Top Cutting And Drilling Tool

Micro Drill Bits -10Pcs Tungsten Carbide Macro Drill Bits Set, PCB Drill Bit Set, Mini Drill Bit 1/8\ Shank for Print Circuit Board, Amber, Jewelry, CNC Punching Engraving(1.1-2.0mm)

  • Specification: Cutting edge diameter (CED): 0.2mm.
  • shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.).
  • Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience.
  • Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy.
  • High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.
  • Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment.
Check Stock

uxcell PCB Drill Bits 1.1mm-2.0mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 1 Set (10 Pcs)

  • Specification: Cutting edge diameter (CED): 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm.
  • Cutting Edge Length: 10.5mm, 10.5mm, 12mm, 10.5mm, 12mm, 10.5mm, 12mm, 12mm, 12mm, 12mm.
  • shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.).
  • Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience.
  • Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy.
  • High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.
  • Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment.
Check Stock

uxcell 20mm Reduced Shank Drill Bit HSS 6542 Black Oxide with 1/2 Inch Straight Shank

  • High Speed Steel tool - 20mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance.
  • Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes.
  • Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal.
  • Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life.
Check Stock

uxcell 28mm Reduced Shank Drill Bit HSS 6542 Black Oxide with 1/2 Inch Straight Shank

  • High Speed Steel tool - 28mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance.
  • Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes.
  • Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal.
  • Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life.
Check Stock

uxcell 21mm Reduced Shank Drill Bit HSS 6542 Black Oxide with 1/2 Inch Straight Shank

  • High Speed Steel tool - 21mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance.
  • Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes.
  • Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal.
  • Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life.
Check Stock

Sandvik Coromant 880-D1200L20-03 Corodrill 880 Indexable Insert Drill, 880.L-03 (01) Tool Style Code, 0.787\ Shank, 20 mm Shank Diameter (Pack of 1)

  • INDEXABLE DRILL: Versatile, carbide insert drilling tool and inserts for excellent tool life and holemaking performance.
  • Patented STEP TECHNOLOGY to deliver excellent cutting force balance and indexable drilling productivity.
  • INSERT SIZE & POCKET POSITIONING: Size 880-01 insert size, Central and Periphery drilling inserts.
  • DRILL SHANK AND TYPE: Cylindrical with flat shank, coolant through the drill, metric design.
  • With CoroDrill 880, you can do more than just drilling a hole. The tool can also be used for helical interpolation, boring, plunging, and turning..
Check Stock

uxcell 14.5mm Reduced Shank Drill Bit HSS 6542 Black Oxide with 1/2 Inch Straight Shank

  • High Speed Steel tool - 14.5mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance.
  • Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes.
  • Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal.
  • Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life.
Check Stock

Drill America DMOD1/8 1/8 Solid Carbide Drill Bit DMOD Series

  • Designed for drilling abrasive materials when drilling accuracy must be maintained.
  • Can be used in high temperature drilling applications.
  • Used on materials such as cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, bronze, hard rubber, plexiglass, and other similar....
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle.
  • Must be used with a rigid tool-holding systems..
Check Stock

TUNTROL 780W Flex Shaft Rotary Tool, Thicken 1/4' Shaft Foot Pedal Control Hanging Grinder Carver Electric Multi-function Metalworking Tools Repair Kit

  • 【Thicken Shaft】Our 1/4" Shaft is double stronger than 5/32" shaft, which give you more confidience on cutting or drilling bigger work pieces..
  • 【Powerful Motor】Our flexible shaft rotary tool is equipped with a powerful and stable 110V 780W motor, which can provide the speed of 500-24000 RPM. This rotary engraver machine is ideal for large-scale work that cannot be completed by mold grinder or rotary tool. Which can enough for limitless purposes from your DIY furniture remodeling to intricate automobile repairs and expert jewelry making..
  • 【Comfortable Stepless Speed Foot Pedal】 The foot pedal adds a lot comfort during work. The ABS plastic foot pedal for flex shaft rotary tool is sturdy and more secured for preventing heat production or transfer..
  • 【1/4" 3-Jaw Chuck】The stable and convenient 3-jaw chuck for the jewelers tools accepts accessories from 1/64", 1/32", 1/16", 3/32", 1/8", 5/32", 3/16", 1/4"to enhance versatility. Attachments are easy to replace and strong clamping force holds them firmly on the flex shaft drill under high pressure..
  • 【105+30pcs Tool Accessories】This high-performance rotary tool kit is extremely useful for cutting, drilling, sanding and polishing in small and delicate areas. These sanding power tools are sensit....
Check Stock

