Top Cr Steel Plate

Ade Advanced Optics Crusader RD3-009 Red Dot Reflex Sight + Optic Mounting Plate for Taurus PT111 G2, Millennium G2, G2C, G3 with Original Rear Sight, PT140 G2, PT709, PT740, TX22 + Pictinny Plate

  • ...rus G3 with Original Rear sight(see photo).
  • We are listening! Based on customer feedback, we are now sending the new production that has 45 degree edge, it simply slide into the dovetail slot without needing to file the edge like the old product plate that has 90 degree..
  • This plate does NOT fit G3 with NEWER FACTORY STEEL SIGHT, G3C, please search "ADE G3C/GLOCK PLATE" on amazon. Does NOT fit Taurus new TX22C( TX22 Compact) which is Optics Ready, please see ADE RD3-018 SPIKE and RD3-021 NUWA(and NUWA PRO) and RD3-030 Apollo fit directly without any plate/adaptor..
  • 5 MOA. Operates with a single CR2032 battery(installed underneath). Multiple brightness setting. 1000 hours battery life on the brightest setting. Auto turns off after 4 hours. Approximately 1.01"H x 1.9"L x 1.1W.
  • Shock proof，Fog proof and Waterproof for 30 minutes under 4ft water. Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. Full metal construction with glass lens. No plastic body, no plastic lens..
Check Stock

Befenybay 3D Printer Direct Extruder Support Kit Easy Print Flexible Filament for Creality Ender-3, Ender 3 Pro,CR-10,CR-10S

  • 【Material】Plate is made of aluminum alloy sheet material,dual gear extruder is made of aluminum alloy.
  • 【Advantage】A direct drive extruder improves extrusion and retraction.
  • 【Widely Used】Used for Ender 3/Ender 3S/Ender 3 Pro/Ender 3 V2/CR-10/CR-10S 3d printer.
  • 【Filament】More material options,easy to print TPU flexible filament.
  • 【Package Include】1kit direct extruder support plate with 3pcs pulleys, 1pcs length 60cm motor extension cable,2pcs Teflon tubes,1kit metal dual gear extruder,1pcs 40mm height stepper motor.
Check Stock

Kingslayer

  • ...ctory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture.
  • 4 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
Check Stock

Boao 50 Pieces License Plate Screws License Plate Frame Screws License Plate Fasteners for Fastening License Plates, Frames and Covers

  • Four Strong Black Nylon Machine Screws For attaching the REAR license plate. The Screws are Long enough for thick frames..
  • Will Fit if Your Car has threaded M6 License Plate Screw Holes About 3/4" deep..
  • Fits Toyota RAV4, Camry, 4Runner, Corolla, Prius, Highlander, Sienna, Land Cruiser, Avalon, Matrix, MR2, Spyder, FJ Cruiser, Tacoma, Venza, Yaris, Sequoia And More..
  • Fits Lexus SC, RC, LC, HS, CT, GS, ES, NX, UX, LX, GX, RX, IS, And More..
  • Fits Honda Civic (1992-2011), CR-V (2001-2011), Accord (1999-2012), Odyssey (2005-2017), Insight (2001-2012), CR-Z (2010-2016), Fit (2001-2013), Element (2003-2011), Crosstour (2009-2012), And More..
Check Stock

Elite BMX Bicycle 18', 20' & 26' Model Freestyle Bike - 3 Piece Crank (Oil Slick, 20')

  • Please select the correct bike size. 18″ Bike is suitable for 5-7 years-old (3ft 4″ – 4ft 4″). The 20″ is suitable for 11+ year old (4ft to 5ft 10″). The 26″ ( 4ft 2″ to 5ft 10″ /16+ in age).
  • 18″ Specs: FRAME: Hi-tensile steel (” Toptube). FORK: Cr-Mo. HEADSET: 1 1/8″ Integrated sealed. STEM: Alloy (50mm reach). BARS: 4 Piece Cr-MO (8.75″ Rise). CRANKS: 3-Piece Cr-Mo Crank x 170mm. BOTTOM BRACKET: Sealed 48T Spline. PEDALS: Hi-Density Plastic Platform. SPROCKET: 25T. DRIVER: 9TBRAKE LEVER: Tektro Alloy. BRAKES: Tektro Alloy U-brake. TIRES: 18×2.4″.
  • 20″ Specs: FRAME: Hi-tensile steel (20.5″ Toptube). FORK: Cr-Mo. HEADSET: 1 1/8″ Integrated sealed. STEM: Alloy (50mm reach). BARS: 4 Piece Cr-MO (8.75″ Rise). CRANKS: 3-Piece Cr-Mo Crank x 170mm. BOTTOM BRACKET: Sealed 48T Spline. PEDALS: Hi-Density Plastic Platform. SPROCKET: 25T. DRIVER: 9T. BRAKE LEVER: Tektro Alloy. BRAKES: Tektro Alloy U-brake. WEIGHT: 26.2 lbs. TIRES: 20×2.4″.
  • 26″ Outlaw Specs: FRAME: Hi-Ten / Cr-Mo. FORK: Cr-Mo. HEADSET: 1 1/8″ Integrated sealed. STEM: Alloy (50mm reach). BARS: 2 Piece Cr-MO (8.75″ Rise). CRANKS: 3-Piece Cr-Mo Crank x 170mm. BOTTOM BRACKET: Sealed 48T Spline. PEDALS: Hi-Density Plastic Platform. SPROCKET: 25T. DRIVER: 9T. ....
Check Stock

