Top Counterbore Cutter With Pilot

Drill America - DEWPIL1/4X3/16 DEWCBR Series Qualtech High-Speed Steel Pilot for Counterbore, 3/16\ Shank Diameter, 1-3/4\ Length, 1/4\ Size (Pack of 1)

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Available in 1-3/4-inches overall length.
Check Stock

SharCreatives Adjustable Hole Saw Cutter Kit with ABS Dust Shield for Recessed Lights, Ceiling Speakers, Cornhole Boards Cuts Plywood Sheetrock Plaster Fiberglass Plastic, 1-5/8" to 8" (40-200mm)

  • ✔ PREMIUM HOLE CUTTER SET for cutting holes in slate, plywood, sheetrock.,veneer, ceiling tiles and many more. Adjustable cutting size: Twin blade hole cutter applied 1-5/8" to 8" (40 - 200mm) holes with depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides..
  • ✔ PROFESSIONAL HEAVY DUTY WITH IMPRESSIVE DESIGN AND QUALITY - This kit includes one professional grade adjustable hole cutter with two replaceable pilot drill bits (1x auger type Self-Feed pilot bit + 1x HSS pilot bit), two sets of replaceable cutting blades (1 set of high speed steel blades + 1 set of tungsten carbide blades), one ABS dust shield, one adjustment hex wrench, 5 Pcs brad-point wood drill bits and 5 Pcs Masonry drill bits 5/32", 3/16", 1/4", 5/16, 3/8", one 2m tape measure.
  • ✔ COMFORTABLE, CONVENIENT AND EFFECTIVE - Drill bits are effective for drilling that achieves precision and prevents walking. This single hole cutter kit replaces dozens of hole saws for faster, safer, easier cutting of exactly the hole size needed saving you time and money..
  • ✔ WELL ORGANIZED IN THE CARRYING CASE - heavy-duty....
Check Stock

uxcell Knurled Insert Nuts, M8 x 10mm(L) x 10mm(OD) Female Thread Brass Embedment Assortment Kit, 5 Pcs

  • [SIZE] - M8x1.25mm thread size, 0.39" (10mm) long, 0.39" 10mm outer diameter ,OD tolerance: +0.02"/0"..
  • [MATERIAL] - Made of brass, rust resistance, good thermal conductivity and heat resistance, can ensure long time using..
  • [FEATURE] - Can be installed by ultrasonic or heat into thread tapered hole, or in during injection..
  • [ADVANTAGE] - No need to counterbore or countersink the boss hole since the insert has guide pilot..
  • [APPLICATION] - Widely used on injection for fastening..
Check Stock

Patioer Hole Cutter, 1-5/8" to 8" (40-200mm) Adjustable Hole Saw Cutter, with ABS Dust Shield for Recessed Lights, Ceiling Speakers, Vent Holes

  • Adjustable Hole Saw Cutter: This kit includes 1x adjustable hole saw with two replaceable pilot drill bits (1 x auger type self-feed pilot bit +1x HSS pilot bit), 2x high speed cutting blades,1x ABS dust shield, 1x adjustment hex wrench, 5x brad-point wood drill bits and 5x Masonry drill bits, 1x carpenter pencil, 1x 3m tape measure and 1x durable storage case..
  • Size Adjustable: Twin blade hole cutter for cutting 1-5/8" to 8" (40 - 200mm) holes to 8" (40 - 200mm) holes with depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides..
  • Application: It can be used to cut plywood, sheetrock, veneer, cement board, slate, ceiling tiles, etc. A practical tool set for carpenters, home decorators, contractors, professionals and DIY home owners..
  • Easy To Carry: The hole saw cutter comes with a sturdy carry case for easy storage and organize. Easy and convenient to carry. Improve work efficiency..
Check Stock

ARCFONY Plasma Cutter Welder Machine - 50Amp CTS528XP Non-Touch Pilot Arc Plasma Cutter, 3 in 1 200Amp TIG MMA Welders, Dual Voltage 110V/220V

  • Non-Touch Pilot Arc: 50Amp plasma cutter, pilot arc technology allows you to cut without touching the tip of the metal, effectively cutting rough, painted and rusty surfaces, producing minimum slag, maximum cutting thickness of 14mm, ideal cutting thickness of 10mm..
  • TIG & MMA Mode: 200Amp tig welder machine adopts HF arc ignition technology and has the functions of HF TIG, spot TIG and pulse TIG. The welding has little damage to the base metal and can weld thin process parts. 180Amp MMA adjustable arc current, arc welding stability. Suitable for 1.0mm to 4.0mm different acid base electrode welding..
  • Easy To Use: Plasma Cutter machine adopts IGBT inverter technology, 110/220V dual voltage automatic recognition of input current and voltage. Plasma Cutter equipped with NPT 1/4 "air regular, Duty cycle is 60%. Built-in post time, when you stop cutting, the air runs for a minute to cool the consumables of the plasma cutting torch and extending the life of consumables..
  • Safe & Portable: Built-in overload protection and fan cooling system. When the output current and machine temperature exceed the set standard, the p....
Check Stock

Annular Cutter JESTUOUS 3/4 Inch Weldon Shank 1-1/2 Cutting Diameter 2 Cutting Depth with Two-Flat HSS Kit for Magnetic Drill Press,1 Piece

  • 1 inch cutting depth, 8 pc Annular Cutter set.
  • Incudes 2 pcs pilot pins and 6 pcs Annular cutters.
  • Cutter diameter of each cutter: 7/16'', 9/16'', 11/16'', 13/16'', 15/16'', and 1-1/16'.
  • Pilot Pin Size:1/4" x 3" (overall length).
  • Cuts holes in steel accurately, quickly & safely.
  • Large holes can be drilled up to ten times faster than regular drills bits.
  • Make overlapping holes, slotting holes and edge cuts.
  • Machine-finish hole-no reaming needed when used with lubricant.
Check Stock

