Top Cpvc Valves

SharkBite 1/4 Inch to 1 Inch Depth Gauge and Pipe Deburring Tool, Copper, PEX, CPVC, PE-RT, HDPE, U702A

• SHARKBITE BRASS PUSH DEPTH GAUGE AND DEBURRING TOOL: SharkBite depth gauge and pipe deburring tool is ideal for deburring the outside of a copper pipe to remove any sharp sections or burrs.
• marks the proper insertion depth for SharkBite plumbing fittings.
• COMPATIBILITY: Deburring tool is compatible with 1/4 to 1-inch-sized PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
• DURABLE: PVC deburring tool is composed of lightweight and durable plastic.
• PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
• MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.

SharkBite 1/2 Inch Ball Valve, Push to Connect Brass Plumbing Fitting, Water Shut Off, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 22222-0000LFA

• INSTALLS IN SECONDS: 1/2 Inch ball water valve requires no special tools, no soldering, no crimping or glue.
• push-to-connect design provides an efficient application that saves time and money.
• VERSATILE: Shark Bite Ball Valve plumbing fittings fit Copper, PEX, CPVC, PE-RT, and HDPE Pipe and connects them in any combination.
• PERFORMANCE: SharkBite shutoff valves are are heavy duty and certified to sustain a pressure of 200 PSI and 200 degrees Fahrenheit.
• QUALITY: Only SharkBite's quality and performance is field-proven.
• PREFERRED BY THE PRO: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.

Cash Acme 3/8 Inch HG145 Thermostatic Mixing Valve with Compression Connections Tee Elbow and Integral Checks Brass Plumbing Fitting 24525

• CASH ACME THERMOSTATIC MIXING VALVE: This Thermostatic Mixing Valve is a point-of-use thermostatic mixing valve designed to assist in the prevention of scalding.
• this valve reduces the outlet flow to a trickle in the event of cold water supply failure.
• COMPATIBILITY: This mixing valve is compatible with SharkBite copper tubing, CTS, CPVC, SDR-9 HDPE, and PEX fittings.
• DURABLE AND HIGH QUALITY: Mixing valves are composed of durable lead-free brass for long-lasting reliability.
• EASY TO INSTALL: The innovative design of this thermostatic mixing valve allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
• remove using a disconnect clip or disconnect tongs.
• SPECS: Outlet temperature range is factory set at 120 degrees F and adjustable anywhere from 85 degrees to 130 degrees F to prevent scalding water temperatures.

Oatey 30751 House Primers, 8 oz, Clear, 8 Fl Oz

• Clear Primer, NSF listed (National Sanitation Foundation).
• Clear aggressive primer used on PVC (polyvinyl chloride) and CPVC (chlorinated polyvinyl chloride) pipe and fittings.
• Low VOC (volatile organic compound) solvent cement.
• A clear aggressive primer for use on PVC and CPVC pipe and fittings.
• Lo-V. O. C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
• Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld.
• Lo-V.O.C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.

SharkBite 1/2, 3/4, 1 Inch PVC Disconnect Clip Set for Push to Connect Brass Plumbing Fittings, PVC IPS (Iron Pipe Size), UIP716A

• ... PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
• MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.

J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 oz.

• J-B Weld Plasticweld: A Hand Mixable Two Part Epoxy Putty Stick That Is Formulated To Repair And Rebuild Various Plastic Compounds And Surfaces. J-B Weld Plasticweld Is Designed For Diy Plastic Repairs On Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And More! Plasticweld Is Certified By The Nsf And Is Safe For Contact With Potable Water.
• Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Plasticweld Takes 25 Minutes To Set And Cures In 3 Hours. J-B Weld Plasticweld Set And Cure Color Is Off White.
• Product Features And Strength: J-B Weld Plasticweld Has Lap Shear Strength Of 600 Psi. Plasticweld Can Withstand Continuous Temperatures Up To 250Of (121Oc) And Intermittent Temperatures Up To 300Of (148Oc) When Fully Cured. Plasticweld Does Not Shrink And Can Be Molded, Shaped, Sanded, Drilled And Cut.
• Applications: Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And Trim, Vinyl Surfaces And Siding, Marine Repairs & Fiberglass Parts, Plastic Water Tanks, And Plumbing.
• Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC.

