Top Custom Exhaust Header

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Erweater 2 Roll 2″ x 50ft Titanium Exhaust Wrap Header Wrap Roll Kit, for Motorcycle Car Manifold Header Pipe Heat Wrap Tape with 10pcs Stainless Ties

  • Made of high quality thickened fiberglass material with locked edges on both sides for easy breakage. Exhaust pipe wrap can reduce the heat under the hood by up to 50%, improving the performance of cars and motorcycles..
  • It can work for a long time at high temperature from 900 to 1000 degrees Celsius! Stronger and more durable for improved thermal performance and reliability Highly resistant to wear, oil leaks, temperature and vibration damage..
  • Extremely flexible for a tight and secure wrap. Improved horsepower performance for automotive exhaust header wraps, motorcycle exhausts, gas pipes and other custom applications..
  • Soak header heat wrap in water prior to installation so the fiberglass doesn’t fly around. Put on gloves (not included), wrap it around the exhaust pipe, secure it with an overlap (like the grip of a tennis racket), and simply secure the ends with stainless steel ties..
  • Package includes two 2″ x 50 ft rolls of heat wrap, 10 stainless steel zipper ties. If you have any questions or are not satisfied, please feel free to contact us..
Check Stock

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

  • 1-1/8 inch width x 1-1/2" height Stock Square Port.
  • Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 2032 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-1/4 inch width x 1-5/8 inch height Oval Port.
  • Chevy V8 -Small Block 262 - 400, 1-1/4" x 1-5/8" Oval Port, For Raised Weld Bead Headers , 2/Set.
  • additional sealing material is provided around the weld bead to provide a better seal.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Moroso 73626 Ult40 Spark Plug Wire Set

  • Ultra 40 Custom Fit Wire Set, Blue Wire, Sleeved, Ford 351W HEI.
  • 8. 65mm diameter wire with 40 ohms of resistance per foot.
  • Sleeving adds extra dielectric strength which is wire’s ability to not be affected by outside electrical pulses.
  • Sleeving extends spark plug wire life and protects against exhaust header heat, chaffing and contaminants.
Check Stock

Moroso 73615 Wire Set, Ultra 40 Sleeved

  • ultra 40 custom fit wire set, blue wire, sleeved, bbc, over vc/hei.
  • 8. 65mm diameter wire with 40 ohms of resistance per foot.
  • sleeving adds extra dielectric strength which is wire’s ability to not be affected by outside electrical pulses.
  • sleeving extends spark plug wire life and protects against exhaust header heat, chaffing and contaminants.
Check Stock

Exhaust Header for Coleman Powersports CT200U-EX 196cc/6.5HP Gas mini bike.

  • “This is custom made Exhaust Header, Coleman Powersports CT200U-EX Camo 196cc/6.5HP Gas Powered Trail Bike Scooter..
Check Stock

Moroso 73602 Ultra 40 Spark Plug Wire Set SBC 90 HEI

  • Ultra 40 Custom Fit Wire Set, Blue Wire, Sleeved, SBC, Over VC/HEI.
  • 8. 65mm diameter wire with 40 ohms of resistance per foot.
  • Sleeving adds extra dielectric strength which is wire’s ability to not be affected by outside electrical pulses.
  • Sleeving extends spark plug wire life and protects against exhaust header heat, chaffing and contaminants.
Check Stock

Moroso WIRE SET,ULTRA 40,SLEEVED,BBC,BLACK 73819

  • Ultra 40 Custom Fit Wire Set, Black Wire, Sleeved, BBC, Over VC/HEI.
  • 8. 65mm diameter wire with 40 ohms of resistance per foot.
  • Sleeving adds extra dielectric strength which is wire’s ability to not be affected by outside electrical pulses.
  • Sleeving extends spark plug wire life and protects against exhaust header heat, chaffing and contaminants.
  • Complete, ready to install sets available for specific engines.
Check Stock

Pirate Mfg Chrome Header 6Pt Head 16Pc Bolt Kit Compatible with BB Chevy BBC V8 396-454

  • Dynatech header flanges are of the highest quality for a great start to your exhaust header.
  • 1/4 thick and CNC laser cut for a clean transition from the cylinder head port to the header tube.
  • This is made of mild steel for a strong long-lasting construction.
  • A great exhaust system starts at the beginning - the flange and gaskets.
  • A big Dynatech advantage is the wide selection of port matched flanges.
Check Stock

Remflex 2004 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, ('55 - '00), Round Port, Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1426.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1440.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock