Top Countersunk Screws

The Hillman Group The Hillman Group 1263#10 Brass Nickel Plated Countersunk Finishing Washer 30-Pack

  • Material: Made of high-quality 304 stainless steel, not easy to rust, moisture-proof, hard, corrosion-resistant and durable than other simple products..
  • The gasket is very suitable for use in wood and wet environments. Washers are usually used where a larger outer diameter is required to increase the bearing surface and reduce surface load..
  • The shiny washer allows the screw to be recessed in the center, the structure is stable, without burrs, and the edges are rounded after polishing, thus providing a clean and tidy appearance..
  • Finished washers are designed to accommodate the heads of countersunk screws to provide a finished appearance..
  • Package includes: 100PCS No. 8 countersunk washers . The washers are designed for flat or oval head screws..
Check Stock

Belt Buckle Screws Hook Replacement

  • Multi sizes Belt Buckle Screws Hook Replacement for Repair Belts Metal Cross Slot Tip Screws for Belt Buckle Wallet Handbag Assorted screws 66 pack.
  • 2pcs gold tone solid brass screw and 2pcs stainless steel screw in silver for leather belt head fastener ,size is 10x4x7mm.
  • 18pcs Sliding Automatic Buckle edge rivets , 3 colors and 3 sizes and each in 2pcs ..
  • 12pcs Silver Countersunk Flat Head Phillips Screws, 6pcs for each size and size is M2.5mm and M3mm..
  • 12pcs Metal Cross Slot Tip Screws M3X6mm, gold ,silver and black each color have 4pcs..
Check Stock

100#8 Countersunk Finish Washer Black Zinc Plated Brass

  • Material:Made of high quality 304 Stainless Steel,corrosion resistant, sturdy and durable..
  • Shiny washer that allows the screw to recess into the center giving a clean,decorative presentation..
  • Finish washers are designed to accommodate the heads of a countersunk screw in order to provide a finished appearance..
  • Washers are great to have around for use in wood and wet environments.Washers are usually used where larger outside diameters are required to increase the bearing surface and reduce the surface load..
  • Package included:100pcs #8 Countersunk Washers.The washer is designed for flat head or oval head screws..
Check Stock

iexcell 250 Pcs Metric M3 x 6/8/10/12/16 Alloy Steel 10.9 Grade Hex Socket Flat Head Cap Screws Bolts Kit, Black Oxide Finish

  • 10.9 Grade Alloy Steel, Black Oxide Finish.
  • Head Diameter: 5.94mm/0.23",Thread Size(Dia.): 3mm.
  • Total Length(Include Head): 6mm/0.23", 8mm/0.31", 10mm/0.39", 12mm/0.47", 16mm/0.47".
  • Screw Head Style: Flat Head (Known as Countersunk Head).
  • Screw Drive Style: Hex Socket ( Known as Internal Hex ), Hex Size 2 mm.
  • Package: Total 250 Pcs Hex Socket Flat Head Cap Screws, 50Pcs Per Size, Come in an Easy-use Separated Girds Plastic Storage BoxDescription Machine Screws, 10.9 Grade Alloy Steel, Black Oxide Finish.
  • Easy to Store :These Screws Come in an Easy-use Separated Girds Storage Box.
  • ---Item------------Thread Length-------Total Length.
  • M3 x 6--------------4mm-------------------6mm.
  • M3 x 8--------------6mm-------------------8mm.
  • M3 x 10-------------8mm------------------10mm.
  • M3 x 12-------------10mm-----------------12mm.
  • M3 x 16-------------14mm-----------------16mm.
Check Stock

LOVIMAG Neodymium Disc Countersunk Hole Magnets, Strong Permanent Rare Earth Magnets for Tool Room, Science, Craft, Office, 3 Sizes, 30 Pcs

  • 【VERY DURABLE】Neodymium disc countersunk hole magnets are coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth finish which greatly increase the longevity of countersunk magnets. The application of strong magnet with hole are greatly expanded.Tolerances: ±0.2mm(±0.008 inch)..
  • 【EASY TO USE】Round rare earth magnets can directly absorbed on magnetic material and can be fixed on non-magnetic material with screws. Neodymium magnets with holes are sturdy and reliable. When you separate the countersunk hole magnets, be careful and slide gently..
  • 【MAGNETS DIMENSIONS】 Countersunk hole magnets combination are equipped with 3 sizes to meet your various needs. 0.31 x 0.12 inches hole 0.12 inches-10 pcs, 0.47 x 0.12 inches hole 0.16 inches-10 pcs, 0.59 x 0.12 inches hole 0.16 inches-10 pcs. Please note that the main picture is for display only, the actual size is subject to the attached picture.These strong small magnets can be fixed to non-magnetic surfaces with a screw..
  • 【WIDE APPLICATION】Strong neodymium disc magnets with hole can be applied to tool storage, photos display, refrigerator magnets.They can also be used for scientific experiments, locker suction or whiteboard magnet..
Check Stock

LOVIMAG Neodymium Disc Countersunk Hole Magnets, Strong Permanent Rare Earth Magnets for Tool Room, Science, Craft, Office, 3 Sizes, 15 Pcs

