Top Crank Torque Test System

PEXMOR Electric Bike Conversion Kit, 48V 1000W 26" Front/Rear Wheel w/Tire Ebike Conversion Kit, Electric Bicycle Hub Motor Kit with LCD Display/Controller/PAS/Brake Lever/Torque Arm (Front)

  • 【STRONG COMPATIBILITY】-It compatible with any 26" bicycle frame with 100mm/3.93" front dropout spacing. It come with all necessary components for installation-including Front Wheel and Tire, Motor Controller, Pedal Assist Crank Sensor, Torque Arm,Controller Bag, Battery bag, Cable ties and Plastic coils, Twist throttle, Pair of Brake Levers, Manual. (Note: Battery not included!!!).
  • 【SAFE & DURABLE】-Brake levers cut power and brakes while riding. Save energy and prevent the motor from overheating.CE certification ensures safety and quality. Comes with a "Torque Arm" to keep the motor wheel running safely and stably.The aluminum alloy frame is durable and stable,it can hold up to 220 lbs..
  • 【EASY TO CONTROL & INSTALL】-The LCD display is convenient to display riding information, such as battery power, speed, PAS level, etc. The twist throttle ensures speed control is fast and simple. Equipped with installation tools and detailed assembly instruction and video, which can help you complete the assembly easily..
Check Stock

Zeda 80 Performance Bicycle Engine Kit with Dio Reed Valve & OKO Carb - Silver - Motorized Bike (36 Tooth)

  • Take your 2-stroke motorized biking to the next level with this complete Dio performance kit including the engine, mounting hardware, and stock exhaust pipe.
  • The included Dio reed valve, OKO carb, K&N style air filter (or optional velocity stack), and modified Dio cylinder round out this performance package that will yield tons of torque and increased speed.
  • For even more power and performance it can also be paired with our Zeda88 performance pipe (select from the drop down above).
  • or pick up a Dio Upgrade Kit for just $99.
  • Kit includes: 2.95 HP 2-stroke engine, modified Dio cylinder with piston, 21mm OKO flat side carburetor, 6 flap Dio reed valve, K&N style mesh air filter.
  • Performance parts: stainless steel allen bolts, enhanced balanced crank, upgraded bearings + 60% thicker crank case around bearings, stuffed crankcase, large intake port (40mm bolt hole width), round exhaust port 40mm crank stroke (more powerful, efficient, and reliable), type B piston (high wrist pin), long rod (89mm).
Check Stock

Stanley Proto J6472 3/8-Inch Drive Electronic Torque Tester, 25-250-Inch Pound

  • Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or where a quick Pass/Fail check is required.
  • Accuracy of +/- 1% of indicated value in both clockwise and counter clockwise directions.
  • Broad accuracy range extends from 10% to 100% of full scale.
  • Three units of measure are available ft-lb, in-lb, and Nm.
  • Three operating modes: Track Mode, Peak Hold and First Peak (for use with Click-style Torque wrenches).
Check Stock

VMS RACING 99-05 Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Mazda Miata MX5 1999-2005 1.8L BP-4W Engines ONLY OEM SIZE (uses same belts)

  • Function: This crank pulley tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt.
  • Feature: Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating while you're removing and setting the final torque specification on the pulley bolt..
  • Design: This 50 mm crank pulley tool socket designed with a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
  • Compatibility: This crankshaft pulley wrench holder tool compatible for Honda (most) and Acura engines..
  • Material: Made of hardened chrome molybdenum steel with great durability to long-lasting service your engine..
Check Stock

TEKTON 1/2 Inch Drive Split Beam Torque Wrench (40-250 ft.-lb.) | TRQ62203

  • Includes 1-pc. 1/2 in. drive torque wrench.
  • Product manual with torque conversion chart.
  • Accurate to +-4% throughout the entire 40-250 ft.-lb. torque range.
  • Each torque wrench is serialized and calibrated according to the ASME B107.300-2010 standard and the detailed test results are recorded on the included certificate.
  • A smooth-turning thumbscrew makes it easy to set a precise torque value, while the teeth inside the flip-up cover lock that torque setting in place during use.
  • Unlike other torque wrench designs, this wrench can be stored at any torque setting without losing accuracy.
  • A scale on the body of the wrench allows for quick conversion from foot-pounds to newton-meters.
Check Stock

TEKTON 3/8 Inch Drive Split Beam Torque Wrench (20-100 ft.-lb.) | TRQ62103

  • Includes 1-pc. 3/8 in. drive torque wrench.
  • Product manual with torque conversion chart.
  • Accurate to +-4% throughout the entire 20-100 ft.-lb. torque range.
  • Each torque wrench is serialized and calibrated according to the ASME B107.300-2010 standard and the detailed test results are recorded on the included certificate.
  • A smooth-turning thumbscrew makes it easy to set a precise torque value, while the teeth inside the flip-up cover lock that torque setting in place during use.
  • Unlike other torque wrench designs, this wrench can be stored at any torque setting without losing accuracy.
  • A scale on the body of the wrench allows for quick conversion from foot-pounds to newton-meters.
Check Stock

DEWALT 12V MAX Cordless Screwdriver, 1/4-Inch Hex Chuck, 1-Inch Bit Tips, Tool Only (DCF610B)

  • Klein Tools 2-in-1 Screwdriver saves time and effort, especially on long-threaded screws used with switch plates and light fixtures.
  • Rapi-Drive Screwdriver has crank action handle that spins screws fast with one hand.
  • Interchangeable bit holder for quick switching between tip styles and features the most popular tip styles: 3/16-Inch (5 mm) slotted and #2 Phillips.
  • Designed for light duty screwdriving. Not intended for high-torque applications.
  • Cushion-Grip handle for greater torque and comfort.
Check Stock

