Top Creates Clean Bevels

TSPROF Whole-Milled Fillet Clamps (2pcs)

  • TSPROF Whole-milled fillet clamps are designed for clamping knives with a spine thickness up to 3.5 mm, suitable for K03 and Kadet Expert sharpening systems. The shape of the outer surface is radially convex, it allows you to set the minimum sharpening angles. The minimum sharpening angle is 7.2 degrees. The clamps are made of a single piece of aluminum, allowing you to adjust the clamp to any shape of the blade and ensure the symmetry of the installation..
  • Thanks to the two gripping points, the deflection of the blade is impossible. It is possible to move the clamps independently, along the entire length of the frame. There is no need for calibration. With these clamps, it becomes possible to sharpen knives with "Scandinavian bevels" along the line of bevels..
Check Stock

Spyderco Ladybug 3 Salt Lightweight Folding Knife with 1.93

  • LADYBUG 3 - Spyderco Ladybugs come in a diverse collection of handle and blade materials. Our Ladybugs have a common denominator: they're small, innocuous, cut like the devil, carry well on a keychain and become a tool for everyday life..
  • FRN HANDLE - Fiberglass Reinforced Nylon is a polymer mixed with glass fiber then injection molded into formed and textured lightweight high-strength knife handles..
  • HOLLOW GRIND - It comes with bevels that are ground with a concave radius. The bevels may extend the full width of the blade (full hollow grind) or only a portion of its width..
  • PLAINEDGE - A sharpened knife blade with no serrations or teeth sometimes referred to as a smooth blade..
  • SPECIFICATIONS - Closed Length (Inches): 2.48, Overall Length (Inches): 4.41, Blade Length (Inches):1.93, Blade Steel: H-1, Grind: Hollow.
Check Stock

Spyderco Atlantic Salt Lightweight Folding Knife with 3.68

  • SALT SERIES - The Salt Series tackles rust through the groundbreaking use of nitrogen-based blade steels like H-1 and LC200N. The result is a diverse selection of knives that are incredibly resistant to corrosion..
  • FRN HANDLE - Fiberglass Reinforced Nylon is a polymer mixed with glass fiber then injection molded into formed and textured lightweight high-strength knife handles..
  • HOLLOW GRIND - It comes with bevels that are ground with a concave radius. The bevels may extend the full width of the blade (full hollow grind) or only a portion of its width..
  • SPYDEREDGE BLADE - Spyderco's two-step serration patterns consisting of one large and two small serrations. The pattern increases the cutting edge's surface area by up to 24%..
  • SPECIFICATIONS - Closed Length (Inches): 4.59, Overall Length (Inches): 8.27, Blade Length (Inches):3.68, Blade Steel: H-1, Grind: Hollow.
Check Stock

DEWALT Jig Saw, Top Handle, 5.5-Amp, Corded (DW317K)

  • Keyless, lever-action blade clamp for quick and easy blade changes of the jigsaw tool.
  • 5.5 amp motor of the jig saw deliver powerful cuts in the hardest materials.
  • Variable speed delivers 0 - 3,100 strokes per minute for optimal cutting speed.
  • 4-position orbital action provides control of cut quality and speed.
  • All-metal gear case provides superior durability on a professional site.
  • Shoe bevels 0 degree to 45 degree for beveled cuts.
  • Keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft.
  • 5.5 Amp motor deliver powerful cuts in the hardest materials.
  • variable speed delivers 0 - 3,100 strokes per minute for optimal cutting speed.
  • 4-position orbital action allows for faster, more aggressive cuts in a variety of materials.
Check Stock

Oneway Wolverine Grinding Jig with Quad Setup Jig for Sharpening Workshop Tools • Woodturning Gouges • Chisels • Scrapers • Skews and Wood Carving Tools

