Top Cup Rotary Brushes

uxcell 10Pcs Carbon Brushes,for Electric Motor,10mmx5mmx5mm,Power Tool,Replacement Repair Part

  • Carbon Brush Size (Approx.): 10 x 5 x 5mm / 0.39" x 0.2" x 0.2" (L*W*H).
  • Package Content: 10 x Motor Carbon Brushes.
  • Carbon motor brushes are one of the most commonly replaced power tool components..
  • Worn brushes are often the cause of a poorly running motor. Replacing brushes can fix an intermittent motor and restore a motor’s electric braking..
  • The brushes are used widely for various of power tools and electric motors, such as circular saw, miter saw, drill,rotary hammer drill, dust collector, motorcycle, weed whacker, chop saw, blower motor, cut-off saw and ..
Check Stock

3Pcs 3 Inch Assorted Cup Brushes Abrasive Wire Nylon Cup Brush for Drill,Grit 80 120 320 with 1/4\ Shank

  • These Nylon Cup Brushes Maintains shape & will not rust，Will not shed bristles under normal conditions..
  • Material: nylon composite grinding sand.So Nylon Bristle Brush safe to use than steel wire brushes, will not puncture skin..
  • Applications: Removing paints, corrosion, weld scale, surface rust & burns from metals.Can also be used for wood polishing and deburring.
  • These Nylon Cup Brushes with 1/4" shank fit most drill,Max RPM: 4,500.
  • 3 different grit of these abrasive brush to meet different grinding requirements.
  • Package include:1×Cup brush red-80#,1×Cup brush gray-120#,1×Cup brush blue-320#.
Check Stock

uxcell 10Pcs Carbon Brushes,for Electric Motor,12mmx8mmx5mm,Hand Drill,Blower,Blender,Power Tool,Replacement Repair Part

  • Carbon Brush Size (Approx.) ：12x 8 x 5mm (L*W*H).
  • Package Content: 10 x Motor Carbon Brushes.
  • Carbon motor brushes are one of the most commonly replaced power tool components.
  • Worn brushes are often the cause of a poorly running motor. Replacing brushes can fix an intermittent motor and restore a motor’s electric braking..
  • The brushes are used widely for various of power tools and electric motors, such as circular saw, miter saw, drill,rotary hammer drill, dust collector, motorcycle, weed whacker, chop saw, blower motor, cut-off saw and ..
Check Stock

BOSCH 1-9/16-Inch SDS-Max Combination Rotary Hammer RH540M, Blue

  • CONVENIENT: The Bosch RH540M Combo Rotary Hammer features the SDS-max Bit System for tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate.
  • POWER: This rotary hammer provides the best in class impact energy of 6.1 ft.-lbs. Weighing only, 15.2 lbs., the RH540M provides maximum productivity in all day drilling and chiseling applications.
  • VERSATILE: The RH540M features a combination dual mode selector knob to allow users to select between hammer drilling, chiseling only and the Vario-Lock function.
  • EFFICIENT: With Varo-Lock Positioning, the rotary hammer rotates and locks chisel into 12 different positions to optimize working angle. The tool also comes complete with service minder brushes to notify users when maintenance is needed.
  • VARIABLE SPEED: The variable speed dial allows for controlled drilling and chiseling applications. The motor is rated at 170 to 340 RPM in rotary mode and 1,200 to 2,750 BPM in hammer mode, which will easily reduce concrete to dust.
Check Stock

uxcell 10Pcs Carbon Brushes,for Electric Motor,20mmx6mmx6mm,Power Tool,Replacement Repair Part

  • Carbon Brush Size (Approx.): 20 x 6 x 6mm / 0.79" x 0.24" x 0.24" (L*W*H).
  • Carbon motor brushes are one of the most commonly replaced power tool components..
  • Worn brushes are often the cause of a poorly running motor. Replacing brushes can fix an intermittent motor and restore a motor’s electric braking..
  • The brushes are used widely for various of power tools and electric motors, such as circular saw, miter saw, drill,rotary hammer drill, dust collector, motorcycle, weed whacker, chop saw, blower motor, cut-off saw and ..
Check Stock

uxcell Carbon Brushes for Electric Motors 13mm x 7.5mm x 6.5mm Replacement Repair Part Set of 10

  • Carbon Brush Size (Approx.): 13mm x 7.5mm x 6.5mm(L*W*H).
  • Package Content: 10 x Motor Carbon Brushes.
  • Carbon motor brushes are one of the most commonly replaced power tool components..
  • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power..
  • The brushes are used widely for various of power tools and electric motors, such as circular saw, miter saw, drill,rotary hammer drill, dust collector, motorcycle, weed whacker, chop saw, blower motor, cut-off saw and angle grinder..
Check Stock

Glass Cleaning Brush, 3 Brush Glass Washer – Triple Glass Rinser, Cup Washer Brush, Glass Brushes for Washing Glasses