APEXFORGE M6 Variable Speed Rotary Tool Kit, Keyless Chuck & Flex Shaft, 172 Pcs Accessories, 6-Speed, 4 Attachments & Carrying Case for Craft Projects/DIY Creations/Cutting/Engraving

  • ...rving, grinding, and engraving and gives more stability.
  • Cutting Guide is suitable for different depth cutting, and keeps good perspective and stability..
  • 6-speed (10,000-35,000RPM) & Ventilation: The 135W motor provides powerful power for cutting, grinding, engraving, drilling, cleaning/polishing, etc.
  • Variable speed range from 10,000 to 35,000 RPM allows you to adjust rotation speed flexibly. 6 variable speeds, provides precise rotary tool control. Large vents dissipate heat in time, allowing the rotary tool to be operated for a long time..
  • 172 Pcs Accessories & Sturdy Case: Versatile 172 pcs accessories so that you can effectively complete different projects. Very suitable for sanding, polishing, cutting, sharpening, drilling, cleaning, carving, etc. Great for a variety of DIY & crafting projects like wood drilling, metal engraving, glass carving, etc. All accessories are compatible with major brands. Machine and accessories all are well organized packed in sturdy case, resistant to drops and moisture, and easy to carry and hang..
  • Compact Design & Keyless Chuck: Compact design makes it lightweight an....
Check Stock

uxcell PCB Drill Bits 4mm Tungsten Carbide Spiral Flute Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8\ Shank

  • Specifications: Cutting edge diameter (CED): 4mm / 0.157".
  • Long Tool Life: Made from tungsten carbide, high hardness, high wear resistance, high strength, resistance to bending, anti-impairment, long service life..
  • Spiral Flute Bits: Spiral flute drill bits reduce cutting force and prevent drill broken, improve the drilling accuracy. Large drill bit chip space, chip resistance, chip smooth, small drilling heat..
  • Precision: With sharper cutting edge, milling groove and clean surface, the carbide PCB drill bits can work quickly and cleanly, no glitches or scrap left..
  • Applications: Great for PC boards, plastics, fiberglass, wood, soft metals. Suitable for PCB drilling machines, engraving machine, CNC and high precision special drilling equipment..
Check Stock

APEXFORGE M12 Cordless Rotary Tool, 12V 2.0Ah Battery, 5-Speed 35000 RPM, Keyless Chuck, Type-C Charging Port, 110 Pcs Accessories, 2 Attachments, Carry Bag, Ideal for Sanding, Cutting, Carving

  • 12V Powerful Motor & 5-Speed: APEXFORGE M12 equipped with a powerful 12V motor, you can easily finish projects like grinding/sanding, carving/engraving, cutting, polishing, drilling, cleaning, etc. 8,000 to 35,000 RPM output makes the rotary tool more prominent. 5-speed gear selection can precisely apply to different situations, making your projects easier and more professional. Cordless design offers the freedom to take it anywhere..
  • Keyless Chuck & Quick Change: M12 is equipped with a keyless 3-jaw chuck, which allows you to change accessories on APEXFORGE Rotary tools quickly and easily without using collets and wrenches. Keyless Chuck is compatible with accessories from 1/64” to 1/8” shank, wider compatible than others. Ideal when the application requires numerous accessory changes. 3-jaw chuck also makes it more stable when holding accessories..
  • Type-C Fast Charging & 2.0Ah Battery: Convenient Type-C fast charging adapter included. It can also be charged by any other adapters with voltage of 13.5V. Meet the needs of charging at any time. 2.0 Ah battery capacity enhances the rotary tool using endurance (up to 60 minutes of idling time).....
Check Stock