  • The Oneway Wolverine Grinding Jig is the core component of the Oneway Wolverine line of grinding products. Producing razor sharp tools and finely finished bevels has moved from an art into a science. Owning the Wolverine Grinding Jig will ultimately save you time, frustration and money..
  • The included Quad Setup Jig helps you correctly set the proper grinding angles for Roughing Gouges at 45 deg, Parting Tools at 30-60 deg, Skews at 21.5-43 deg and Bowl Scrapers at 8 deg. Its called the “Quad Setting Jig” since one jig sets the correct angles for all 4 of the other HSS woodturning lathe tools. The Quad Setting Jig is designed to be used with 8” bench grinders..
  • Carpenter chisels up to 1-1/4" wide can be sharpened using the Wolverine's Vee-Arm. The arm is adjusted to set the bevel, and the chisel can be ground with small sideways motions and light cutting pressure. Three or four strokes on a strop will generate a razor sharp edge. The Wolverine Grinding Jig comes wi....
Check Stock

Spyderco Assist Salt Knife with 3.68 H-1 Corrosion-Resistant Stainless Steel Blade and Lightweight Yellow FRN Handle - SpyderEdge - C79PSYL

  • Folding Knives - Locking folding knives are safe, compact, and easy to carry. They also happen to be where the Spyderco revolution began..
  • FRN Handle - Fiberglass Reinforced Nylon is a polymer mixed with glass fiber then injection molded into formed and textured lightweight high-strength....
  • HOLLOW GRIND - It comes with bevels that are ground with a concave radius. The bevels may extend the full width of the blade (full hollow grind) or....
  • COMBINATIONEDGE - Our combinationedge is a blade that is partially PlainEdge and partially SpyderEdge at the cutting edge..
  • Specifications - Closed Length (Inches): 4.87, Overall Length (Inches): 8.55, Blade Length (Inches):3.68, Blade Steel: H-1, Grind: Hollow.
Check Stock

Pet Hair Remover for Couch/Car 2Pack Mini Dog Hair Remover Easy To Clean Cat Hair Remover Car Detailing Squeegee Pet Hair Brush For Furniture Automotive

  • Pet hair remover is made of soft material. Clean carpeting, upholstery and roof-liner without fear of scratching delicate plastic, wood or chrome....
  • Practical modeling design. The long edge, arc edge and two bevels of the dog hair remover correspond to the cleaning of the plane, arc surface and....
  • The cat hair remover removes even the most stubbornly trapped dog and cat hair..
  • Easy to clean with water and reusable, sturdy..
  • Perfect for cleaning cars, carpets, couches, comforters, clothes and more..
Check Stock

Spyderco Vallotton Sub-Hilt Specialty Knife with 3.70' CPM S30V Premium Stainless Steel Blade and Black Textured G-10 Handle - PlainEdge - C149GP

  • Folding Knives - Locking folding knives are safe, compact, and easy to carry. They also happen to be where the Spyderco revolution began..
  • G-10 Handle - An epoxy filled woven glass fiber that is rigid, non-slip, and impervious to temperature changes and chemicals..
  • HOLLOW GRIND - It comes with bevels that are ground with a concave radius. The bevels may extend the full width of the blade (full hollow grind) or only a portion of its width..
  • PlainEdge Blade - This knife has a sharpened blade with no serrations or teeth sometimes referred to as a smooth blade..
  • Specifications - Closed Length (Inches): 5, Overall Length (Inches): 8.7, Blade Length (Inches):3.7, Blade Steel: CPM S30V, Grind: Hollow.
Check Stock

Spyderco Fish Hunter Fixed Blade Knife - Yellow FRN Handle with SpyderEdge, Hollow Grind, H-1 Steel Blade - Includes Boltaron Sheath - FB40SYL

