Top Crosscut Saws

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw Right Side Dubby Sled

  • THE ORIGINAL DUBBY SLED From standard 4 sided panel cutting to the absolutely stunning heptagon frame you will be completely accurate with the angles....
  • WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24″ wide x 52″ long, and allows you to do them safely. Since the....
  • WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate....
  • WORKING WITH SMALL PIECES- No miter gauge on the market can offer you the margin of safety provided by the Dubby Sled. The versatile hold-down clamp....
  • WILL THE DUBBY FIT YOUR SAW? The Dubby sled is compatible with most cabinet and contractor table saws. However, your table saw should fall within the....
Check Stock

Fulton DIY Table Saw Crosscut Sled Kit with 2 UHMW Bars 2 Aluminum Tracks 1 Knob and 1 Bolt along with Full Color HOW TO BUILD YOUR OWN Crosscut Sled Guide Booklet

  • If you own a table saw, you probably have come across a situation or two where you need to make smaller cuts or make cross cuts. You may also have had the need to make repetitive cuts of the same length. Making small cuts, cross cuts and repetitive length cuts is where table saw crosscut sleds excel. Crosscut sleds help stabilize the work piece and are very accurate since they are essentially calibrated to your saw during the sled building process..
  • Some time ago we noticed a lot of companies had UHMW bars available for purchase. While we as a woodworking company know exactly what they are used for, many novice or non-woodworkers do not. That’s when we decided to create this package with pre-cut UHMW bars, pre-cut aluminum track, a knob and bolt and an easy to understand how to guide booklet so you can create your very own, custom crosscut sled to fit your table saw!.
  • UHMW bars are most commonly used as runners for crosscut sleds since they don’t produce as much friction as wood does. Another advantage is that UHMW won’t expand or contract like wood does during drastic weather changes. Each bar is approximately 3/4” x 3/8” which fits most standard table saw slots. UHMW bars are also slick and won’t leave any residue, dust or shavi....
Check Stock

SawStop TSA-SA48 Sliding Crosscut Table Attachment

  • This sliding table is built for versatility. Micro-adjust for detail cuts, and crosscut full sheets with the 55" travel and 48" crosscut capacity..
  • The fence is at least 15% larger than typical crosscut sliders, spanning 43" and extending past 58"..
  • Large flip-stops with scale and magnified lenses help ensure accurate, repeatable cuts every time..
Check Stock

TonGass DIY Crosscut Sled Kit for Table Saw - 2*UHMW Runner Bars 2* Aluminum Tracks 1* Knob & Bolt Set 8* Flat Heat Screws

  • Safety is our priority - This DIY table saw crosscut sled hardware kit will make crosscutting safer and more convenient. Avoid risking your limb when....
  • 13 PIECES CROSSCUT SLED HARDWARE - includes 2 pieces of 19” x 3/4” x 3/8” UHMW runner bars, 2 pieces of 12 inches aluminum mini tracks, 1 set....
  • PRE-CUT AND COMPLETE SET FOR YOUR CONVENIENCE - All the components of this kit are cut and designed specifically for the building of a crosscut sled.....
  • Please take note: The UHMW runners included in this kit will only fit standard 3/4-inch and 3/8-inch track slots and will not fit the Ryobi table saw....
  • FREE HOW TO BUILD A CROSSCUT SLED GUIDE BOOKLET - Follow to a tee or use as a guide, our easy-to-understand guide is perfect for all skill levels.....
Check Stock

Rockler 24 Aluminum Miter Bar - Aluminum Bar for Smooth-Sliding Action on Table Saws Router Tables Workbenches & More – For any Standard 3/4 x 3/8 Miter Slot – Accessories for Table Saw

  • 24" Aluminum Miter Bar: The Rockler miter track bar allows you to set up your jigs for smooth-sliding action on table saws, router tables, bandsaws,....
  • Adjustment Screws: This solid aluminum miter bar has nylon set screws in the miter bar that adjust in or out for a perfect fit in any standard 3/4" x....
  • Great For? Our miter slider bar is great for shop-made crosscut jigs, cutoff tables, taper jigs, and more. Available individually in 18", 24", and 36"....
  • Easy Assemble: Our miter bar slider makes it very easy to construct that ideal jig without dealing with the wood runners and the swelling issues. This....
  • Extremely Durable: Our miter bars for the table saw are made of high-quality aluminum alloy that will be strong and reliable for several years..
Check Stock

Velodi 2 PCS 6302-2RS Replacement Ball Bearing for DeWalt DW708 DW716 DW717 DW718 DWS780 Miter Saw# N127530

  • Compatible with: DeWALT: DW706 Type 1 12 Dual Bevel Miter Saw, DW708 Type 1 Crosscut Miter Saw, DW708 Type 3 Crosscut Miter Saw, DW708 Type 4 Crosscut....
  • Pre-Lubricated and Stable Performance and Cost Effective, Deep Groove Ball Bearings..
  • Double Seal Effectively Saves Grease and Prevent Impurities From Entering..
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw (Left Side Dubby Sled)

