Top Cross Clamping

Rhino Rack Nautic 570 Side Loading SUP or Kayak Carrier with Tie-Downs & Universal Roof Rack Mounting System Large Padded Cradles for Gentle Watercraft Transportation Black 570

  • EXPERIENCE - Experience the latest kayak or SUP paddle board carrying technology with the Nautic 570 Side Loading Kayak Carrier. Designed & engineered in Australia, it features next gen design. Carry 1 kaya or 1 SUP on your roof rack cross bars..
  • CUSHION - The Nautic 570 Side Loading carrier comes complete with four santoprene rubber pads designed to cushion your kayak or SUP paddle board. The saddles offer a unique 180-degree rotation, making it easy for side mounting..
  • UNIVERSAL FITMENT - Includes universal mounting hardware designed to be compatible with all current roof rack systems by securely clamping around the roof rack cross bars. Fits elliptical, round, and square roof rack cross bars..
  • INCLUDES PADDED STRAPS - he Nautic 570 comes with all the necessary accessories to get you started including: cradles, two 18-foot tie down strap with buckle protectors, an installation key & instructions for easy setup..
  • 3 YEAR WARRANTY - Enjoy peace of mind with a three-year warranty against manufacturing defects, workmanship, or failure. Our products are so well built, you'll probably never need to use the warranty, so think of it as a mark of quality & peace of mind..
Check Stock

Roof Racks Cross Bars Compatible with 2014-2022 Subaru Forester with Lock, Aluminum Roof Rail Cross Bars, Low Wind Noise Rooftop Cargo Carrier Crossbars

  • 【Fitment】Exact lockable cross bars replacement compatible with 2014 2015 2016 2017 2018 2019 2020 2021 2022 Subaru Forester. OE# E361SSG000..
  • 【Durable Construction】High quality light weight aluminum roof rack crossbars with ABS base feets and anti-theft lock mounted on side rail, withstand max loading 68KG/150 LB, but 1/3rd lighter than other cargo bars to reduce fuel consumption! Strong support for your roof bags, roof boxes, roof basket, bike carriers, snowboard, surfboard, kayak, canoe, luggage and much more you want..
  • 【Reduce Wind Noise】Aerodynamic profile designed cross bars will reduce the wind resistance under 75 mph and will not impede normal skylight opening..
  • 【Easy Installation 】These roof bars are labeled "front" and "rear". Clamping designed roof luggage racks is easy to assemble & remove in minutes. Instruction or other necessary mounting hardware are attached..
  • 【Corrosion Resistance】Issyauto rooftop crossbars are solid even undergo numerous crash tests, wear simulations, and extreme heat, low temperature, humidity, sunlight, and harsh chemicals test..
Check Stock

iSportgo Camera Clamp Mount Gopro Mount for Cameras / Video Lights / Monitors / Gopro Hero...

  • This Clamp mount with 1/4" screw, made of plastics and rubber..
  • applicable for some cameras,lights, video lights, monitors,gopro hero etc,install on cross bars,tubes,handlebars,tripods etc.
  • Clamping Diameter range:16-40mm(0.6-1.5in),kindly try to measure the Diameter of tube before you purchase it.
  • Rotate the Nut plate upward, it could Lock the device in right place and direction.
  • Easy to Install,multi-angle rotation .If the mount do not meet your need or any question, our customer service are free-hassle for you to resolve your issue and accept replacement or refund ..
Check Stock

The Morgue Remix ReJex Remix [Explicit]

  • Material: This product is made of silicone recyclable material, which can be well attached to the adjacent parts of the ear and head. It feels mild....
  • Product function: This product can be used not only to highlight the ears, but also to prevent the ears from standing incorrectly. Suitable for babies....
  • Design: HUGVIDAS ear stickers widen the cross section by 4 cm, and set a clamping break point every 5 cm, allowing you to adjust the size according to....
  • Tip: This product needs to be stored in a dry area to keep the product clean and hygienic. The soft material made of silicone is easy to tear off. In....
  • Usage steps: This product is suitable for babies over 3 months old. It is recommended to use it for 3 to 4 hours each time, and use it again after 5-6....
Check Stock

IRWIN QUICK-GRIP C Clamp, 4-Inch (225104)

  • Clamp features a double-rolled thread for faster clamping and increased durability.
  • C-clamp has a larger swivel pad to reduce marring on work surfaces and increase stability.
  • Larger handle for greater clamping pressure with less effort and reduced hand fatigue.
Check Stock