  • 【VERY DURABLE】Neodymium disc countersunk hole magnets are coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth finish which greatly increase the longevity of countersunk magnets. The application of strong magnet with hole are greatly expanded. Tolerances: ±0.2mm(±0.008 inch)..
  • 【EASY TO USE】Round rare earth magnets can directly absorbed on magnetic material and can be fixed on non-magnetic material with screws. Neodymium magnets with holes are sturdy and reliable. When you separate the countersunk hole magnets, be careful and slide gently..
  • 【MAGNETS DIMENSIONS】 Countersunk hole magnets combination are equipped with 3 sizes to meet your various needs. 0.31 x 0.12 inches Hole 0.12 inches-5 pcs, 0.47 x 0.12 inches Hole 0.16 inches-5 pcs, 0.59 x 0.12 inches Hole 0.16 inches-5 pcs. Please note that the main picture is for display only, the actual size is subject to the attached picture.These strong small magnets can be fixed to non-magnetic surfaces with a screw..
  • 【WIDE APPLICATION】Strong neodymium disc magnets with hole can be applied to tool storage, photos display, refrigerator magnets.They can also be used for scientific experiments, locker suction or whiteboard magnet..
Check Stock

6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS

  • Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
  • Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
  • Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
  • Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
  • Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..
Check Stock

6 PCS Piano Hinge for Cabinet, 6 Inch Black Stainless Steel Continuous Folding Hinges with Mounting Screws, for Doors, Cabinets, Window

  • Black Piano Hinge: Black piano hinges are made of stainless steel, surface has a matte black coating,rust-proof and durable, Stainless steel piano hinge are more durable than zinc and other steel hinges..
  • Heavy Duty Piano Hinge Design: All holes are designed countersunk heads, easy to operate and screws are easy to fix.
  • each joint of the hinge is a bearing point, providing uniform and smooth pivot action..
  • 6”Piano Hinges with Holes: Have countersunk mounting holes to facilitate mounting to doors or frames, stability than traditional hinges, ideal for doors or boxes, etc, that require extra support..
  • Piano Hinges Package: Package includes 6pcs 6" long black piano cabinet hinges, 6 x 1.2inch/150 x 30mm, Thickness 0.04inch/1mm, with mounting screws..
  • Wide Application Piano Hinge: These piano hinges can provide support for doors or cabinets etc, also can used in woodworking projects, RV projects and other DIY applications such as folding tables or box etc..
Check Stock

POWERTEC 71144 30-Inch Miter Gauge Jig and Fixture Bar for Woodworking

  • INCLUDES: (1) Jig and Fixture Bar with a set of 10-32 nylon adjustment screws (mounting hardware).
  • APPLICATION: A necessary addition to your collection of workshop tools for creating woodworking jigs and fixtures for your router table, band saw or....
  • FUNCTIONAL DESIGN: Features 6 countersunk mounting holes along the top of the bar (plus an additional non-countersunk hole), with 8 tapped holes....
  • VERSATILITY: The top mounting holes are 5” on center, while the side mounting holes are 3-3/4” on center – providing you with a host of mounting....
  • QUALITY BUILD: This miter gauge bar is manufactured with high precision aluminum – delivering a polished profile, excellent fit and long-term....
Check Stock

20pcs M8 x 25mm 304 Stainless Steel Flat Head Torx Bolt Flat Head Cap Bolt Torx Socket Countersunk Screws.

  • Material：The flat head socket cap screws are make stainless steel 304 which offers a high level of chemical and corrosion resistance..
  • Package Included: 20 x Flat Head Socket Cap Screws..
  • Use：With a low-profile, countersunk head, flat socket head cap screws are ideal for applications requiring a strong fastener with a flush mount..
Check Stock

12Pcs Black Shelf Brackets, 5

  • Size: 125 x 75 x 20 mm (L x H x W) / 5 x 3 x 0.78 inch.
  • 【COUNTERSUNK SCREW HOLES】 Screw holes are countersunk design.
  • 【HEAVY DUTY CORNER SHELF BRACE】Durable metal corner brackets are made of high quality cast iron with black coated finish, corrosion and rust resistance.
  • The head of screw is not protruding after the screw has been screwed in, simple and aesthetic appearance.
  • 【5″x3″ RIGHT ANGLE BRACKETS】Package include: 12pcs L brackets, 72pcs screws and 24pcs expansion pipes.
  • 【WIDE APPLICATIONS】 Black 90 degree bracket is perfect for shelving systems, widely used in bookshelf, furniture, table, garden and kitchen shelf.
  • Curved design makes the edge smooth and protect your hand from scratch.
  • 【STRONG BEARING CAPACITY】 Heavy duty corner bracket has 3MM thick, thicker than other corner supports on the marketapply.
  • So the maximum support weight is 35lbs for a pair of L brackets.
Check Stock

Spax M Countersunk Head with Milling Ribs, Partially Threaded T-Star Plus with Cut Point, 4 x 40 MM, Galvanised, 200 Stück

  • Use: For screwing MDF materials and other thin-walled panels made of wood-based materials indoors. Spax-exclusive Wirox surface.
  • Countersunk head with milling ribs pulls particularly easily into the material and can be recessed flush Optimum power transmission and clean fit with Spax bit T-Star plus T20 with guide pins.
  • and longer battery life: no pre-drilling (depending on the wood). Precise positioning and reduction of the splicing effect thanks to the drilling function of the CUT tip. Easier cutting of the wood fibre thanks to Spax-typical wave profile.
  • Made in Germany: TUV certified. Certified for use in the technical approval for screws as a wood connecting medium in carrying wood constructions (ETA-12/0114).
  • Box contents: 1 Spax-M box, 200 pieces MDF screws, T-Star plus countersunk head, 75° milling head, partial thread, CUT tip, Wirox surface, thread diameter (Ød1) = 4 mm x total length (Ls) = 40 mm, partial thread length (LgT) = 28 mm, head diameter (Ødk): 7 mm, bit not included.
Check Stock