Kingslayer [Blu-ray]

  • ...ctory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture.
  • 4 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
Check Stock

HICTOP CR-10 Glass Bed Double Sided Upgraded Tempered Glass Bed 310x310mm for CR-10 CR-10S CR-10S pro V2 3D Printer

  • HICTOP CR-10s pro glass bed is coated on both sides and both sides can be used. Buying one plate gets you two usable sides, doubling your value.
  • Excellent adhesion when the temperature of the heated bed is about 50℃, you can print directly on the HICTOP glass bed without using any glue or....
  • It is super easy to remove the models when the temperature of the glass goes back to room temperature, you do not need to use removal tools even if....
  • The size of HICTOP glass bed is 310*310mm（12.2*12.2 inch）, it can work with Creality 3D printers such as the CR-10, CR-10S, CR-10S pro, CR-10 V2,....
  • The surface of HICTOP glass bed is smooth without ripples, and there is no residue after the model is removed, it is also more durable than a....
Check Stock

ACEIRMC 3D Printer Glue Stick for Hot Bed Print Filament PLA ABS PET PETG Washable Anti-Tilt Non-Toxic - 15g Pack of 3

  • Specially design for 3D printing hotbed.Bonding does not warp, can be used repeatedly..
  • Easy application, Easy release, Easy clean, Non-toxic, Acid-free, washes off 3D Printer build plate easily with water..
  • With solid form, good viscosity and high density, difficult to penetrate.
  • Solid Glue Stick For Creality Ender 3 3Pro CR-10 10S S4 S5 CR-10 Mini Modelfor 3D Printer.
  • Use it on hot bed before printing, strong adhesion to the hot plate, perfect first layer, It is easier to remove the printing models..
Check Stock

HICTOP Flexible Steel Platform with PEI Surface and Magnetic Bottom Sheet with Adhesive 235x235mm for Ender-3 Pro, Ender-3 V2，Ender-3 3D Printers

  • The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied..
  • The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed..
  • Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃.
  • Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it..
  • The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and similarly sized machines..
Check Stock

Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm

  • No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing..
  • Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model..
  • Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature..
  • Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer..
Check Stock

Official Creality Ender 3 V2 Neo 3D Printer with CR Touch Auto Leveling Kit PC Spring Steel Platform Full-Metal Extruder 95% Pre-Installed 3D Printers with Resume Printing and Model Preview Function

  • 1.Easy Assembly: Compared to Ender-3 V2, this Ender-3 V2 Neo printer is pre-installed, and the assembly requires only 3 steps. Friendly enough to....
  • 2.CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you in the trouble of manual leveling. Easy to use,....
  • 3.Brand New 4.3 Inch UI User Interface: The upgraded UI adds a model preview function, making it easier to observe the printing shape and progress for....
  • 4.PC spring steel magnetic build plate: Different from ender 3, ender 3 pro and ender 3 v2, this new-released FDM 3d printer comes with a removable PC....
  • 5.Silent Motherboard: The mainboard is 4.2.2 version but it is silent mainboard which is different from ender 3 mainboard. This Ender-3 V2 Neo....
Check Stock

ADE Zantitium RD3-015 Red Dot Sight + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS,Non-Aftermarket Slide) Standard, Canik TP9SF and Taurus GX4/G3C/G3 with Factory Steel Sight Pistol

  • ...ctory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands..
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a CR2032 Battery(Included).Promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. Top load S....
Check Stock