Top Cryogenic Liquid

proturbo 60pcs 10ml Lab Plastic Frozen Test Tubes Plastic Graduated Vial Tube with Screw Caps Vial Seal Cap Container for Laboratory School Educational

  • Material: the test tubes are made of high-quality PP plastic material, safe, sturdy and durable. Resistant to low temperature and can be frozen for a long time..
  • Capacity: each plastic graduated vial tube is 10ml capacity with clear scale marked, which is very easy to read..
  • Easy to use:the plastic frozen test tubes can clearly see the liquid position, the scale is clear, the tube body has 1-10ml calibration, easy to read the accurate liquid volume..
  • Suitable for scenes: these plastic cryogenic tubes not only a great choice for schools, hospitals and scientific laboratories, but also an ideal choice for placing earrings, jewelry, pills, seeds, needles and other small objects..
  • Package including: each package contains 60 pieces 10ml frozen test tubes,sufficient in quantity to meet your laboratory tests..
Check Stock

Bonvoisin Cryogenic Gloves 14.2 /36cm Long Mid-arm LN2 Protective Gloves for Liquid Nitrogen/Dry Ice/Cold Storage

  • LOW TEMPERATURE RESISTANT: This gloves can resist cold and keep warm at a temperature of -260°C/-436°F..
  • MATERIAL: This cryogenic gloves made of high-quality cow leather, comfortable and durable..
  • STORAGE: Gloves should be stored in a dry, moth-proof, well-ventilated area..
  • NOTE: The cryo gloves are not waterproof, and the antifreeze effect is poor when wet..
  • APPLICATION: Suitable for liquid nitrogen, dry ice, low temperature warehouse, frozen laboratory, cold storage..
Check Stock

50 Pieces 5 ML Test Tubes Plastic Cryovial Tubes with Blue Screw Caps and Flat Bottom Clear Sample Vial Container Graduated Tube for Science, Labs

  • Capacity: 5 ml. Package includes: 50 pieces cryogenic vials. Tube color: translucent..
  • High quality plastic material with good temperature resistance and sealing property, safe and sturdy..
  • With 1-5 ml calibration, easy reading of the liquid volume. Easy to use..
  • Resistance to low temperature, can be frozen for a long time..
  • Perfect for lab sample storage. Strongly corrosive liquids are not recommended..
Check Stock

Polycarbonate Freezer Boxes, Polycarbonate CryoBox Vial Rack, Freezer Storage, 9 x 9 Array, 81 Place, 130mm Length x 130mm Width x 52mm Height. Fit for 2ml Cryostorage Freezing Box (Pack of One)

  • 1in, 100-well polycarbonate freezer boxes for liquid nitrogen freezing or freezer storage.
  • Compatible with 0.5ml, 1.5ml, 2.0ml, or 5.0ml microtubes and cryogenic vials.
  • Numbered grids for sample identification.
  • Temperature range: stable from -196C to 121C.
Check Stock

DALSTRONG Pitmaster BBQ & Meat Knife - 6.5 inch - Shogun Series ELITE - Forked Tip & Bottle Opener - Japanese AUS-10V Super Steel - G10 Handle - w/Sheath

  • ...turing a forked-tip for flipping meat directly on the grill and transferring foods from grill to plate. Built-in bottle opener..
  • Precision forged from a single piece of ultra premium Japanese high-carbon AUS-10V steel with 67-alternating layers of SUS410 Damascus cladding for stain-resistance and durability. Precise cryogenic tempering with liquid nitrogen increases the steel's crystalline structure, enhancing strength, flexibility and hardness..
  • Engineered to Perfection: The curved blade is engineered to create leverage and complete cuts in a single motion, without sawing. The knife is expertly crafted to slice through flesh, break through cartilage and trim fat from beef, pork, poultry, fish and other meats..
  • Dalstrong Power: Improving this blade further are the rock-hollow divots, which minimize adhesion, prevent stuck on food and reduce friction for a more seamless cutting experience. Featuring a beautiful, ergonomic and ambidextrous G10 Garolite handle with mosaic and engraving. The triple riveted design with full tang ensures superior strength and durability..
  • See why over seventy-five thousand professional chefs and home cooks love and trust the DALSTRONG DIFFERENCE. 100% SATISFACTION OR MONEY BACK GUARANTEE, try it risk free, we know you'll love ....
Check Stock

Narex 6 Piece Richter Extra Bevel Edge Chisel Set (1/8, 1/4, 3/8, 1/2, 3/4 and 1) in 9 Pocket Canvas Tools Roll

  • ...ls are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes..
  • Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance..
  • Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails..
  • Chisel handles are made of domestically and responsibly harvested European Ash known for its strength, toughness and attractive grain. The ergonomic handles are sanded and then receive a friction shellac finish for maximum protection, comfort and control. Solid stainless-steel ferrules protect the handles from splitting, and leather washers absorb the shock of mallet blows..
  • This set comes in a canvas tool roll a....
Check Stock

Narex Richter Extra Bevel Edge Chisel with Cryogenic Treated Cr-V Steel Hardened to HRc 62 Ergonomic Ash Handles Stainless Steel Ferrule (1/2 inch)

  • ...ls are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes..
  • Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance..
  • Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails..
  • Chisel handles are made of domestically and responsibly harvested European Ash known for its strength, toughness and attractive grain. The ergonomic handles are sanded and then receive a friction shellac finish for maximum protection, comfort and control. Solid stainless-steel ferrules protect the handles from splitting, and leather washers absorb the shock of mallet blows..
Check Stock