SharkBite U2016-0000LFA Check Valves, 3/4-Inch

• For use with OD controlled copper, CPVC or PEX pipe.
• No soldering, clamps, unions, or glue required..
• Connects copper, PEX, and CPVC pipe in any combination..
• Designed for vertical and horizontal installation.

Husky 5/8 in. Junior Tube Cutter

• Husky 1-1/4 in. ratcheting PVC cutter cuts up to 1-1/4 in PVC (1-5/8 in. O.D.) for cutting PVC, CPVC, PP, PEX, PE, rubber hose.
• Husky flexible tube cutter cuts PVC, CPVC, PEX pipe and flexible pipe.
• Comes with foldable pouch for storage and transportation.

Stone Pro, Traverfill Pro Adhesive

• Rapidly softens and dissolves the joining surfaces of PVC and CPVC pipe and fittings - an essential first step before application of solvent cement.
• Promotes maximum fusion between pipe and fitting during welding.
• Specially formulated for wet and/or quick-set applications.
• Compatible with all classes and schedules of PVC and CPVC.
• Meets SCAQMD Rule 1168/316A, ASTM F656, NSF/ANSI 14, and NSF/ANSI 61 performance specifications.
• contributes toward satisfying Indoor Environmental Quality credits for LEED v4.

J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe - Dries Tan - 25 ml Pack Of 3

• J-B Weld Plasticweld: A Hand Mixable Two Part Epoxy Putty Stick That Is Formulated To Repair And Rebuild Various Plastic Compounds And Surfaces. J-B Weld Plasticweld Is Designed For Diy Plastic Repairs On Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And More! Plasticweld Is Certified By The Nsf And Is Safe For Contact With Potable Water.
• Cure And Set Time: After Kneading The Two Part Formula Together By Hand, Plasticweld Takes 25 Minutes To Set And Cures In 3 Hours. J-B Weld Plasticweld Set And Cure Color Is Off White.
• Product Features And Strength: J-B Weld Plasticweld Has Lap Shear Strength Of 600 Psi. Plasticweld Can Withstand Continuous Temperatures Up To 250Of (121Oc) And Intermittent Temperatures Up To 300Of (148Oc) When Fully Cured. Plasticweld Does Not Shrink And Can Be Molded, Shaped, Sanded, Drilled And Cut.
• Applications: Abs, Pvc & Cpvc Pipes And Plastics, Auto Bumpers And Trim, Vinyl Surfaces And Siding, Marine Repairs & Fiberglass Parts, Plastic Water Tanks, And Plumbing.
• Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC....

Plumb Pak PP32-10BRLF Straight Tube Transition Union 3/8 X 1/2 in Compression X Cpvc Brass

Disconnect Clip Set for Pipe Fitting - Push Fitting Tool for Slip Removal - Disconnect Clip Removal Tool Set - 1/2", 3/4", 1/4", 3/8" and 1" Slip Fitting Removal Tools (Pack of 5)

• : This push fitting removal tool does not require any additional materials or equipment for the installation process. Achieve a connection devoid of leakages in mere seconds..
• - : This TigerBite plumbing tool can be used for a variety of different pipes. Whether you need to work on copper tubing, PEX fitting or CTS CPVC, this tool will work without any issues..
• : The package of plumbing tools you receive includes a 1” disconnect clip, 1/4” disconnect clip, a ¾” disconnect clip, a 3/8” disconnect clip, as well as a ½” disconnect clip and a push-fit installation tip..
• : With the help of this lead-free TigerBite plumbing tool set, you can re-use fittings and valves and even rotate the fixtures so that you can reassemble them to install them in tighter places..
• : TigerBite fittings are certified up to 93 degrees Celsius and can be used at 200 PSI. They are also certified to ANSI/NSF T61 and ASSE 1061..