Top Cut Off Toolholder

WIDIA WIDIA Metcut 7F2-1125T Spade Blade Insert, 1.1250\/28.575mm, 132 Deg, Right Hand Cut, T-15 HSS, TiN Coating, Seat Size 2

  • Universal application for most plain and alloyed steel applications as well as for cast iron and stainless steels.
  • Great where rigidity, coolant supply, or speed and feed rates are limiting factors.
  • Use as a substitute to HSS drills for higher productivity and lower total costs.
  • Interchangeable with other conventional spade blade holders.
  • Intermediate diameters and specific toolholder length quickly available upon request.
Check Stock

WIDIA WIDIA Metcut 7F3-1875T Spade Blade Insert, 1.8750\/47.625mm, 132 Deg, Right Hand Cut, T-15 HSS, TiN Coating, Seat Size 3

  • Universal application for most plain and alloyed steel applications as well as for cast iron and stainless steels.
  • Great where rigidity, coolant supply, or speed and feed rates are limiting factors.
  • Use as a substitute to HSS drills for higher productivity and lower total costs.
  • Interchangeable with other conventional spade blade holders.
  • Intermediate diameters and specific toolholder length quickly available upon request.
Check Stock

THINBIT 3 Pack LGPT045D2 'L' Series, Uncoated Carbide, Parting Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts within .062" of collet face or shoulder of larger diameter..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 2000 carbide parting insert for steel, cast iron and stainless steel with interrupted cuts..
  • Use with Large series toolholders. Use any straight or 90 degree toolholder..
Check Stock

THINBIT 3 Pack LGPT115D2 'L' Series, Uncoated Carbide, Parting Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts within .028" of collet face or shoulder of larger diameter..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 2000 carbide parting insert for steel, cast iron and stainless steel with interrupted cuts..
  • Use with Large series toolholders. Use any straight or 90 degree toolholder..
Check Stock

THINBIT 3 Pack LGPT045D5 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts within .062" of collet face or shoulder of larger diameter..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use any straight or 90 degree toolholder..
Check Stock

THINBIT 3 Pack LGPT085D5 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts within .043" of collet face or shoulder of larger diameter..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use any straight or 90 degree toolholder..
Check Stock

THINBIT 3 Pack LGPT045D57L 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts within .062" of collet face or shoulder of larger diameter..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use any straight or 90 degree toolholder..
Check Stock

THINBIT 3 Pack LGPT062D2L 'L' Series, Uncoated Carbide, Parting Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M04 or sub-spindle side using M03..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 2000 carbide parting insert for steel, cast iron and stainless steel with interrupted cuts..
  • Use with Large series toolholders. Use LH straight or RH 90 degree toolholder..
Check Stock

THINBIT 3 Pack LGPT045D2R 'L' Series, Uncoated Carbide, Parting Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M03 or sub-spindle side using M04..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 2000 carbide parting insert for steel, cast iron and stainless steel with interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree toolholder..
Check Stock

THINBIT 3 Pack LGPT025D5R 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M03 or sub-spindle side using M04..
  • Use for parting solid stock up to .400" or tubing with wall thickness up to .200"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree toolholder..
Check Stock

THINBIT 3 Pack LGPT062D5R 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M03 or sub-spindle side using M04..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree toolholder..
Check Stock

THINBIT 3 Pack LGPT025D5R7R 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts flush to collet face or shoulder on main spindle side using M03 or sub-spindle side using M04..
  • Use for parting solid stock up to .400" or tubing with wall thickness up to .200"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use RH straight or LH 90 degree toolholder..
Check Stock