Top Current Regulator
Aeromotive 11186 In-Line Brushless 5.0 Gear External Fuel Pump with Mounting Feet, 1 Pack
- Integral, external brushless controller for clean installation, cooler fuel and enhanced reliability.
- Supports naturally aspirated engines up to 3400 HP with EFI, up to 3600 HP carbureted and forced induction up to 2600 HP with EFI and up to 2700 HP carbureted.
- Capable of 90-psi continuous operating pressure, 150 psi peak, base plus boost.
- EFI rated flow of 1, 700 lbs./hour at 40 psi, 13.5 Volts.
- carb rated flow of 1, 850 lbs./hour at 9 psi, 13.5 Volts.
- Reduced current draw at higher, EFI pressures.
- lighter than the traditional external mount pumps.
- extended service life in methanol and ethanol.
- Pressure regulator not included (sold separately) - for EFI applications use regulator P/N 13134 or P/N 13110, for carbureted applications use regulator P/N 13202 or P/N 13212.
Check StockAexit 25Pcs SS8550 Transistors SOT-23 Y2 Package SMD SMT PNP Triode Transistor CMOS Transistors 40V 1.5A
- Package Content : 15 x Voltage Regulator.
Check StockNQN 2-Stage Automatic Changeover LP Propane Gas Regulator with Two 18" RV Pigtail Propane Hoses with Gauge, Stainless Braided QCC1 1/4" Inverted Male Flare
- 【2-Stage Auto Changeover LP Propane Gas Regulator】This 2-Stage regulator can be connected to 2 propane tanks at the same time and automatically switches from primary to reserve tank when primary is empty and The indicator will changes color to let you know when a tank has been depleted and needs to be refilled also remind you switching to the backup tank. For RVs with dual propane tanks allow removal of Allows removal of empty cylinder for refill without interrupting propane supply..
- 【Specification & parameters】RV Propane Regulator: Primary Cylinder Capacity 210,000 BTU/hr, Reserve Cylinder 130,000 BTU/hr. Inlets are 1/4" SAE Inverted Flare, Outlet is 3/8" Female NPT, RV Pigtail Propane Hose: 1/4" Male Inverted Flare and QCC1 Fitting. All Fitting Connectors of Propane Hose, both ends of 2-stage regulator made of 100% Solid Brass. RV propane hose made of durable stainless steel braided. Propane Hose and regulator with CSA Certification ensure air tightness 、stability.
- 【2 Pack 18''Stainless Braided QCC1 1/4" Inverted Male Flare RV Pigtail Propane Hose with Gauge】1/4" inverted male flare stainless steel braided RV pr....
Check StockAir Compressor Pressure Regulator with Dial Gauge, 0-175 PSI Air Gauge for Air Compressor and Air Tools (Four Way Valve)
- Four Way Valve: This air pressure regulator has four holes. Three holes of 1/4″ NPT and one hole for 1/8″ NPT..
- Package included: 1 x Air Pressure Regulator (Four-way valve), 1x Dial gauge for the 1/8″ , 1 × 1/4″ × 1/4″ Male Pipe, 1 × Nickel-plated Iron Air Plug, 1 × Nickel-plated Iron Air Coupler, 1 ×Thread Pipe Plug, 1 × Hex Wrench, 2 × portable Teflon tapes..
- Max pressure: 175PSI, 12BAR. Practical and durable, easy to install and disassemble..
- With the barometer: This regulator comes with a dial gauge meter, it can be set and read the data..
- With the valve knob: can according to need to adjust air pressure. In use it can help to save electric energy..
Check Stock20 Pieces 3 Pins AMS1117-3.3 DC 4.75V-12V to 3.3V Voltage Regulator Down Power Supply Buck 800mA Module
- ... to install: please check the product pictures carefully for the wiring diagram steps before using, simple dual-panel design and the input output using the 3 pin single row pin for easy connection, the input voltage is higher than output voltage 1.2V, the module will work normally.
