Top Crankshaft Holding Tool

ACDelco Gold 710506 Crankshaft Front Oil Seal

  • Removal and installation tool for front crankshaft seal and wear sleeve on Cummins Signature, ISX & QSX，ISX12 and ISX15 engine.
  • Crankshaft rear seal remover and installer replace for OEM# 4918991 tool.
  • Fit for the newest Cummins seal and sleeve perfectly.
  • Remove and install front crankshaft seal easily and without damage.
  • Made of high quality steel and black finish.
Check Stock

19 mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder for Honda and Acura Engines

  • 【50MM Crankshaft Pulley Removal Tool 】-- Used to maintain the harmonic damper pulley position while removing/installing the pulley bolt on many....
  • Using 50MM Crankshaft Pulley Removal Tool -- Use with square socket driver. >1/2" square drive use with breaker bar. Hole in center of tool - allows....
  • 【19 MM Harmonic Balancer Socket 】--The hex socket is used with an impact wrench to loosen the crankshaft bolt It can be used on Honda engines that....
  • Using 19MM Harmonic Balancer Socket -- Use with 1/2" drive.Designed with more than three times the standard socket mass to direct more energy to....
  • Satisfaction Guarantee: If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days, guarantee with 12 months’....
Check Stock

ABN Long Reach Harmonic Balancer Installer Kit – 5 Piece Harmonic Balancer Pulley Puller Set Damper Puller Kit

  • PROTECT YOUR CRANKSHAFT FROM FAILURE: The ABN Long Reach Harmonic Balancer Installation Tool Pulley Set allows you to quickly and easily install replacement harmonic dampers into your vehicle.
  • A harmonic balancer protects your vehicle from damaging vibrations that can wear down the life of your crankshaft and protects your crankshaft threads from stripping, making it important to install the harmonic balancer with precision and accuracy.
  • FITS YOUR VEHICLE: Designed for use on many late Ford, GM, Dodge, and Chrysler vehicles with V8 and V6 engines.
  • Long reach thread sizes include M14x1.5, M12x1.75, M12x1.5, M16x2.0.
  • EASY TO USE: Attach the pressure bearing screw nut onto the chosen jack screw.
  • After guiding the replacement harmonic balancer onto crankshaft pin, thread the jack screw into the crankshaft and hand tighten the pressure bearing to the harmonic balancer.
  • Continue tightening system into place with hand wrench (not included) and remove installer assembly.
  • CONTENTS: Long reach harmonic puller tool includes a pressure bearing and screw nut assembly tool and 4 jack screws to fit a variety of vehicle sizes.
  • Constructed of heavy-duty metal materials for durability and longevity with a black oxide finish for resistance to....
Check Stock

For Power stroke 6.7L Front and Rear Crankshaft Seal Installer Remover Master Set Fit for 2011-2021 Ford Super Duty Diesel F-250 F350 F-450 F-550 F-650 F-750 Alt to 303-1509 303-1514 303-1513 303-1510

  • Function -- This is a master tool set that can remove and install all the front and rear crankshaft seals. This professional tool set will absolutely save your time and energy to do the work. They are same or exceed the OEM function and quality..
  • Fitment -- Fits for 2011-2021 Ford Super Duty F-250 F-350 F-450 F550 equipped for Power Stroke Diesel 6.7L and 2016-2021 Ford Super Duty F-650 F-750 equipped for Power Stroke Diesel 6.7L..
  • Include -- 1 * 303-1509 & 303-1509-01 6.7L Front Crankshaft Seal Installer Tool Alt ST-137B. 1 * 303-1510 6.7L Front Crankshaft Seal Remover Alt ST-152. 1 * 303-1514 6.7L Rear Crankshaft Seal Installer Alt ST-138. 1 * 303-1513 6.7L Rear Crankshaft Seal Remover Alt ST-148..
  • Material -- Made of premium heavy-duty hard steel with black coated for rust and corrosion resistance, hardened construction for high strength and impact resistance, this tool is top quality and durability that can serve for a much longer time..
  • Satisfaction Guarantee -- Yoursme aims to provide excellent products and best service for customers. You can simply return it if you are not satisfied with the product. We support 30 days full refund for return and 12 month warranty..
Check Stock

