Top Crowfoot Wrench Sets

5 PCS Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool

• 【Design】 Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
• 【USE】 Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
• 【Package】1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
• 【Material】 Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
• 【Service】100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..

5 PCS Automotive Oxygen Sensor Socket Wrench Removal Tool and Thread Chaser Set (Blue Case)

• Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
• Package1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads.
• USE Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
• Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
• Service100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..

DASBET 5pcs O2 Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set

• 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
• Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
• M12×1.25MM & M18×1.5MM Threads Chaser: Oxygen sensor thread chaser tool are used for cleaning and re-threading damaged spark plug hole. Cleans damaged spark plug ports and threads. Rethreads damaged spark plugs, eliminates corrosion and straights damaged threads. Reduces the chance of cross threading..
• This 5pcs oxygen sensor and threads chaser set is suitable for most contemporary vehicles. The oxygen sensor sockets fit on most cars and are ideal for the removal oxygen sensors..
• Durable: Made from high performance chrome molybdenum and solid cast steel construction for strength and durability, finish with black oxide to prevent rust..

ATPEAM Oxygen Sensor Socket Set 3 Piece O2 Sensor Socket Set Oxygen Sensor Removal Tool Set 1/2in and 3/8in Sq Drive

• Extra Durable: Constructed of heat-treated chrome vanadium steel, this oxygen sensor remover set is built for strength, durability, and longevity.
• Application: Sockets O2 Sensor Tool Set lets you quickly and easily remove oxygen sensors, oil pressure sending unit, fuel injectors, and vacuum switches.
• Features: 3/8-inch or 1/2-inch square drive to fit your O2 sensor wrench drives.
• For use with ratchet, breaker bar, or hand wrench (driver tools not included).
• Specification: The specification for these oxygen sensor sockets are: 1pc 3/8 inch Drive 7/8 inch (22 mm) Deep, 1pc 3/8 inch Drive 7/8 inch (22 mm) Crowfoot, and 1pc 1/2 inch Drive 7/8 inch (22 mm) Deep Crowfoot Sockets, 1pc plastic red or blue carrying case.
• Wide Application: Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.

Apeixoto Oxygen Sensor Removers 5PCS Oxygen Sensor Sockets with Packing Case Oxygen Sensor Socket Set Removal Tool

• Function: The Apeixoto oxygen sensor removers will help your in adjusting and removing oxygen sensors, oil pressure sending unit vacuum switches and fuel injections. These tools can be used most vehicles..
• Package: The package includes 5pcs sockets and wrenches included in the red case.The whole tool set comes in a solid red case which will protect the tools well during shipping and let you keep the tools well after usage..
• Specifications: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
• Material: The Apeixoto oxygen sensor removers and oil Pressure Sending Units are constructed with heat-treated chrome vanadium steel. It is totally rust and corrostion resistant. The surface has a black powder and it looks much more shinny..
• Warranty: 100% satisfaction. If you come across any issue or need any assists during usage, we are here to help..

BILITOOLS 14-Piece Jumbo Crows Foot Wrench Set, 1/2" Drive Big Crowfoot Wrench, Metric, 27-50 mm, CR-V Steel

• Set included: 27mm, 30mm, 32mm, 33mm, 34mm, 35mm, 36mm, 38mm, 41mm, 42mm, 45mm, 46mm, 48mm, 50mm.
• This wrench set is made of high strength chrome vanadium steel construction with rust preventative mirror chrome finish, that won’t easily break nor rust to promote long-lasting service life..
• This crows foot wrench set can be used with any 1/2″ drive ratchet, extension or torque wrench to reach tight, narrow spaces or deep recesses to get the job done..
• 1/2" drive jumbo crowfoot wrench set is designed for reaching fasteners and fittings in hard-to-reach areas or tight spaces..
• This jumbo crows foot wrench set is ideal for diesel and automotive maintenance in any car or truck garage..

Powerbuilt 10 Piece 3/8 Inch Drive SAE and Metric Crowfoot Wrench Set, Turn 3/8 inch Ratchet to Open Ended Ratcheting Wrench 6480380

• DURABLE WITH A LONG LIFE: Constructed from premium Chrome Vanadium steel.
• chrome plated mirror finish for durability.
• WORK FASTER AND EASIER: Crowfoot wrench set turns any 3/8 inch ratchet into an open ended ratcheting wrench.
• no need to remove and reseat the wrench between turns.
• WIDE COVERAGE: Wrench set includes both SAE and Metric wrenches in the most common sizes.
• 7/16 inch, ½ inch, 9/16 inch, 5/8 inch, 3/4 inch, 10mm, 13mm, 15mm, 16mm, 18mm.
• PRECISION CONSTRUCTION: Meets or exceeds ANSI standards.
• Convert any 3/8-Inch drive ratchet or bar into an open end wrench.
• SAE wrenches include 7/16, 1/2, 9/16, 5/8, 3/4-Inch.
• Metric wrenches include 10mm, 13mm, 15mm, 16mm, 18mm.
• Meets or exceeds ANSI standards. Lifetime warranty.

Brewing Trouble: A Paranormal Women’s Fiction Novel (Crow’s Feet Coven Book 2)

• 【HIGH QUALITY MATERIAL】The material of the crowfoot wrench is carbon steel, heat-treated, chrome-plated surface. The material of the ratchet handle is carbon steel, heat-treated, knurled, electroplated, round head handle..
• 【SPECIFICATION】3/8” Square drive open end crows foot wrenches – Sizes included (SAE/Standard): 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 ”..
• 【EXTEND YOUR REACH】These handy problem solvers give you more options when you are trying to get at fasteners in tight awkward spaces..
• 【EASY STORAGE】Mounted on a convenient storage rail. Each wrench size is permanently stamped for simple identification..
• 【WIDE APPLICATION】Crow’s feet wrench adapters speed up installations & removals fitting perfectly on any 3/8” drive ratchet extension or torque wrench reaching inaccessible fasteners that sockets can’t get to – Great for car automotive & truck work in tight engine/radiator areas like o2 sensors or for underneath sink/toilet work like faucet spray hoses..

BILITOOLS 15-Piece Universal Ratcheting Serpentine Belt Tool Set

• Complete tool set for removing or installing the serpentine belt on vehicles with a spring-loaded belt tensioner pulley..
• Combines the advantages of a ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible combination..
• Comes with extension for hard-to-reach belt tensioners. Eight low profile sockets and extension help to fit into tight spots..
• Includes Drive Tools: 14" extension arm, ratcheting wrench with 19 mm female ratchet drive, and 3/8", 1/2" and 3/4" square adapters.
• Includes Sockets: 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm and 19 mm. Includes Crowfoot Wrenches: 13 mm, 14 mm and 15 mm..

RockShox 31mm Flat Wrench for Vivid Air Reservoir

Sunex 97436A 1/2-Inch Drive 36-mm Jumbo Crowfoot Wrench

• Sunex tools hand tools-hands on control for every size and shape.

GEARWRENCH 10 Pc. 3/8' Drive Crowfoot Wrench Set, Metric - 81909

• Crowfoot wrenches provide greater access to hard-to-reach fasteners and fittings.
• Open end wrench works on fasteners when there are height restrictions.
• Bright, full polish chrome finish wipes easily clean and resists rust and corrosion.