Top Coupling For Sucker Rod

Bruder Toys Land Rover Defender Station Wagon

  • Drivers cabin made with transparent high quality polycarbonate and the doors can be opened.
  • Doors, tailgates and hood can be opened, while hood support allows for realistic engine block viewing.
  • Spare wheel on tailgate, removable rear bench seat, chasis has removable drawbar coupling and includes a front (steerable) and rear axle suspension.
  • Additional steering rod allows steering through sliding roof.
Check Stock

Universal Joint Coupling Connector, 12mm/0.47in Inner Dia Steering Shaft U Joint Coupler, Metal Motor Connector Coupler for RC Boat Car

  • Usage: The universal joint coupling is usually used to transfer the axis of rotation.
  • Ideal Accessories: Ideal accessories for remote control model motors, such as model airplanes, boats and robots.
  • Connect Joint: This kind of universal joint or coupling connects a rigid rod whose shafts are inclined to each other.
  • Metal Made Durable: The motor joint is made of high quality metal material, which is durable and has a long service life.
  • Good Quality: The steering joint is 100% brand new and high quality.
Check Stock

Piscifun Fishing Line Winder Spooler Machine, Portable Fishing Spooling Station for Spinning Reel & Baicasting Reel

  • Portable & Durable - Made of composite fiber, lighter weight and durable. Easy to install and you can carry it to everywhere (whether you are in kayaks, boats, etc. ) to spool fishing line by yourself..
  • Two Ways to Spool Your Line - Assembling with the sucker, you can spool on the smooth surface, such as glass, tiled floor, ca surface etc. Assembling with the rod clip, then you can directly spool the reel on your rod to spend less time for winding action..
  • Work With Large & Small Spools - The maximum width of the spools can be up to 5.5in/140mm, the clamping range is 0-5.7in/145mm, please check out the instructions for guidance of adjustment. Adaptable to spinning reel, baitcasting reel and round trolling reel etc..
  • Versatile for Both Thick & Thin Rods - The line spooler clamp can hold the rod blank from 0.2-1.1inch in diameter. Use the CONVEX surface of locking lever if your fishing rod blank is 0.2-0.6in/5-15mm in diameter. Use the CONCAVE surface your rod blank is 0.6-1.1in/15-28mm in diameter..
  • Easiest Way to Spool Fishing Line by Yourself - If you are so tired of spooling the line by hand which from experience it tangles, line slips loose, etc. Piscifun Line Winder keeps the line in the spool to your reel professionally! Note: Fishing reel and ....
Check Stock

U-Joint Shaft 15mm ID Universal Joint Coupling Rotatable Double Section Coupling Joint 15 * 32 * 85mm DIY Steering Joint

  • FIRMLY CROSS SHAFT: The double section Cross shaft coupling is applied to rigid rods whose connecting axes are inclined to each other, usually when the rigid rod with complicated path is not easy to work.
  • THICK UNIVERSAL JOINT: This motor connector consists of a pair of hinges that are close together, these hinges are connected by a horizontal axis, and the other end will also move with the free rotation.
  • SPECIFICATIONS: Material: Metal--Inner Diameter: 15mm / 0.6in--Outer Diameter: 32mm / 1.3in--Length: 85mm / 3.3in--Weight: 344g / 12.1oz (approx.).
  • HIGH HARDNESS COUPLING: Our universal joints are made of high-quality metal, which has high hardness, will not be deformed when transmitting torque, is durable and has a long service life.
  • COMPLETE ACCESSORIES:1 x Universal Joint2 x Screws,Widely used for connecting model cars, model ships, robots, etc.
Check Stock

Monterey LG4300 Sucker Stopper RTU, Ready-To-Use Sprout Growth Regulator, 16 oz

  • STOP SUCKERS - Sucker-Stopper RTU is used for preventing suckers and water sprouts on apples, pears, olives, non-bearing citrus, and woody ornamental plants..
  • REGULATOR FORMULA - The Sucker-Stopper RTU formula is made from the common plant growth regulator napthalaneacetate (NAA) and will stop sucker sprouting from roots and pruning wounds for up to 6 months..
  • READY TO USE - This Sucker-Stopper is formulated to be used from right out the bottle. No further formulation or dilution is required, making this the most convenient plant growth regulator..
  • BETTER FRUIT - Sucker-Stopper RTU assists in the proper pruning of fruit trees. It supports the growth of strong, well-spaced branches for more sun exposure. Your trees will super thrive, resulting in a better food fruit set, size, and color..
  • EASY TO APPLY - Simply mix thoroughly and spray on your tree to control sprouts and sucker growth. This product is widely used in both commercial agriculture and by the home gardener..
Check Stock

5pcs M10 x 1.5 x 50mm Long Rod Coupling Hex Nut Connector Zinc Plated

Check Stock

Smartsails 5PCS M5 X 0.8-Pitch 20mm Length 304 Stainless Steel Metric Hex Coupling Nut

Check Stock

DANCO Add-A-Shower Bathtub to Shower Conversion Kit for Clawfoot Tubs, Polished Chrome, (52406)

