Top Custom Ic

Juno Lighting 27HZ-WH LED Tapered Downlight Cone Trim, 6-Inch, White Trim with Haze

  • Juno trim series 27 is designed for a 6-inch juno housing and has an aperature of 5.75 inches. Perfect when paired with incandescent and LED juno housings.
  • Airtight and energy Star when paired with select housings - see spec sheet for complete List.
  • Compatible with IC22, IC22 W, IC22S, IC22R incandescent housings with 5W PAR30, 75 PAR30L or 65W BR30 light bulbs.
  • Compatible with IC2, TC2, TC2R housings and can be used with 50W PAR30, 75 PAR30L or 65W BR30 Light bulbs.
  • Compatible with IC22LED, IC22RLED and TC22LED LED housings.
Check Stock

USB Female Type-B Port 4-Pin Right Angle PCB DIP Jack Socket-White 10 Pack by MUZHI

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

Spektrum S2200 G2 AC 2x200W Smart Charger, SPMXC2010

  • Up to 200W power per channel or 380W on one channel for fast charging.
  • Charges AND balances Smart G2 batteries with one simple IC3 or IC5 connection — no separate balance lead needed.
  • Auto Charge recognizes Smart battery charging parameters and begins safe, accurate charging automatically when connected.
  • Smart software tracks and stores numerous smart battery data.
  • Includes IC3 and IC5 charging output ports — eliminating the need for a separate IC3 or IC5 adapter to charge Spektrum Smart batteries.
Check Stock

Bitray Professional Tool Chip Extraction Tool PLCC IC Extractor Chip Spring Assisted Extractor Puller Removal Puller Tool

  • Package includes: U Type IC Chip Extractor x 1 + PLCC IC Chip extractor x 1..
  • The U-shaped IC extractor is used to pull out the IC chip on the circuit board. It is easy to use and simple. It is an ideal tool for families and students to do experiments..
  • PLCC IC chip extractor is a spring-assisted extraction tool, specially designed to remove PLCC..
  • The body is made of stainless steel, and there is a PVC insulation package outside to prevent static electricity from damaging the IC components..
  • It is very suitable for professional maintenance personnel, such as TV/DVD/PC maintenance personnel or IC workers..
Check Stock

uxcell 17pcs DIP IC Chip Socket Adaptor Round 28 Pin 2.54mm Pitch Dual Row 15.24mm Row Pitch

  • Row to Row Distance(Approx):15.24mm/ 0.6".
  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

  • As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
  • When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
  • when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
  • Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
  • Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.
Check Stock

MB-118 Mobile mounting Bracket for IC-7200

  • High quality louder speaker and microphone units provide clear audio communication 8-pin plug with easy metal clip at the top.
  • Built-in PTT and microphone is very handy.
  • Talk and listen without ever HOLDING your radio/transceiver.
  • Compatible With: ICOM HM-36 Microphone IC-718 IC-7000 IC-7200 IC-7600 IC-7800.
Check Stock

Genie 26966D Garage Door Opener Chain Idler Pulley Genuine Original Equipment Manufacturer (OEM) Part

  • This part is compatible with models including.
  • PMX300-IC/A,PMX300-IC/B,PMX500-IC/B,IC250,PMX65,PMX75,PMX85,IC250B,PMX80,PMX500-IC/A,ALC SERIES,PMX60,RCD SERIES.
  • Chain idler pulley 26966D guides the chain cable through the end of the rail closest to the door.
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Genie.
  • This chain idler pulley (part number 26966D) is for garage door openers.
  • Shut off the electrical power before installing this part.
Check Stock

RT Systems USB-RTS-05 Programming and Data Cable with 2.5mm Plug for ID-31/51 Series ID-4100 and ID-5100 Radios

  • USB-RTS05 – 2.5mm Plug – Not interchangeable with USB-82. 6' cable length..
  • Programming with RT Software: ICOM: ID-31, ID -31 PLUS, ID-51, ID-51PLUS, ID-51PLUS2, IC-80, ID-880, IC-2820, ID-4100, ID-5100.
  • Data with Software from Other Sources: ICOM: IC-80, IC-91, ID-880, IC-2200, IC-2820.
Check Stock

Liyafy PLCC IC Chip Extractor Motherboard Circuit Board Component Puller and U Shape IC Chip Extractor Puller ROM Extraction Tool Kit

  • U shape IC extractor is used for pulling ic chip on circuit board. Handy Tool..
  • PLCC IC Chip extractor is spring assisted extraction tool designed for removal of PLCC..
  • Package includes: 1, U shape extractor x1.
  • Adopt and metal and shielded plastic to avoid static charge damage IC components..
  • Perfect for professional repair man, such as TV/DVD/PC repairman or IC workers..
Check Stock

IWISS Extractor Tool, Removal Tools for Weather Pack and Metri-Pack Connectors-3 Pack

  • Quality material: 4-claw picker is made of quality metal and plastic,strong and sturdy, Anti-rust and strong grip,U-shaped IC extractor and PLCC IC chip puller,they’re all stainless body and covered with PVC insulting shell,small size,easy to carry,The test pencil is mainly composed of plastic and colloid,can be applied for a long time..
  • Design and practicality: 4-claw design of 4-claw picker can firmly grasp small objects such as fixing screws, and it is not easy to fall.The non-slip material of the U-shaped IC extractor and the labor-saving U-shaped design can reduce hand fatigue, saving effort.The small hook design of the PLCC IC chip puller can quickly pull out and install the IC conductor without being hurt.The electric tester can test whether there is electricity to avoid electric shock..
  • Package content: 4-piece professional picking tool set. you will get a 4-claw picker ,a U-shaped IC extractor,a PLCC IC chip puller and a test pencil. It is an indispensable tool for maintenance workers, students and teachers who need experiments..
  • Universal sized: the total weight of the 4 pieces tools about 100 g. 4-claw picker each size 12 x 1 cm/ 4.8 x 0.4 inch, U-shaped extractor about 11 x 5 cm/ 4.3 x 2 inch, PLCC IC chip puller each size 10 x 5 x 1.5 cm ....
Check Stock

Juno Lighting 17 CWH Halogen Recessed Cone, 50 watts, 4 Inch, Unfinished, Clear Alzak with White Trim

  • Juno 4-inch incandescent clear alzak cone with white trim has an aperture of 3.34 inches. Trim is 5 inches wide.
  • Juno 4-inch cone trim is air light listed when paired with the juno IC1 housing.
  • Compatible with IC1, IC1W, IC1S, IC1P, TC1, TC1S and TC1R housings and can be used with 50W PAR20 or 50W R20 light bulb.
  • Compatible with IC1P housing and can be used with 40W K19 Light bulb.
  • Compatible with TC1RCW housings and can be used with 50W PAR20 light bulbs.
Check Stock