Magene P325CS Crankset with Rechargeable Power Meter for Cycling, Dual Side Crank Based Bike Power Meter Power Sensor

  • ...s, its accuracy rate of +/-1.5% essentially means that any vibrations caused by a bumpy ride, local environmental conditions such as higher or lower level of humidity or temperature barely affect the data collected by Magene P325 CS. .
  • Excellent function: P325 CS provides torque efficiency pedal smoothness, pedal balance alongside with multiple high-order power and cadence data which enable riders to have a better grasp of their cycling data and improve cycling performance at the same time!.
  • Sealed and waterproof: The MAGENE P325 CS comes with increased waterproofing, featuring an IPX7 anti-splash level. The rechargeable design effectively avoids the natural wear of the waterproof rubber caused by battery replacement and improper reinstallation, which in turn causes damage as a result of the water that seeps into the power meter..
  • Long battery life: A high-energy density certified battery and utilized magnetic charging make P325 CS more durable. P325CS achieved a quick 3.5h charging time and a battery life up to 200h which would be more than enough to ensure a complete training block without recharging..
Check Stock

MEEDEN Deluxe Crank Adjusting Easel, Master H-Frame Studio Easel, Heavy Duty Artist Easel,Display Easel,Rosewood Finished, Holds Canvas Art up to 83" High

  • ...with a stunning polished rosewood finish that gives it a beautiful rich red color. It will adorn and enrich the aesthetics of any studio, and take your studio to the next level with the MEEDEN Crank Adjusting Easel..
  • This easel features a super smooth hand crank adjustment system, it makes lifting virtually any weight canvas quick and easy just by turning the crank. The crank adjusts the height of the working area, and also allowing you to control your canvas elevation. The manual crank function also ensures heavier canvas and art pieces are secure and presentable,additionally, it is silent.MEEDEN Deluxe Crank Adjusting Easel, Ornate yet functional..
  • Fully adjustable easel angle goes beyond 90 degrees, just simply customize the angle of a painting by adjusting two large brass wing nuts. When extended to its full height of 98", the easel can accommodate a canvas or panels height up to 83". Heavy-duty H-frame construction and fully adjustable angle makes it perfect for professional or experienced artists working on almost all larger& heavier media..
  • Specially designed front art supply compartment and 2 side stor....
Check Stock

Huanyu HP-20 Digital Torque Meter Tersion Meter Screw driver Wrench Measure Tester Torque Settings Equipment for Torque testing With Calibration Certificate

  • [THREE Units]: The force sensor head is fast and accurate, and the machine can easily switch between kgf. cm: 0.30-20.00, 1bf.in: 0.30-18.00, and N.m: 0.030-2.000. The maximum torque, minimum torque, and average torque can be confirmed..
  • [TWO Modes]: There are optional switches for peak and tracking modes. Equipped with a reset button for easy observation and recording, and the peak hold function ensures stable work..
  • [Safety & Stability]: Automatic charging control, and two hexagonal foot fixing screws are provided to ensure the stability of the desktop..
  • [Unique body]: LCD high-definition display, metal body, sturdy mounting fixture knob, making the machine more durable and easy to operate..
  • [Use]: Mainly used to measure and test the torque of various electric screwdrivers, pneumatic screwdrivers, torque screwdrivers and torque wrenches.
  • to correct the torque of electric screwdrivers, pneumatic screwdrivers, torque screwdrivers and torque wrenches, and torque caps to meet the needs.
  • It can measure the torque of other tools, such as various fixing devices..
Check Stock

Large Torque 1 inch Pneumatic Impact Wrench - Heavy Duty Torque Output, High Precision, Accessibility, Control

  • 1. [Two units]: The force sensor head is fast and accurate, and the machine can easily switch between kgf.cm: 5.0-250.0 and N.m: 0.50-25.00..
  • 2. [Three Modes]: There are three optional switches for peak, tracking, and F.PEAK modes. Equipped with a reset button for easy observation and recording, and the peak hold function ensures stable work..
  • 3.[Safety and stability]: Automatic charging control, and two hexagonal foot fixing screws are provided to ensure the stability of the desktop..
  • 4.[Unique body]: LCD high-definition display, metal body, high-quality mechanical buttons, making the machine more durable and easy to operate..
  • 5.[Use]: Mainly used to measure and test the torque of various electric screwdrivers, pneumatic screwdrivers, torque screwdrivers and torque wrenches.
  • to correct the torque of electric screwdrivers, pneumatic screwdrivers, torque screwdrivers and torque wrenches, and torque caps to meet the needs.
  • It can measure the torque of other tools, such as various fixing devices..
Check Stock

9' Outdoor Aluminum Patio Umbrella, Sunbrella Fabric Patio Umbrella with Auto Tilt and Crank, Royal Blue

  • Sunbrella fabrics - the leader in performance fabrics for over 50 years, offer significant sun protection. The Skin Cancer Foundation recommends Sunbrella as an aid in the prevention of sun-induced damage to the skin..
  • Operation - Operates with crank open system for your easy and quick use. Raise, lower, and adjust your canopy easy with the integrated hand-crank lift.
  • Tilt - The auto tilting feature is operated by the cranking system. To tilt the umbrella, simply crank the umbrella all the way up until it is fully tensioned... then continue cranking until the umbrella tilts by itself. To stand the canopy upright, turn the crank in the opposite direction..
  • Stable - 8 ribs for extra strength and Brown powder coated 1.5" dia. aluminum pole that resists wind better. Vented Canopy is Designed to Facilitate Air Flow, Keeping it from Blowing Away in Windy Climates..
  • NOTE: Due to monitor variations,colors may appear slightly different. Base not included.
Check Stock