HHIP 2007-0024 3/8 x 13/32 HSS 3 Flute Solid Pilot Counterbore

  • Continuous pilot counterbores cut rapidly, smoothly and accurately, producing long spiraling chips rather than small metal particles Length 6".
  • Individual counterbores The pilot extends the full Length of the flute portion of the tool.
Check Stock

Trend Snappy 6.35mm x 12.7mm TCT Counterbore - to recess screws for plugging

  • 12/7mm diameter TCT counterbore to drill precision recess to hide screws below the surface when used with matching plug cutter. Ideal for screws up to 12 gauge Imperial sizes..
  • Used in conjunction with the Trend Snappy SNAP/PC/127T or SNAP/PC/12 Plug Cutters, fixings can be hidden with an almost invisible plug for a high quality, professional finish..
  • 6.35mm diameter drill allows for clearance for thicker screw shanks and to ensure accurate, consistent alignment..
  • Drill depth can be altered to suit material thickness and is easily replaceable if it becomes damaged..
  • TCT cutting faces can be resharpened ensuring a long lifespan and assured performance in all timbers and abrasive timber based materials including ply, MDF and chipboard..
Check Stock

Pilot Arc Plasma Cutter 50A Dual Voltage 110/220V Non-Touch Plasma Cutter Cutting Machine Air Inverter DC 1/2 Inch 12mm Clean Cut With Upgrade P80 Cutting Torch Plasma Cutting Equipment

  • Pilot Arc Non-touch Plasma Cutter Machine: The pilot arc cutting machine can effectively cut through rough, painted, and rusted surfaces and produce the least slag. The pilot arc technology allows you to cut without touching the metal. So it provides a better cutting quality and longer life for consumables..
  • Upgrade IGBT Technology: IGBT transistor produces a uniform output to enable cutting of thin metal and can reach high power output for cutting thick metal. At the same time, it can effectively save energy and improve the life of the machine..
  • 50Amp Dual Voltage 110/220V Machine: Output Current [email protected].
  • [email protected] and effective cutting thickness: 1/2 Inch (12mm).
  • Automatic Dual Voltage / Dual Frequency (110/220V 50/60Hz).
  • Dimensions: 15.7" X 10.2" X 13.4" (40*26*34 CM).
  • Wide Application: The plasma cutter CUT50P suitable for cut aluminum, stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials. Designed for both demanding industrial and construction work, or home and hobby use..
Check Stock

Reboot Plasma Cutter IGBT Inverter 40 Amps RBC-4000 AC 110V Air 1/2 Cutting Plasma Cutting High Frequency Duty Cycle for Aluminum Stainless Mild Steel Copper Iron Chrome-Blue

  • Pilot Arc Function,Plasma cutter pilot arc 50Amps with pilot arc function,Very easy to cut Rust/Dust/painted metal. It is made of high quality....
  • Pilot arc Plasma Cutting machine 60% Duty cycle in 50Amps, 100% duty cycle in 40Amps under 240v, 18mm max cutting thickness, 12mm quality cutting....
  • Machine with current display, Also with air post time adjust function, the adjustment range is 2-15 seconds ,this function allow user adjust the time....
  • Accessories come with machine, 4M Pilot arc AG60P cutting torch, Earth clamp with 2.5M cable, 5 pcs tips, 5 pcs electrodes, 2 meters air hose, 4 pcs....
  • Two years warranty for this machine, the buyer can get free service within two years if machine have any problems.
Check Stock

General Tools 5B Standard Circle Cutter, Adjustable 1-Inch to 6-Inches

  • General Tools circle cutters produce precision circles in sheet metal, brass, copper, soft steel, aluminum, plastic, wood and composition materials.
  • The high-speed steel cutting blade adjusts to accommodate the thickness of your material.
  • Features a replaceable cutting blade and a replaceable 1/4 inch pilot drill.
  • This quality cutting machine will make circles from 1 inch to 6 inches in diameter.
  • Maximum safe speed is 500 RPM, for use with a drill press only.
  • This round shank circle cutter is great for making smooth cuts through most materials, including wood, composite, sheet metal and more.
  • All adjustments are made with a hex wrench which is included.
  • Replacement blade is General Tools Model # 4/5 Blade, replacement drill is General Tools Model # 5/6/55 Drill.
  • General Tools circle cutters produce precision cricles in sheet metal, brass, copper, soft steel, aluminum, plastic, wood and composition materials.
  • This quality cutting machine will make circles from 1 ....
Check Stock

IDEAL Electrical 36-311 TKO™ 4 Pcs Hole Cutter Kit – Carbide Hole Cutter Set Smooth Start Pilot Bit Carry Case

  • Superior Performance: TKO carbide tipped hole cutters provide the most precise and clean hole saw and knockout replacement in the industry with....
  • Precise Design: The hole saw cutter has ground carbide teeth made from high quality HSS producing clean, burr-free holes. The carbide cutter includes....
  • Smooth Cutting: The innovative design includes a SmoothStart pilot drill which guides the cutter to the surface, avoiding damage to the cutter and....
  • Convenient Usage: The carbide tipped cutting hole saw has an integrated arbor for solid rotation providing smooth accurate holes without chattering.....
  • Product Specifications: The TKO carbide tipped hole cutter kit is supplied with SmoothStart replacement tip, 7/8 in., 1 1/8 in. and 1 3/8 in. diameter....
Check Stock