  • CLAWOOT TUB TO SHOWER CONVERSION KIT – This shower conversion kit helps turn the traditional clawfoot tub into a bathtub/shower combo.
  • COMPLETE SHOWER CONVERSION KIT INCLUDES - (1) pipe coupling, (1) shower rod holder, (1) set screw, (1) support bracket, (1) flange for support rod, (2) flanges for support tubes, (6) wood screws, (6) plastic anchors, (1) diverter faucet, and (1) showerhead.
  • ceiling supports, shower curtain ring, faucet, and showerhead.
  • CLAWFOOT SHOWER KIT DIMENSIONS - 3-3/8 inch center faucets, 24 inch x 24 inch shower curtain ring, showerhead outer diameter is 1-7/8 inch, with 2.0 GPM maximum water flow rate.
  • METAL LEVER HANDLES with DIVERTER SPOUT - Metal lever handles provide easy control over water temperature with a diverter spout to redirect water flow from the tub to showerhead.
  • RELIABLE PERFORMANCE - Durable brass construction with a polished chrome finish is sure to complement your existing bathroom fixtures by using this wall-mount design tub to shower converter kit.
Check Stock

9 Pcs Ortho Drill Bit Set, AO 1mm,1.5mm,2mm,2.5mm,2.7mm,3mm,3.2mm,3.5mm, 4.5mm

  • Included: (1) 1 mm x 10 cm Drill Bit, AO Coupling (1) 1.5 mm x 14 cm Drill Bit, AO Coupling (1) 2 mm x 10 cm Drill Bit, AO Coupling (1) 2.5 mm x 14 cm Drill Bit, AO Coupling (1) 2.7 mm x 14 cm Drill Bit, AO Coupling (1) 3 mm x 10 cm Drill Bit, AO Coupling (1) 3.2 mm x 10 cm Drill Bit, AO Coupling (1) 3.5 mm x 14 cm Drill Bit, AO Coupling (1) 4.5 mm x 14 cm Drill Bit, AO Coupling.
  • Features: Autoclaveable, German Stainless Steel, 5 Year Warranty, O.R Grade.
Check Stock

Momotata 16 Inch Undercarriage Surface Cleaner Pressure Washer Underbody Car Wash/Water Broom with 2Pcs Straight Extension Wands and 45-Degree Angled Wand 4000PSI (16 Inch Dual- Function- Black)

  • ...able and long-lasting. Working pressure range 1500PSI-4000PSI provides efficient cleaning. It is recommended to choose its working pressure over 2500PSI to get the best cleaning effect..
  • 【Two Working Modes】 -- this Momotata undercarriage cleaner can be used as a chassis cleaning or water broom. Rotate the rotary coupling to the desired angle, then the nut will automatically locked, and the mode is switched successfully..
  • 【1/4" Quick Connection Extension Rod】 -- The 1/4 quick connection function of the extended rod make it easy to install or remove when cleaning . Twp straight rods and a 60-degree bending rod to provide convenient spray washing angles. Finally, the extended rod head is connected to the high-pressure cleaning tool, and the cleaning machine can be easily placed in the bottom of the car to start cleaning..
  • 【Widely Applicable Scenes】 -- You can use the Momotata 2-in-1 dual-function undercarriage cleaner to clean the stains on the bottom of your vehicle, including cars, off-road vehicles, trucks, etc., and it can also be used to clean the fallen leaves and sand or other light trash on the ground of driveways, walkways, courtyards, etc..
  • 【What's included in the package? 】 -- 1x 16-inch chassis cleaning.
Check Stock

American Standard AS738756-0070A Champion 4 Tank to Bowl Gasket, 1 pack, Black

  • BEST-IN-CLASS: The American Standard toilet bowl to toilet tank coupling kit ensures there are no surprise leaks with your toilet.
  • PERFORMANCE: American Standard toilet parts provide durability for bathrooms for years to come. With the Champion 2 coupling kit, expect reliable performance and durability.
  • COMPATIBILITY: Before you install, confirm compatibility by ensuring that your toilet will accept this toilet bowl to toilet tank coupling kit by checking repair part information.
  • FLAWLESS DESIGN: Designed to keep the toilet bowl and toilet tank connected with no leaks, this American Standard coupling kit is easy to install and is durably constructed.
  • INCLUDES: Coupling kit includes the toilet tank gasket, speed connect tank to bowl bolt kit with two 5/16 in. hex nuts, captive washers and speed connect bolts, two grommets, a Fluidmaster coupling nut, washer, and a close coupling washer.
Check Stock

Lil Sucker Always Outdoors Suction Ring

  • Stylish Design: The L’il Sucker Outdoors Rings feature eye-catching outdoor themed prints – perfect for your camping trips and adventures – never spill a sip!.
  • Easy to Use: These beverage/beer holders are easy to use – just slide it onto your drink from the bottom up, hit the lip and take a sip. When you set your drink down, the neoprene ring will keep it firmly attached to any non-porous surface!.
  • Drink Holder: The L’il Sucker beverage holder fits beverage cans, beer/soda bottles, Tervis Tumblers, Yeti ramblers up to 30oz, or any other container with up to a 3″ diameter..
  • Suction Rings: Your ultimate beverage companion! The patented L’il Sucker bottle holder keeps your drink still and secure in a world full of motion..
Check Stock