Top Crankshaft Series

Sealed Power 6-4830A Connecting Rod Bearing Set

  • Greater seizure resistance than tri-metal material.
  • Dramatically reduces or eliminates bearing wear.
  • Made with silicon to provide greater surface hardness.
  • Silicon particles help polish crankshaft journal to further reduce wear during operation.
  • Utilizes ISO & QS certified manufacturing.
Check Stock

Maryland International Part 1

  • Cool Coil Technology, Heavy Duty "FatBoy Series" Upgrade.
  • Replaceable Pulley Bearing, Super Smooth "Xtreme Precision" Machined Pulley.
  • Upgraded to 4 Layer "Xtreme TOUGH" Integrated, Water Tight Wire Harness - with Xtreme's "Integrated Diode".
  • Specs: Description: PTO Clutch, 1.125" Crankshaft, 6.3" Pulley, Counter Clockwise, A/B Belt, 200 ft. lbs. torque.
  • Replaces OEM Numbers: Bad Boy: 070-1000-00, Stens: 255-775.
Check Stock

Standard Motor Products PC308T Crankshaft Position Sensor

  • Standard Motor PC308T T-Series Crankshaft Position Sensor PC308T.
  • Package Dimensions: 4.5 L x 10.9 H x 10.3 W centimeters.
Check Stock

Front Cover Crankshaft Seal Installer Installation Tools Campatible with 1989-Current Cummins 3.9L 5.9L 6.7L Replaces 3824498 1338

  • Wide Application – Compatible with 1989-2020 Cummins 3.9L 5.9L 6.7L, especially suitable for 1989-2016 Cummins 4BT 3.9L, B Series 5.9L, ISB 5.9L 6.7L and QSB 5.9L 6.7L..
  • Replacement – OE# 3824498 1338, with seal numbers 3937111 and 3904353 or the seals in kit 3802820 installed..
  • High-Quality Materials – Made of top-quality wear-resistance steel, durable and anti-corrosion, repeatedly tested and optimized to ensure its excellent performance and a long service life..
  • Function - This kit is specially used to correctly place the crankshaft sealing ring during the installation process, avoid any leakage due to uneven placement and make the work proceed in a correct and orderly manner..
  • Package Include - 1*Front Cover Crankshaft Seal Installation Tool. -----Any other problem about the product, please feel free to contact us. If you are not satisified with the item, please feel free to return it back and we will refund full back to you. If the item has defect, please contact us, we take all the responsibility and reissue it for free without hesitation..
Check Stock

INEEDUP 13401-28030 Automotive Engine Crankshaft Fit for for Toyota 2AZ 2.4L Camary Scion Highlander Solara Rav4 Crankshaft

  • FITMENT - Fit for CRANKSHAFT for TOYOTA 2AZ-FE.Engine Code:2AZ-FE 16V DOHC 2.4 LTR VVT-i PETROL.Compatible Models:For TOYOTA PREVIA, For CAMRY, For ALPHARD, For SOLARA, For RAV4, For IPSUM, For AVENSIS, For ESTIMA & For SCION 2001-08..
  • FEATURES - Common faults in crankshaft include journal wear, cracks, ablation, bending, twisting, and fracture etc. Our high quality crankshaft can convert the linear motion of a piston in rotary motion effectively to improve engine performance noticeably. This crankshaft is a good choice to solve these issues for you..
  • INSTALL READY - Complete new crankshaft, perfect fit and no modification is needed. Ready to install for your vehicle..
  • REMINDING - Kindly please refer to the fitment below to make sure the Brand Type and Year can fit your model..
Check Stock

Cam Phaser Locking Tool and Crankshaft Positioning Tool Crankshaft Wrench Holder Fit for Ford 1993 4.2L/4.6L 2-valve,4.6L 4-valve 5.4L/6.8L V8 Similar to Rotunda 303-448,T93P-6303-A,6024&525219

  • FITMENT(Crankshaft Positioning Tool):1993 and newer 4.2L/4.6L 2-valve engines,4.6L 4-valve and 5.4L and 6.8L V-8 engines..
  • FITMENT(Cam Phaser Locking Tool):Expedition 5.4L 3V 2005-2011.
  • F-250/350/450/550 5.4L 3V 2005-2009.Mark LT 5.4L 3V 2006-2008.
  • Mountaineer 4.6L 3V 2006-2010.Mustang 4.6L 3V 2005-2010.
  • Navigator 5.4L 3V 2005-2012.Similar to Rotunda 303-448,6024,525219..
  • MATERIAL And DESIGN(Cam Phaser Locking Tool):Hardened chrome molybdenum steel,resistance on rust,deformation and crack.Designed with a triangle shape with four holes to perfectly fits for your cam phaser.It is a quite available accessory to make you do the phaser job with ease..
  • USAGE(Crankshaft Positioning Tool):This tool slides easily over the crankshaft and seamlessly locks into place with the Wood ruff key.You only need to rotate the crankshaft with tool attached to crank so that the slot in the handle locks into the engine cover alignment dowel pin,ensuring the engine is at the correct TDC point avoiding extreme damage and costly repairs..
  • CORRECT INSTALLATION POSITION(Crankshaft Positioning Tool):Easily installs over the crankshaft and engine front cover alignment dowel to position the crankshaft at top-dead-center..
Check Stock