Crankshaft Rear Main Seal and Wear Ring Installer Tool Replacement for Engine 4.5L 6.0L 6.4L Diesel Alt 303-770

  • Replacement for 4.5L Diesel - Low Cab Forward (2006-2009).
  • 6.0L Diesel - F650/750 Super Duty (2005-2007).
  • 6.4L Diesel - F250/350/450/550 Super Duty (2004-2010 & VT365 International).Installation instructions are not included.
  • OEM Replacement part # 303-770. ZTSE4515C ZTSE4515. Universal, used to install the Crankshaft Rear Seal Wear Ring for 4.5L, 6.0L, 6.4L Powerstroke and work in an easier way to save your time and money.
  • Material: All components made of high quality carbon steel, impact resiatant, excellent solid and durable.
  • Universal fits for installation of Crankshaft Rear Seal Wear Ring for 4.5L,6.0L,6.4L Powerstroke .This tool is needed to prevent your seal from leaking.Designed to eliminate lip flare on the wear sleeve and install the crankshaft rear seal wear ring on 4.5L, 6.0L & 6.4L powerstroke engine properly.
  • This rear main seal installer tool can help you install the crankshaft wear ring, rear seal and rear seal carrier effortlessly. The wear ring is automatically installed to the proper depth.
Check Stock

JoyTube Turbo Engine Timing Tool Kit for Chevy Vauxhall Opel Cruze 1.0 1.2 1.4, Camshaft Holding Locking Tool en-49977-100 en955 km955

  • 【Material】Turbo Engine Timing Tool Kit is constructed with aluminum and high quality steel for superior quality and durability..
  • 【Application】This Engine Timing Tool Kit is compatible with Vauxhall / Opel : Adam 1.2 1.4 (2012- ), Ampera 1.4 (2011- ), Astra-J 1.4 (2009), Corsa-D 1.0 1.2 1.4 (2009-),Cascada 1.4 (2013-), Insignia 1.4 (2011-), Meriva-B 1.4 (2010-), Mokka 1.4 (2012-), Zafira-C Tourer 1.4 (2011-),Buick Encore1.4.
  • 【Function】Designed to lock the cam and crank shafts in position to allow the removal and replacement of the timing chain fitted to the Vauxhall/Opel twin Cam engines..
  • 【To Ensure&Remove】Ensure the chain tensioner is fully retracted and held in the retracted position using a suitable pin. Remove the crankshaft pulley using an appropriate pulley holding tool..
  • 【Storage】Comes with a case, easy to use and store the tools..
Check Stock

Performance Tool W80510 Flywheel Turner with Spring Tension and Hands-Free Work for Engine Maintenance and Repair of Vehicles

  • For turning and holding flex plates and flywheels.
  • Easily turn engine from underneath the vehicle.
  • Spring tension holds tool onto flywheel, allowing free use of both hands.
  • Great for working on clutches, transmissions, installing rings or other jobs that require the crankshaft to be in a certain position.
  • FEATURES: Easy-to-adjust torque collar holds desired setting when released.
  • Permanently lubricated internal mechanism, never needs oil.
Check Stock

TIGERSGATE Cam Crank Shaft Locking Tool For harley 2017-UP MILWAUKEE 8(M8) Engine

  • Fitment：Fit for Harley All 2007-2016 Twin Cam Models, 2017-UP MILWAUKEE 8(M8) Engine Models, 2006 Dyna Models..
  • Function: The tool is designed to lock the camshaft and crankshaft gears which allows for removal or replacement of the camshaft and crankshaft bolts..
  • Premium Material：Made of high-strength urethane elastomer to ensure that the tool will not damage your transmission and will not deform.
  • Put it lightly between the gears can lock the gear tightly and ready to next step，backyard mechanic can make it easily.
  • Package Included： 1x M8 twin cam Locking Tool.
Check Stock

E-cowlboy Crankshaft Positioning Tool for Ford 1993-newer 4.2L 4.6L 5.4L 6.8L Engines Crankshaft Holding Tool Timing Chain Installation Replace for Rotunda 303-448, T93P-6303-A, 6024 & 525219