- AMS1117-3.3 is a positive voltage regulator step down power supply module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
- Electronic devices partner: the 3 pins AMS1117-3.3 voltage regulator mini step down power supply module, can be applied to electronic devices which need 3.3V power supply, such as SCM project design, MCU development and more, easy to be connected and provide the power supply.
- Where to use: the voltage to 3.3V 800mA DC buck module is applicable for high-efficiency linear regulator published active power regulator battery charger active instrument.
- Compatible with: the 3 pins AMS1117-3.3 voltage regulator mini power supply is compatible with Arduino MEGA2560, MSP430 development board, 3.3V low power consumption MCU, FPGA/CPLD PLD programmable logic systems, ARM7 ARM9 ARM11 STM32, etc..
- Provide more safety: the AMS1117-3.3 800mA DC buck module features overheat shutdown circuit provides overload and over-temperature protection, ....
Check StockGenuine Yamaha AC Adapter Power Supply DC12V 700mA 12.5W Model: PA-3C 12V
- ...A x2, 12v 100mA x1, 18v 100mA x1. Each circuit has its own short circuit and overcurrent protection, i.e. a short circuit on one output will not affect the function of the other outputs..
- Short circuit and overcurrent protection: In this power supply we use the best high-current output buck switching type integrated regulator circuit, this integrated chip has a complete protection circuit, capable of current limiting and thermal shutdown circuit. The other components can form an efficient regulator circuit structure with over-current protection and over-temperature protection..
- LED Light: Each output of the pedal power supply has a blue LED indicator, and if one is faulty, the light will not turn on. This helps the musician to quickly locate the fault. The lights also help to find the power connector at night and play a good lighting effect on the stage of the performance..
- Versatility: the pedalbord power supply has a compact body and 5 feet disconnectable AC power cord, no power adapter, plug and play, easy to carry.Wide input voltage range of 100v to 240v is ideal for international travel, equipped with 4 AC Outlet, total output power of 600w, can be used as a plug-in board for smartphone, tablet and other small electronic devices..
Check StockKeeYees 7-70V 30A PWM DC Motor Speed Controller Switch Control 12V 24V 36V 48V with 30 Amp Fuse
- 【Wide Voltage】: Wide voltage input 7-70V, maximum output current 30A (Please refer to the recommended power range for actual use current. It is recommended that 12V within 250W, 24V within 350W, 48V within 450W, and 60V within 500W. ).
- 【Speed Control Knob】: The knob has a switch function, which can control the motor speed from 0% to 100%. Adjustable potentiometer flexible cable can be separated, the cable length is 15CM..
- 【30A Fuse】: This set contains a 30A fuse to prevent shorting of the motor interface. Double protection of your Motor and Motor Speed Controller..
- 【Note 1】: The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent)..
- 【Note 2】: If there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward -reverse circuit regulator of the children's car. Otherwise, the speed controller may be damaged..
Check Stock7-80V 30A PWM DC Motor Speed Controller Switch Control 12V 24V 36V 48V with 30 Amp Fuse
- ①【Wide Voltage】: Wide voltage input 7-80V, maximum output current 30A (Please refer to the recommended power range for actual use current. It is recommended that 12V within 250W, 24V within 350W, 48V within 450W, and 60V within 500W. ).
- ②【Speed Control Knob】: The knob has a switch function, which can control the motor speed from 0% to 100%. Adjustable potentiometer flexible cable can be separated, the cable length is 15CM..
- ③【30A Fuse】:The set is equipped with a 30A insurance. Protection of your Motor and Motor Speed Controller. And is equipped with a spare insurance, which can be quickly replaced and repaired..
- ④【Note 1】: The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent)..
- ⑤【Note 2】: If there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward -reverse circuit regulator of the children's car. Otherwise, the speed controller may be damaged..