40 Series Go Kart Torque Converter Kit,COMPLETE-Bolt On Back Plate,40 Driver and Driven Pulleys,Belt,Cover,Hardware,Fits 8-18hp Motors 1 Shaft,TC40-100 10t-12t Sprockets-Replaces 203015,203015A

  • 40 Series Torque Converter Kit - Easy to install bolt on go kart torque converter kit that fits nearly all 8HP - 18HP engines..
  • NO JACKSHAFT REQUIRED - Includes Bullet Lines' bolt on 40 series back plate with an integrated jackshaft..
  • COMPLETE KIT - This is a complete 40 series torque converter kit that includes: Easy Bolt On Back Plate, 40 Series 1" Driver Pulley, 40 Series 5/8"....
  • FITS GO KARTS - 8HP - 18HP Motors with a 1" Straight Crankshaft, and 1/4" Keyway. Replaces OEM Part Numbers 203015, 203015A.
  • INSTALL - Bolt-on 40 series back plate with integrated jackshaft will save you time and money. DRIVER PULLEY CAN BE INSTALLED BACKWARDS TO LINE UP....
Check Stock

Deck Engagement Clutch Cable for Craftsman Sears POULAN Husqvarna 532435111 532408714 532197257 AYP 435111 408714 197257

  • Stainless steel brake rivets for a long and safe service life.
  • SPEC: 1.00" Crankshaft, 5-5/8" Offset Pulley, Counter Clockwise, 5/8" Belt, 125 ft.lbs torque.
Check Stock

2009-2018 Subaru WRX STi Nitride Treated Hardened Crankshaft EJ257 2.5L 12200AA430 OEM GENUINE

  • 【Compatible】The crankshaft rear main seal & wear sleeve installer & remover tool kit compatible with Cummins ISX QSX ISX15 ISX12 diesel engines. Replaces OEM 3164780 3162994. Replace multiple seals including 4965569..
  • 【Features】Designed for easy removal and correct installation of the crankshaft rear seal and wear ring/sleeve on diesel engines..
  • 【Advantage】This crankshaft rear main seal & wear sleeve installer & remover tool kit helps reduce the risk of damage to the crankshaft seal surface during disassembly. In addition, the rear seal and wear ring will be automatically installed to the appropriate depth using this special tool 3164780 to prevent damage to the rear seal and leakage..
  • 【Quality】The crankshaft rear main seal & wear sleeve installer & remover tool kit is manufactured by an ISO-certified manufacturer, made of high-quality materials, and meets or exceeds OEM requirements. 100% factory tested, and durable..
  • 【Warranty】2 years warranty for the The upper gimbal steering arm shaft kit! When you have any questions about our products, please feel free to contact us, we will provide the best service..
Check Stock

Engine Crankshaft - 4-Stroke Engine Crankshaft 110cc for ATVs Dirt Bikes Pocket Bikes Scooter Accessory Simple installation

  • Fits GM LS1, LS2, LS3, LS6, LS7, L92 To: Pre-1997 TH350, TH400, 700-R4, 4L60, 4L60E, 4L85E.
  • Package Includes: 1 x LS Crankshaft Spacer, 6 x Crankshaft Spacer Bolts..
  • Note : 1. WILL NOT FIT 4L80E transmission or 1999-2000 6.0 liter engine with long snout crankshaft.
  • 2. Required when used with automatic transmission built before 1997, Ensures Proper Clearance Between Crankshaft and Converte.
  • 1 Year Unlimited-mileage Quality Guarantee.
Check Stock

Go Kart Cart Torque Converter Kit 40 Series Clutch Pulley Driver Driven 8-18 HP

  • 40 Series Clutch Pulley Driver Driven 8-18 HP.
  • Fits all 8HP - 18HP engines with a 1" straight crankshaft with 1/4" keyway.
  • Includes: Driver Clutch, Driven Clutch, Belt, Jackshaft.
  • Includes: All mounting hardware attached to an easy to mount backing plate.
Check Stock

ACDelco Gold 710506 Crankshaft Front Oil Seal

  • Removal and installation tool for front crankshaft seal and wear sleeve on Cummins Signature, ISX & QSX,ISX12 and ISX15 engine.
  • Crankshaft rear seal remover and installer replace for OEM# 4918991 tool.
  • Fit for the newest Cummins seal and sleeve perfectly.
  • Remove and install front crankshaft seal easily and without damage.
  • Made of high quality steel and black finish.
Check Stock