForce RTX™ 3080 Graphics - 32GB CORSAIR Vengeance LPX DDR4 Memory - Thunderbolt 3™

  • The CORSAIR ONE is ready to take on today’s games at their highest settings, packing the cutting-edge performance of a fully powered gaming PC into a gorgeous and quiet small-form-factor that takes up less desk space than a laptop..
  • Play in confidence for years thanks to reliable, award-winning CORSAIR components..
  • Speed is king, and an 11th Gen Intel Core processor delivers blisteringly fast frequencies out of the box to give gamers and creators a competitive edge..
  • An NVIDIA GeForce RTX 30 Series GPU with real-time ray tracing technology enables unbelievably lifelike graphics and high frame rates, dwarfing the performance of previous generation graphics cards..
  • CORSAIR VENGEANCE DDR4 high-performance memory provides the speed and capacity to handle the latest applications..
Check Stock

Ankmax USB4 Enclosure for NVMe M.2 SSD, UC4M2 USB4.0 Type-C 40Gbps Interface Compatible with Thunderbolt 4/3 USB4.0/3.1/3.0, Tool-Free Aluminum External Hard Drive Enclosure

  • 【40Gbps High Speed 】With USB4.0 Type-C output interface, it supports the maximum transmission speed up to 40Gbps. The UC4M2's read speeds up to 2505MB/s and write speeds up to 2,454MB/s. (Test Environment: 1TB PCIe4 NVMe SSD 980PRO, Macbook Pro. If the computer's SSD does not support the NVMe protocol, the best speed cannot be achieved) ).
  • 【Multiple Transmission Protocol 】UC4M2 adopts dual-chip master control, equipped with USB4.0 Type-C interface, compatible with Thunderbolt 4/3, USB4.0/3.1/3.0 interface, and supports M1 Pro/Max Mac devices and iPad Pro. Offers the best of both worlds high-speed storage for Thunderbolt and USB devices..
  • 【Only for NVMe M.2 SSD】The UC4M2 SSD Enclosure is specially designed for M Key & B+M Key NVMe SSD up to 8TB capacity. The applicable M.2 SSD size is 2280. A large-capacity external storage expansion device especially suitable for Macbook and other devices..
  • 【Built to be Cool and Durable】Thick aluminum alloy body, unique CNC processing technology, make the product cool and durable, can withstand a drop of up to 2 meters. The all-aluminum body has good heat dissipation performance, which helps to reduce the internal temperature and maintain the best performance of the SSD..
Check Stock

Swift Vengeance

  • Compact Form-Factor: Low clearance ensures wide compatibility with nearly any DDR5 build..
  • Hand-Sorted, Tightly-Screened Memory Chips: Ensure consistent high-frequency performance with aggressive timing options..
  • Solid Aluminum Heatspreader: Conducts heat away from your memory quickly, with refined VENGEANCE styling to fit the look of modern systems..
  • High-Performance PCB: Guarantees signal quality and stability, for superior overclocking ability..
  • Optimized for Intel DDR5 Motherboards: For wide compatibility on the latest motherboards..
Check Stock

CPU Cable for Corsair, 27'' 8 Pin to 8 & 4+4 Pin EPS Cable for Thermaltake, Certusfun Male to Male CPU Power Cable (70cm+15cm)

  • 1. UL1007 18AWG tinned copper core with U-shiped high current terminal & up to 10A, full length 70cm, extension 4+4 Pin CPU Cable length is 15cm..
  • 2. Compatible with CORSAIR Modular PSU: AX1600i(TITANIUM), AX(TITANIUM), ALL AXi(EXCLUDEDS AX1600I), AX(PLATINUM), HXi, HX(PLATINUM), HX(GOLD), RMi, RMX, RM, SF.
  • 3. Compatible with Thermaltake Modular PSU: RGB GOLD, RGB PLATINUM, ARGB GOLD, Toughpower GF1 PF1 TF1.
  • 4. Not compatible with CORSAIR Modular PSU: AX1200, AX GOLD(EXCLUDES AX1200), HX(BRONZE & WHITE), TX-M(GOLD & BRONZE), CS-M, CX-M, VENGEANCE-M(BRONZE & SILVER)..
  • 5. Not compatible with other brands of modular power supplies!.
  • 6. Please insert the PSU single male interface into the Modular PSU, Please insert the (8 or 4+4)Pin EPS interface into the CPU power slot..
  • 7. Support 3-month replacement & Support 2-year warranty..
Check Stock

Double End Thread Plug Gauge 10 PC Go & No Go Class 2B ANSI Taper Lock Design

Check Stock

Black Carbon Fiber Kydex Concealment IWB Holster Right-Hand for Walther P22

  • Fits: WALTHER: P22, PPS M2 | BERETTA: Nano | SCCY SKY | RGR LC9, LC9s | Springfield Hellcat | Kimber R7MAKO.
  • SMITH & WESSON M&P Shield, Shield 2.0, SPRINGFIELD XDs | TAURUS GX4, Curve .380, TH9, Slim, PT 640, Millenium PRO .40, 85 .22, 709, Pro Compact, Micro....
Check Stock

Siemens 6ED1052-1MD08-0BA0 LOGO! 12/24RCE, logic module, disp PS/I/O: 12/24VDC/relay, 8 DI (4AI)/4DO, memory 400 blocks, modular expandable, Ethernet

  • The module can support Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B (of course, Zero and Zero-W can also be supported, but only two screw holes can be fixed)..
  • Support RPi I/O 26 ports 3.3V to 5V bidirectional logic level conversion(input or output). But not include ID_SC and ID_SD ports(since ID_SC and ID_SD are used to identify HAT modules, these two ports are not connected to the 5V interface)..
  • If you short blue terminal block, Raspberry Pi 5V will connect to external 5V. You can use an external 5V to power the Raspberry Pi, of course, you can also power external devices from the Raspberry Pi. Two LEDs are used to indicate the Raspberry Pi 5V and external 5V..
  • Package included: 1x voltage-level shifter module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts..
  • NOTE: the item not include Raspberry Pi module..
Check Stock

HanTof Raspberry Pi Installation Tool 160 Pcs/Lot M2.5 Series Hex Brass Spacer/Standoff + Nuts + Screws Raspberry Pi 3 Model B+(Plus) / 3B / Zero W Accessories Kit

  • ● Popular Size: this spacer & screw & nuts pack is a perfect installation tool for Raspbery Pi 4 Model B, Raspberry Pi 3 Model B+ / 3B / 2B /B+/3A+/A+..
  • ● Material: Durable brass standoffs, stainless steel screws and nuts which strong, anticorrosive, compact and portable..
  • ● Package Include:M2.5*5+5mm--20pcs,M2.5*11+6mm--20pcs,M2.5*20+6mm--20pcs, M2.5*11--20pcs, M2.5 Nut--40pcs, M2.5 screw--40pcs,Total Quantity:160PCS.
  • ● Widely Applications: With the broad spectrum of length, thread, and girth, this collection of screws should be almost universal and cover most hardware DIY projects for desktop computers and some electronics..
  • ● 100% new,Good Quality,Easy to install and durable to use.it's a perfect installation tool for Raspberry Pi..
Check Stock