  • ...bby will allow you to make perfect cuts the first time you do them and keep your creative juices flowing with idea after idea. It is ideal for making frames but it also works very well for the cutting of tiny pieces while keeping your fingers out of harms way..
  • WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24″ wide x 52″ long, and allows you to do them safely. Since the panels don’t make contact with the table saw top, “walking” of the material is virtually eliminated. This will allow you to cut perfectly square panels for your furniture and cabinet making projects quickly, easily and accurately..
  • WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate than the average miter gauge, the scale has pre-determined lines for any shape (from 4 to 16 sides) you want to cut. This means no calculations, no hassles, and best of all, no test cuts for perfect results.
  • WORKING WITH SMALL PIECES- No miter gauge on the market can offer you the margin of safety provided by the Dubby Sled. The versatile hold-down clamp included with every Dubby will give you an extremely safe way to cut small pieces, and will easily pivot out of the way w....
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw (Left Side Dubby and Right Side Dubby Sleds are Included)

  • ...bby will allow you to make perfect cuts the first time you do them and keep your creative juices flowing with idea after idea. It is ideal for making frames but it also works very well for the cutting of tiny pieces while keeping your fingers out of harms way..
  • WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24″ wide x 52″ long, and allows you to do them safely. Since the panels don’t make contact with the table saw top, “walking” of the material is virtually eliminated. This will allow you to cut perfectly square panels for your furniture and cabinet making projects quickly, easily and accurately..
  • WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate than the average miter gauge, the scale has pre-determined lines for any shape (from 4 to 16 sides) you want to cut. This means no calculations, no hassles, and best of all, no test cuts for perfect results.
  • WORKING WITH SMALL PIECES- No miter gauge on the market can offer you the margin of safety provided by the Dubby Sled. The versatile hold-down clamp included with every Dubby will give you an extremely safe way to cut small pieces, and will easily pivot out of the way w....
Check Stock

DCT Woodworking Thin Rip Table Saw Jig Guide Tool for Router or Band Saw Cutting Wood/Ripping Chair Slates, Cabinet

  • ...ptimal placement in a standard 3/4-inch x 3/8-inch miter slot for a specific job.
  • Roller on the end acts as a stop for the material and allows the wood to flow past the jig without resistance.
  • VARIOUS APPLICATIONS: Rip thin slates for chair backs, frames for cabinets, use with band saws and routers, or even use as a crosscut stop for making multiple cutoffs on the right side of a saw blade.
  • Setup and use instructions are included for your convenience.
Check Stock

INCRA Build-It T-Slot Panel Connector 18-inch

  • The Incra Build-It Modular Jig &Fixture System is a highly versatile collection of jig and fixture "building blocks".
  • Simply connect the parts with a screwdriver and the included fasteners to produce in minutes what used to take hours or even days.
  • From tenoning jigs and crosscut sleds for your table saw to coping sleds for your router table.
  • You can build the perfect jig in minutes with INCRA’s new Build-It System.
  • Shooter boards, crosscut boxes, tenoning or tapering jigs and everything in between, the possibilities are endless.
Check Stock

DIY Crosscut Table Saw Sled Kit with Specific Guide Booklet to build your own crosscut sled for More Accurate and Safer in Saw Working, pack of 1

  • （Attention: The UHMW bars are not in 3/4″ by 3/8″ size）DIY your own crosscut sled – You may build your own unique sled to fit your table saw.
  • Make your desired crosscut sled size and meet your unique cutting requirements..
  • Accurate & Safe – Great improve cutting accuracy and make saw operations safer, and steady the work piece while shielding your finger from harm..
  • Quality Kit – UHMW bar is the most often used material in crosscut sled runners and it does not flex under sudden temperature changes and slides more smoothly as there is less friction.
  • The aluminum T track is solid extruded and can be trimmed to match your sled. (ATTENTION: The bars Do Not fit RYOBI table saw track slots).
  • Fun of DIY – Not only can you create your own unique table saw sled but also you can enjoy the processing of DIY, more motivated and confident in the following saw working..
  • Package Included – 2 UHMW bars, 2 T tracks, 1 star knob and bolt, wood secrets of varying lengths, and 1 specific guide booklet (glue and other building materials are not included).
  • Backs its products within 90 days warranty.
  • Please feel free to contact us with any questions you may have..
Check Stock

DIY Crosscut Table Saw Sled Kit with a Specific Guide Booklet to Build Your Own Tablesaw for More Accurate and Safer Saw Working, Table Saw Accessories, Pack of 1

  • ... table saw sled for your need, but also lies in the sense of accomplishment and creativity it brings, being more motivated and confident in the following saw working when you use it..
  • Vary Size – You may build your own unique sled to fit your table saw.
  • Make your desired crosscut sled size and meet your unique cutting requirements..
  • Table Saw Accessories - 3/4'' x 3/8'' UHMW bar is the often used material in crosscut sled runners which fits most table saw and will not expand under sudden temperature changes as well as slick enough to slide smoothly.
  • The aluminum t track is solid extruded and can be trimmed to match your sled.
  • (ATTENTION: The bars DO NOT fit RYOBI table saw track slots).
  • Package Included – Crosscut table saw sled accessories (2 UHMW bars (3/4'' by 3/8'' ), 2 T tracks, 1 star knob and bolt, wood screws of varying lengths) and 1 specific guide booklet (glue and other building materials are not included).
  • Backs its products within 90 days warranty.
  • Please feel free to contact us with any questions you may have..
Check Stock