  • ...4.6L 2 valve and 4.6L 4-valve V8, 5.4L V8, and 6.8L V10 engines. Replace for Rotunda 303-448, T93P-6303-A, 6024 & 525219. Each part is manufactured to OEM specifications and testing..
  • Perfect Design — These engines are not Free Wheel engines, please Do Not rotate the crankshaft and/or camshaft when removing the timing chain and installing the cylinder heads. If it has "Jumped Timing", it will cause damage to the Valves and/or Pistons, requiring removal of the cylinder heads..
  • Easier Work — Must have tool for timing chain installation and adjustment! Easily install this tool over crankshaft and engine front cover alignment dowel. Align the crankshaft Woodruff key with the keyway on tool. It will position the crankshaft at top-dead-center (TDC) to correct the timing chain installation..
  • Superior Quality — Premium grade CNC machined heavy duty solid steel with black powder coated, strength and durability, anti-corrosion and anti-rust, anti-impact and anti-deformation. High precision and hardness to provide a much longer service life..
Check Stock

EWK 50mm Crankshaft Pulley Wrench Holder Tool Crank Removal Holding Spanner kit for Honda and Acura Engines

  • 【 Specialty Tool 】 EWK professional grade Acura and Honda crank pulley tool.
  • holds the harmonic damper pulley in place and keep it from rotating....
  • 【 Wide Applications 】 Works with a 1/2 inch breaker bar or ratchet, this crankshaft pulley holder fits the hex shape of harmonic balancer on many....
  • 【 Great Compatibility 】 Small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing....
  • 【 Tough and Sturdy 】 Highly recommended by professional mechanics! Constructed with hardened Chrome-Molybdenum steel alloy, extremely durable and....
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If....
Check Stock

XtremeAmazing Valve Spring Compressor, Crankshaft Positioning Tool, Cam Phaser Holding Tool, Timing Chain Locking Wedge Tool with Lockout and Pulley Bolt Repair Kit for Ford 4.6L 5.4L 6.8L 3V Engines

  • 1PcValve Spring Compressor tool: Same as OTC 6684, Rotunda 303-1039,Fit Explorer/Mountaineer/Sport Trac.
  • 1Pc Crankshaft Positioning tool: Similar to Rotunda 303-448, T93P-6303-A, 6024 & 525219.Fit Ford 1993 newer 4.2L and 4.6L 2-valve engines, 1993 newer 4.6L 4-valve engines, and 1993 newer 5.4L and 6.8L V8 engines.
  • 1Pc Cam Phaser Holding/Locking Tool: Similar to Ford 303-1046, OTC 567614. Fit Ford Rotunda 5.4L 4.6L 3V.
  • 1Pc Timing Chain Locking Tool: Similar to OTC 567617. Fit 2005 – 2012 5.4L 3V Expedition, Navigator.
  • 2006 – 2010 4.6L3V Explorer, Mountaineer.
  • 2006 – 2014 6.8L F-53 Motorhome Chassis.
  • 2011 – 2012 6.8L 3V F-59 Commercial Stripped Chassis.
  • 2005 – 2009 5.4L 3V F-Super Duty 250-550.
  • 2005 – 2009 6.8L 3V F-Super Duty 250-550.
  • 2Pcs Cam Phaser Lock Out Kit : Eliminate the noise and prevent it from reoccurring in the future when the worn phasers shift back and forth, triggering a valve timing adjustment as they move.
Check Stock

A-Team Performance - Harmonic Balancer Install Tool Crank Pulley Installer Crankshaft Installation 551141 Billet - Compatible with GM 1997-Up LS1 LS Engines

  • Harmonic Balancer Install Tool Crank Pulley Installer Crankshaft Installation 551141 Billet.
  • Compatible with GM 1997-Up LS1 LS Engines.
  • Superior Quality: Made of hardened structural 10.9 steel, it is excellent solid and durable with great rust and corrosion resistance to long-lasting service your balancer..
  • Wide Compatibility: This LS Harmonic balancer is perfect for your Camaro, Corvette, Trans Am, GTO, G8, LS Truck, or LS powered street rod..
  • Installation: Simply thread the tool into the crankshaft until it seats, then tighten the nut down until the pulley is seated. This is a must have for engine swaps or upgrading the balancer..
Check Stock