Top Ct1000p1ssd8

Rockford Fosgate Punch P1-1X10 Single P1 10' Loaded Subwoofer Enclosure Ported

  • The P1-1X10 is a single P1 10” SVC subwoofer in a vented enclosure that reproduces low bass frequencies accurately with high output SPL (Sound Pressure Level).
  • The P1-1X10 vented loaded enclosure is Internally wired to create a 4-Ohm amplifier load with power handling of 250 Watts RMS / 500 Watts Max.
  • Punch Loaded enclosures are constructed with durable 5/8" MDF material and feature a proprietary high-flow, low-noise port with high current binding posts for maximum signal flow to the speaker inside.
  • The P1-1X10 loaded enclosure measures at 13.125" x 17" x 15.125" (HxWxD).
  • Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller.
Check Stock

2 HP Lawn Sprinkler Irrigation Pump Repair Kit, Model 023705

  • Service Repair kit for 2 HP lawn sprinkler irrigation pumps.
  • Includes an impeller, diffuser, motor shaft seal (mechanical seal), diffuser gasket and pump body gasket.
  • This kit fits the Star HSP20P1, Do It Best HSPJ20P1, Utilitech UTP20P1, and Zoeller 1333-006.
Check Stock

DEWALT DCST972B String Trimmer, Yellow/Black

  • Dewalt replacement auxiliary handle, part number 90603783.
  • Compatible with: DCST920B Type 2, DCST920B Type 3, DCST920P1 Type 1, DCST920P1 Type 2, DCST920P1 Type 3, DCST990B Type 1, DCST990B Type 2, DCST990H1 Type 1, DCST990H1 Type 2, DCST990M1 Type 1, DCST990M1 Type 2, DCST990X1 Type 2.
  • Measures approximately 7.15 X 7.70 X 2.30 inches.
Check Stock

DEWALT OEM 90601087 Replacement String Trimmer Spool DCST920 DCST990

  • Compatible with: DCST920B Type 2, DCST920B Type 3, DCST920P1 Type 1, DCST920P1 Type 2, DCST920P1 Type 3, DCST970X1 Type 1, DCST990B Type 1, DCST990B Type 2, DCST990H1 Type 1, DCST990H1 Type 2, DCST990M1 Type 1, DCST990M1 Type 2, DCST990X1 Type 2.
Check Stock

FAPEA Replacement Parts for Kenmore 46-9083, 9083, 9030, 46-9030 Compatible with 4396841, P2RFWG2, 4609083, 469030,(3COUNT)

  • Compatible with 46-9030, 46-9083, 9030, 9083, P2RFWG2, P2WG2, P2WG2L, Ｆilter3, T1KB1, T1KB2 , T1RFKB1, T1RFKB2, P1KB1, P1KB2, P1RFKB1, P1RFKB2..
  • Provides comprehensive protection for the health of you and your family..
  • No spеcial tools rеquired. Just insеrt watеr line into built-in plugs еliminating the risk of lеaks.
  • For optimum pеrformancе, it is rеcommended for you to replacе the every 6 month or 300 gallon..
  • If you are not satisfied with our products, we will give you a refund or a full refund exchange service..
Check Stock

Irritec P1 5/8' drip tape - 15 mil - 6' Spacing - .25 GPH - 1000' Roll

  • P1 drip tape has no seams for more reliability and uniform installation..
  • P1 drip tape is manufactured using injection molded drippers for a high degree of plugging resistance and uniform water distribution over long runs..
  • P1 drip tape is used in both above ground and subsurface installations with equal success..
  • The low profile drippers welded on the inside wall keeps friction loss to a minimum..
  • Each dripper has an integrated inlet filter to prevent clogging..
Check Stock

Finish Kare BWM 101 - Hi- Temp Paste Wax BWM 1000P - Case 12 cans

  • Give your vehicle a beautiful high gloss finish – that new car shine!.
  • Protect your boats, RVs and cars in hot climates.
  • Leaves a durable film that is resistant to UV rays, hard water and natural elements.
  •  BWM 101 used to be known as BWM 1000P, but due to the confusion with our 1000P Mold Release product, the name was changed..
Check Stock

Irritec P1 5/8' drip Tape 15 mil 6' Spacing 0.46 GPH 500' Roll

  • P1 drip tape has no seams for more reliability and uniform installation..
  • P1 drip tape is manufactured using injection molded drippers for a high degree of plugging resistance and uniform water distribution over long runs..
  • P1 drip tape is used in both above ground and subsurface installations with equal success..
  • The low profile drippers welded on the inside wall keeps friction loss to a minimum..
  • Each dripper has an integrated inlet filter to prevent clogging..
Check Stock

Irritec P1 5/8' drip tape 15 mil 12' Spacing 0.46 GPH 1000' Roll

  • P1 drip tape has no seams for more reliability and uniform installation..
  • P1 drip tape is manufactured using injection molded drippers for a high degree of plugging resistance and uniform water distribution over long runs..
  • P1 drip tape is used in both above ground and subsurface installations with equal success..
  • The low profile drippers welded on the inside wall keeps friction loss to a minimum..
  • Each dripper has an integrated inlet filter to prevent clogging..
Check Stock

Irritec P1 5/8' drip tape 15 mil 8' Spacing 0.46 GPH 1000' Roll

  • P1 drip tape has no seams for more reliability and uniform installation..
  • P1 drip tape is manufactured using injection molded drippers for a high degree of plugging resistance and uniform water distribution over long runs..
  • P1 drip tape is used in both above ground and subsurface installations with equal success..
  • The low profile drippers welded on the inside wall keeps friction loss to a minimum..
  • Each dripper has an integrated inlet filter to prevent clogging..
Check Stock

Irritec P1 5/8' Drip Irrigation Tape 15 mil 6' Spacing 0.25 GPH 100'

  • P1 drip tape has no seams for more reliability and uniform installation..
  • P1 drip tape is manufactured using injection molded drippers for a high degree of plugging resistance and uniform water distribution over long runs..
  • P1 drip tape is used in both above ground and subsurface installations with equal success..
  • The low profile drippers welded on the inside wall keeps friction loss to a minimum..
  • Each dripper has an integrated inlet filter to prevent clogging..
Check Stock

Irritec P1 5/8' drip Tape 15 mil 6' Spacing 0.25 GPH 500' Roll

  • P1 drip tape has no seams for more reliability and uniform installation..
  • P1 drip tape is manufactured using injection molded drippers for a high degree of plugging resistance and uniform water distribution over long runs..
  • P1 drip tape is used in both above ground and subsurface installations with equal success..
  • The low profile drippers welded on the inside wall keeps friction loss to a minimum..
  • Each dripper has an integrated inlet filter to prevent clogging..
Check Stock