MAXXHAUL 50220 52" Aluminum Roof Top Cross Bar Set-Pair

  • Constructed from high quality aluminum frame that is light in weight, easy to clean and will not rust, yet strong and durable.
  • Features a heavy duty molded clamping mechanism with a keyed locking device to ensure they stay in place and are firmly fastened to the side rails and provide stability. Each pair has a maximum load capacity of 150 lbs..
  • Each cross bar measures a maximum of 46" span (useable length) between the side rails to allow sufficient room to accommodate your equipment.
  • Easy to assemble and can be removed or uninstalled in minutes. Includes installation instruction, 2 keys and a hex key. No drilling is necessary..
  • Designed to minimize wind resistance and noise effectively..
Check Stock

BILITOOLS 15-Piece Bearing Puller Kit Ball Bearing Extractor Bearing Removal Tool Set

  • For the removal of bearings where normal pullers are unable to be used by locking into the bearing race itself..
  • For removing grooved ball bearings without having to dismantle the shaft..
  • Suitable for removal of a variety of blind bearings where traditional bearing and gear pullers will not reach..
  • Specification: Clamping width: 20 - 90 mm. Interchangeable heads: Ø 5.5 - 6 - 8 mm. Max. puller depth 200 mm. Suitable for use with ISO bearing sizes : 6004-6010 | 6201-6206 | 6300-6302..
  • Include: 1 x mechanical pressure spindle, 1 x cross-beam, 1 x center screw thread cap, 2 x side bolt with nut and washers, 2 x pulling bolt extension, 2 x extensions for pulling devices, 6 x adaptors.
Check Stock

Groz 7-inch Rapid Action Woodworking Vise | Cast Iron | “Toe-in” Feature 39011

  • Manufactured from close-grained cast iron for long trouble-free service.
  • Accurately machined housings assure smooth sliding movement.
  • Rapid Release via Counter-clockwise rotation.
  • screw will disengage and the front jaws slide freely.
  • Accurately fitted solid steel guide rods reduce wear and tear giving the vises a smooth and true parallel action, free of side or cross deflection.
  • Vise jaws are equipped with a “Toe–In” feature.
  • When fully closed, the jaws meet only at the top to provide even clamping on the whole depth of....
  • The steel main screw has buttress threads for smooth, accurate and responsive adjustment. Body and sliding jaw have provision for attaching wooden....
Check Stock

Woodpeckers Extended Slab Flattening Mill Great for DIY Live Edge Slab Tables With Router Sled Slab Clamping Dogs & Rails

  • MAKE YOUR OWN SLAB TABLES: With the Woodpeckers Extended Slab Flattening Mill you can now use your router to flatten slabs right in your own shop....
  • HUGE CAPACITY: The Extended Slab Flattening Mill adds an additional pair of 72" rails that can either replace the cross rails to increase width, or....
  • INCLUDES: Includes (4) 72" rails, (2) 48" rails, (1) router sled, (4) Slab Clamping Dogs and all assembly hardware. Does not include plywood or MDF....
  • BUILT IN USA: This Woodpeckers product is proudly built in the USA..
Check Stock

2-4-6 Blocks Matched Pair (2 Each), Hardened Steel RC 55-62, 23 Holes (2x4x6 Inches) 246 Precision Ground Machinist Set Up Blocks

  • Includes matched pair 2-4-6 blocks includes 2 blocks.
  • Made of precision-grade tool steel hardened and precise ground on all 6 sides of block, heat treated and case hardened to HRC 57-62.
  • Accuracy with squareness on all sides within .0002 per inch.
  • Cross drilling design gives minimum weight and maximum strength.
  • 23 holes consists of 5 tapped holes that are 5/8-11 for clamping and Holes - 18 untapped holes.
Check Stock

Bessey One Hand Trigger Clamps Medium EZR-SET

  • Set of 2 Track Clamps 6" Capacity Throat Depth 2 3/8" for use on track saw guides, 100 lb force.
  • Quick clamping, smooth operating, consistent clamping force for track saw quides & general clamping /spreading.
  • 4 5/8" to 12 1/8" spreading capacity, simple push button for reversing fixed jaw for change to spreading, no tools needed.
  • V-Grooved, non marring pressure pads included.
  • "Step Over" design jaw allows clamping over obstructions, includes ergonomic comfortable soft grips for easy clamping.
Check Stock

Cynamed Olsen Hegar Needle Holder Driver with Multicolor/Rainbow Titanium Coating - Premium Quality - Hemostat with Scissors and Locking Mechanism (5.5 in. (13.97 cm))

  • Aesthetic, titanium-bonded, multicolor coating for a unique look and experience..
  • Perfect for various applications such as suture removal, clamping, cutting etc..
  • Comfortable handle for user control and stability..
  • Made from German grade forging and stainless steel. Autoclavable and Corrosion-resistant..
  • Tip configuration: Cross-serrated jaws with groove.
Check Stock