Narex Richter Extra Bevel Edge Chisel with Cryogenic Treated Cr-V Steel Hardened to HRc 62 Ergonomic Ash Handles Stainless Steel Ferrule (3/4 inch)

  • ...ls are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes..
  • Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance..
  • Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails..
  • Chisel handles are made of domestically and responsibly harvested European Ash known for its strength, toughness and attractive grain. The ergonomic handles are sanded and then receive a friction shellac finish for maximum protection, comfort and control. Solid stainless-steel ferrules protect the handles from splitting, and leather washers absorb the shock of mallet blows..
Check Stock

Narex Richter Extra Bevel Edge Chisel with Cryogenic Treated Cr-V Steel Hardened to HRc 62 Ergonomic Ash Handles Stainless Steel Ferrule (1/8 inch)

  • ...ls are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes..
  • Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance..
  • Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails..
  • Chisel handles are made of domestically and responsibly harvested European Ash known for its strength, toughness and attractive grain. The ergonomic handles are sanded and then receive a friction shellac finish for maximum protection, comfort and control. Solid stainless-steel ferrules protect the handles from splitting, and leather washers absorb the shock of mallet blows..
Check Stock

HEZHEN Chinese Chef Knife 6.8 Inch- Meat Cleaver Chinese Cleaver Knife,Vegtable Cleaver，Cut Meat knife ,Premium Damascus Powder Steel--Natural Rosewood Handle-Master Hammered Finish Series

  • ...).As the internal element crystals are uniform and consistent during smelting,so the knives are manufactured reliably with its sharpness and uniform texture.It is more durable and sharp than traditional Damascus steel and VG10..
  • [Traditional Craftsmanship] With traditional craftsmanship, handed sharpening and vacuum cryogenic heat treatment, the Rockwell is as high as 62°- 64°.The angle of edge is 15°per side so suitable for both of right and left hand.The hammered surface reduces the stickiness of ingredients on the knives..
  • [Super Sharp Blade] Made by high quality super carbon Damascus steel.After plasticized, compressed and heat treated, it improves the thickness to protect the core steel, and enhances the sharpness. The blade steel is treated deep freezer in liquid nitrogen to improve hardness flexibility and corrosion resistance..
  • [Ergonomic Rosewood Handle] Selected natural rosewood and mosaic brass rivet meeting the requirements of human engineering.You can control the cutting safely and comfortably..
  • [Trustworthy Quality] HEZHEN is committed to pursuing the fun of knife colliding with ingredients. We promise reliable quality assurance.If there are any problems with our items or services,please don not hesitate to contact us in advance.Whether ....
Check Stock

HEZHEN Damascus kitchen knives Set With Block,Pro Knife Set-7PC,Premium Powder Steel Boxed Knives Sets,Natural Rosewood Handle,Suitable For Home Cooking Or Restaurant,Master Hammered Finish Series

  • ...).As the internal element crystals are uniform and consistent during smelting,so the knives are manufactured reliably with its sharpness and uniform texture.It is more durable and sharp than traditional Damascus steel and VG10..
  • [Traditional Craftsmanship] With traditional craftsmanship, handed sharpening and vacuum cryogenic heat treatment, the Rockwell is as high as 62°- 64°.The angle of edge is 15°per side so suitable for both of right and left hand.The hammered surface reduces the stickiness of ingredients on the knives..
  • [Super Sharp Blade] Made by high quality super carbon Damascus steel.After plasticized, compressed and heat treated, it improves the thickness to protect the core steel, and enhances the sharpness. The blade steel is treated deep freezer in liquid nitrogen to improve hardness flexibility and corrosion resistance..
  • [Ergonomic Rosewood Handle] Selected natural rosewood and mosaic brass rivet meeting the requirements of human engineering.You can control the cutting safely and comfortably..
  • [Trustworthy Quality] HEZHEN is committed to pursuing the fun of knife colliding with ingredients. We promise reliable quality assurance.If there are any problems with our items or services,please don not hesitate to contact us in advance.Whether ....
Check Stock

Narex 853600 5 Piece Boxed Set of Richter Extra Bevel Edge Chisel (1/4, 3/8, 1/2, 3/4 and 1 inch) Cryogenic Treated Cr-V Steel Hardened to HRc 62 Ergonomic Ash Handles Stainless Steel Ferrules

  • ...ls are made from the finest materials available, have undergone superior heat treatment and been manufactured using the most stringent manufacturing processes..
  • Richter chisel blades are made from the highest quality Chrome Manganese (Cr-V) steel using traditional drop-forging methods. Blades are then hardened, cryogenically treated and tempered to achieve a minimal hardness of 62 HRc. Following initial hardening, cryogenic treatment is performed which cools the steel down to −190° C (-310o F) using liquid nitrogen. This alters the mechanical properties of the steel at the molecular level greatly increasing its strength, toughness and wear resistance..
  • Subsequent fine-grinding and polishing ensure a mirror-like surface with ultra-thin sides allowing reach into very tight spaces, making them the perfect chisel for cleaning out dovetails..
  • Chisel handles are made of domestically and responsibly harvested European Ash known for its strength, toughness and attractive grain. The ergonomic handles are sanded and then receive a friction shellac finish for maximum protection, comfort and control. Solid stainless-steel ferrules protect the handles from splitting, and leather washers absorb the shock of mallet blows..
Check Stock