  • USE ANYWHERe: Dampen the inside of the suction base and press onto the flat surface of a sink (towards the front of the sink) or on any flat, non-porous countertop.
  • NO BATTERIES OR POWER NEEDED: Place the cup brush cleaner in your sink and press down for suction grip, apply dish detergent to the brushes, wet and invert (flip) the glass, and twist it back and forth on the bristles to clean, then rinse.
  • PERFECT SIZE: Each individual brush has 5.5-inch height x 2.5-inch diameter (14cm x 6.4cm).
  • 1-inch (2.5cm) long bristles fit glasses and ceramic mugs, can clean up jars after canning, or scrub clean any cup with a 2-inch (5.1cm) or larger diameter.
  • BUILT TO LAST: Rubber suction cup base, PVC plastic thread on brushes, (3) nylon bristle brushes.
  • Individual brushes are easy to replace and install (threads into base).
Check Stock

Abrasive Wheel Buffing Polishing Wheels for Drill Wire Brushes Wheel for Cleaning Brass Steel Bristles Wool Buff Polish Bits Set Rotary Tool Accessories Fit 3mm Collet Brass

  • Abrasive wheel works on removing scratches,polishing brushes wheel good for cleaning, removing rust, paint, and finishing, different materials and shapes buff wheels fit for different use..
  • Small buffing wheels for rotary tools. Great for polishing and cleaning small parts that need detailing. Polishing wheels fit in small areas that are hard to access..
  • Buffing wheels set work with a good sticky rouge compound they will provide some good polished shining finishes, will create some good coloring effect..
  • Polishing wheels with 3mm shaft diameter,fit for most Dremel Rotary Tools, Polishers, Hand Drill and Grinding tool with 3mm collet..
  • Package Included: 10*Abrasive Wheels. 10*Cotton Buffing Wheels. 10*White Polishing Wheels(stacked). 30*Wire Brushes Wheels..
Check Stock

WENORA 4 Inch Abrasive Filament Nylon Cup Brush for Angle Grinder 5/8 11 Thread Nylon Wheel Brush for Grinders -Remove Rust Corrosion Paint for Surface Pre-Treatment of Various Metals 2 Pack

  • High Quality Particles: Our 4" angle grinder nylon brush has coarser abrasive particles to easily remove rust, corrosion.It can also remove burrs from surfaces such as metal, wood and ceramics..
  • Greater compatibility: Abrasive filament nylon cup brush with standard 5/8- 11 threaded arbor for direct use with 4-1/2 angle grinders. The included 1/4" drill adapter mandrel can be used with most drill bits..
  • Long-Lasting: The angle grinder nylon brushes are designed to last many times longer than wire brushes, and as the nylon strands wear, they expose new embedded abrasives, providing consistent cleaning results..
  • Nylon brushes do not spark as much as wire brushes when removing rust and working on surfaces, and they maintain the same stability at high speeds in angle grinders, making them ideal for grinding cup brushes..
  • Wide Applications: angle grinder cup brushes will allow both light duty conditioning works on metals,woods or others..
Check Stock

4000 Carbon Brushes Compatible with dremel Rotary Tool 4Pcs

  • Compatible with Dremel Rotary Tool 4000.Size: 6.3x4.8x8.4mm..
  • Step 1: Use the wrench to open the cover of carbon brush. Step 2: Take out the carbon brush. Step 3: Replace with the new carbon brush. Step 4: Use....
  • Package Included: 4 x Carbon Brushes.Manual measurement, please allow 0.3 mm error..
  • Because this brush is very small, sometimes it may fall out of the bag, or the number is not right. If you receive the wrong number of carbon brushes,....
Check Stock

WEN 230282A 282-Piece Rotary Tool Accessory Kit with Carrying Case

  • Features 282 accessories for sanding, carving, deburring, cutting, drilling, grinding, polishing, engraving, as well as many other verbs.
  • Wire-bristled brushes work great for rust removal, paint stripping, pumpkin carving, and more.
  • Grinding discs and bits perfect for sharpening knives or trimming dog toe nails.
  • Includes diamond-coated metal bits, HSS cutters, sanding discs, cutting discs, spindle sanding bands, buffing wheels, drill bits, polishing paste and more.
  • Compatible with the WEN rotary tools, as well as any other rotary tool that accepts bits with 1/8-inch shanks.
Check Stock

43\ Universal 1/8 Flex Shaft Rotary Tool Extension Complete Set with Pen Grip for Dremel

  • UNIVERSAL FIT ADAPTER: Will fit all 1/8 Flexible Chuck (3.175mm) for rotary tool, electric grinder, electric power drill including for use with Dremel Rotary Tool.
  • COMFORT GRIP PEN TIP: Ergonomic pen design with smooth metal surface makes easy, comfortable carving, sanding and polishing. It can used with polishing kits, drill bits, wire brushes, cut off wheels countersinks, flap wheels, mounted stones, grinding wheels, abrasive bits and more.
  • WORKING IN TIGHT SPACES: Ideal for engraving and jewelry making the 43" Flexible Shaft Rotary Tool simplifies working in cramped spaces and allows the user more freedom while working on DIY projects.
  • QUALITY MACHINING AND LONG LIFE: For best performance and long life, be sure to apply a greasing lubricant to the inner flex shaft parts as needed. Like all tools proper care and attention will extend the longevity of the tool.
Check Stock