Check Stock2-Stage Automatic Changeover LP Propane Gas Regulator with Two 18" RV Pigtail Propane Hoses with Gauge, Stainless Braided QCC1 1/4" Inverted Male Flare, Propane LP Gas Regulator for RV Camper Trailer
- ❤【GardenNow Upgraded 2-Stage Auto Changeover LP Propane Gas Regulator】This Rv Propane Regulator allow you to hook up 2 Propane tanks and automatically switches from primary to reserve tank when primary is empty and vice versa. The indicator will changes color to let you know when a tank has been depleted and needs to be refilled also remind you switching to the backup tank. For RVs with dual propane tanks allow removal of empty cylinder for non-stop refill without interrupting propane supply..
- ❤【2 Pack 18 inch Stainless Braided QCC1 1/4" Inverted Male Flare RV Pigtail Propane Hose with Gauge】1/4" inverted male flare stainless steel braided RV propane pigtail hose to 1/4" inverted male flare. (Not the 1/4" Male NPT. Please check your connector before you order it.) This propane tank hose come with tank gauge level indicator with 3 different colors Dial Gauge can glows in dark, allows you to read and monitor the gas level without necessarily removing the tank, and can detect the leak..
- ❤【Specification & Material】RV Propane Regulator: Inlets are 1/4" SAE Inverted Flare, Outlet is 3/8" Female NPT, Primary Cylinder Capa....
Check StockEEEKit 20A Solar Charge Controller, 12V/24V Solar Panel Battery Intelligent Regulator with Dual USB Port PWM Auto Parameter Timer Setting Adjustable LCD Display, Blue
- 20A SOLAR CHARGE CONTROLLER: 20A Solar panel battery intelligent regulator are UL 1741 certified, the solar charger controller compatibility with 12V 24V system. Discharge current: 10A, build-in industrial microcontroller, automatically manage the working of solar panel and battery in solar system. Dual USB output 5V/2.5A (max), to support mobile phone charging..
- SIX PROTECTION FUNCTIONS: 20A solar controller has Short-circuit protection, Overload protection, Over Current Protection, Overcharge protection, Under-voltage protection, Over-voltage protection. Fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery..
- BATTERY TYPE: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL, it is not suited for nickel hydride, lithium, Liions, or other batteries. In order to protect the lifespan of the battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically..
- FUNCTIONAL LCD DISPLAY: Intuitive LCD display that can clearly indicate the status and data is able to switch modes and parameter configuration, suitable for home, industrial, commercial, etc..
- EASY TO USE: The charge controller should connect the battery first, then the solar panel, finall....
Check StockVGEBY ESC XT60 Electronic Brushless Speed Controller 30A for RC Drone RC Airplane Helicopter(3.5mm Bullet Plugs)
- * Smooth Control-- The singlechip microcomputer adopts an independent voltage regulator chip, which avoids the power interference caused by the BEC load change and improves the working stability..
- * High Efficiency-- The output MOSFET power tube is equipped with an independent heat sink to reduce the temperature rise of the device and improve the high current working capability of the system..
- * Good Antiinterference-- The power input terminal adopts ultralow impedance and largecapacity electrolytic capacitor, which improves the antiinterference ability..
- * 30A Current Operation-- Made of high quality electronic components, dependable to use. Features 30A continuous current and 40A peak current..
- * Applicable for-- Practical accessory for RC remote control drone, helicopter and FPV, etc. Easy to install, no complicated operations required..
Check StockLOTOS LTP6000 60Amp Non-Touch Pilot Arc Plasma Cutter, Brown, 3/4
- ...ed Warranty: include 1 Year NEW Replacement Warranty. US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website..
- SETUP WITHIN 1 MIN: The pre-installed NPT 1/4 industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min..
- PACKAGE INCLUDES: 60AMP Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4 industry type D plug and Air filter regulator, consumables, Instruction Manual, etc..
Check Stock