  • FIXED BLADE KNIVES - Spyderco fixed blade knives offer the same Reliable High-Performance you expect from our ground-breaking folding knives. Proudly Crafted for Life with highly evolved ergonomics to minimize fatigue and increase cutting power..
  • FRN HANDLE - Fiberglass Reinforced Nylon is a polymer mixed with glass fiber then injection molded into formed and textured lightweight high-strength knife handles..
  • HOLLOW GRIND - It comes with bevels that are ground with a concave radius. The bevels may extend the full width of the blade (full hollow grind) or only a portion of its width..
  • SPYDEREDGE BLADE - Spyderco's two-step serration patterns consisting of one large and two small serrations. The pattern increases the cutting edge's surface area by up to 24%..
  • SPECIFICATIONS - Overall Length (Inches): 8.94, Blade Length (Inches):4.39, Blade Steel: H-1, Grind: Hollow.
Check Stock

Spyderco Jumpmaster 2 Fixed Blade Knife - Black FRN Handle with SpyderEdge, Hollow Grind, H-1 Steel Blade - Includes Boltaron Sheath - FB24SBK2

  • FIXED BLADE KNIVES - Spyderco fixed blade knives offer the same Reliable High-Performance you expect from our ground-breaking folding knives. Proudly Crafted for Life with highly evolved ergonomics to minimize fatigue and increase cutting power..
  • FRN HANDLE - Fiberglass Reinforced Nylon is a polymer mixed with glass fiber then injection molded into formed and textured lightweight high-strength knife handles..
  • HOLLOW GRIND - It comes with bevels that are ground with a concave radius. The bevels may extend the full width of the blade (full hollow grind) or only a portion of its width..
  • SPYDEREDGE BLADE - Spyderco's two-step serration patterns consisting of one large and two small serrations. The pattern increases the cutting edge's surface area by up to 24%..
  • SPECIFICATIONS - Overall Length (Inches): 9.33, Blade Length (Inches):4.49, Blade Steel: H-1, Grind: Hollow.
Check Stock

Plastic Garlic Twister Hand Twist Garlic Box Garlic Twister Crusher Garlic Press Mincer and Grinder Tools for Home and Kitchen

  • SIMPLE OPERATION: This garlic paste box is a very convenient small handheld device in the kitchen, which can quickly peel and mash garlic, simple and....
  • HIGH QUALITY: This garlic pressing garlic box is made of high-quality PP material, 2 colors, palm size, easy to hold, it saves a lot of time than....
  • EXCELLENT PERFORMANCE: This garlic press adopts a concave-convex design. The reinforced cutting teeth have two-way bevels, which makes the cutting....
  • SMALL AND PORTABLE: The palm-sized garlic cutting tool can be easily stored in a kitchen drawer, cabinet or bag, and it is convenient to store without....
  • EASY TO CLEAN: This garlic press box is easy to disassemble and clean. It can not only cut garlic, but also pepper, ginger, olives, etc. It has a wide....
Check Stock

Spyderco Manix 2 Lightweight Folding Knife - Dark Blue FRN Handle with PlainEdge, Full-Flat Grind, CPM S110V Steel Blade and Ball Bearing - C101PDBL2

  • Ready for Anything - The Manix 2 is an extremely capable full-sized folder that is known for it's strength and performance. Its broad blade provides exceptional cutting power, while its textured index finger choil and thumb ramp allow a forward grip..
  • Superior Blade Steel - We have developed CPM SPY27, a particle metallurgy stainless steel containing a proprietary mix of alloys, including vanadium, molybdenum, niobium, nitrogen, and cobalt.
  • Light and Durable - This Manix 2 handle is fabricated with Fiberglass Reinforced Co-Polymer. FRCP creates a tough, chemical and heat resistant handle that is extremely lightweight and versatile..
  • Low Friction - This knife features a blade ground with flat bevels that extend from the spine all the way to the cutting edge. This grind reduces drag during cutting and decreases overall weight..
  • High-Strength Lock - The Ball Bearing Lock features a patented compressive lock that wedges a ball bearing between a fixed anvil and the blade tang. The mechanism also serves as a detent to hold the blade in the closed position..
Check Stock