Top Cutting Burrs Carbide

TJATSE 5Pcs 1/4 Inch Aluma Cut Carbide Burr Set 4.4 Long Shank Single Cut Tungsten Rotary Burr Files CNC Engraving Cut Metal Carving Polishing Drilling Tool Kits

  • ...This set included 5pcs NF carbide rotary burr, standard aluma cut head with 1/4" shank, 3/8" head diameter, 3/4" flute length, 4.4” total length. NF Carbide Burrs are designed for use on aluminum, non-ferrous metals, soft steel, reinforced plastics and other soft materials..
  • 【SINGLE CUT EDGE DESIGN】:The single cutting edge design provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. Using a double cut burr on aluminum will just gum it up, heat it up, and end up pissing you off..
  • 【EXTENDED LONG SHANK】: In the grinding process, the special extension long handle design is great for hard to reach areas of porting and reduced operator fatigue due to high performance applications..
  • 【ADVANCES TUNSTEN MATERIAL】:100% raw virgin tungsten carbide burrs that the service life is very long, 10 times higher than the durability of other HSS cutter and 200 times more than the small wheel durability. Hardness can reach to HRC70, sharp and sturdy..
  • 【TJATSE BRAND WARRANTY】: Packed with an great tool carry case for safety storage and protection. TJATSE provides an one-year no questions asked replacement warranty and friendly customer service. We aim to provide solutions for ....
Check Stock

uxcell 1/8" Shank 0.8mm x 3mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

Benchmark Abrasives 6” Flame Shape Tungsten Carbide Double Cut Rotary Burr 1/4 Shaft for Metalwork Woodworking Deburring Shaping Carving on Fiberglass Plastic Copper SH-5

  • Benchmark Abrasives carbide burrs with 1/4" shaft is ideal for woodworking, drilling, metal carving, engraving, medium stock removal, deburring, finishing, and cleaning, etc..
  • These carbide burrs are made of tungsten carbide. Double-cut burrs will leave a slightly smoother finish than single-cut due to producing smaller chips as they cut away the material..
  • The double-cut carbide rotary burrs are suitable to use with die grinders and hand-held pneumatic grinders. A double-cut carbide burr is the most popular cut and will see you through most applications..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

uxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

Benchmark Abrasives 6” Oval/Egg Shape Premium Tungsten Carbide Double Cut Rotary Burr 1/4 Shaft for Metalwork Woodworking Deburring Shaping Carving on Fiberglass Plastic Copper SE-5

  • Benchmark Abrasives carbide burrs with 1/4" shaft are ideal for woodworking, drilling, metal carving, engraving, medium stock removal, deburring, finishing, cleaning, etc..
  • These carbide burrs are made of tungsten carbide. Double-cut burrs will leave a slightly smoother finish than single cut due to producing smaller chips as they cut away the material..
  • The double-cut carbide rotary burrs are suitable to use with die grinders and hand-held pneumatic grinders. A double-cut carbide burr is the most popular cut and will see you through most applications..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

uxcell Tungsten Carbide Rotary Files 1/8 Shank Double Cut Ball Shape Rotary Burrs Tool 6mm Dia for Die Grinder Drill Bit Wood Soft Metal Carving Polishing Model Engineering 3pcs

  • Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 6mm(1/4"). Fits most rotary die grinders.
  • Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
  • Double Cut Design: The groove lines are crossed. Double groove rotary files are more suitable for the object density is relatively low, such as wood, plastic, aluminum. With good milling and cutting performance, ensures high work efficiency..
  • Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
  • Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.
Check Stock

20PC Double/Single Cut Carbide Burr Set - 0.118 3mm Shank Rotary Tool Cutting Burrs - Dremel Accessories Fordom Flex Shaft Dewalt And Die Grinders - For Wood Carving Metal Working And Engraving.

  • ✔️ [PREMIUM BURRS DESIGNED IN THE UK] Whether your job implies precision metal work, engineering, tool making, welding, deburring, jewelry making, or you enjoy various DIY arts and crafts or hobbies such as sculpting, TaitaTools carbide burr sets are exactly what you need for premium results!.
  • ✔️ [TOP QUALITY MATERIAL] These rotary tool bits are made with premium carbide tungsten steel, a highly durable material which is guaranteed to withstand the test of time. With a double and single cut tooth angle which prevents chipping, this tungsten carbide bit set is superior to any high speed tungsten carbide burrs..
  • ✔️ [A TOOLBOX MUST] This 20-piece burr set for wood includes everything you need for cutting, shaping, grinding, polishing and removing sharp edges, being compatible with ferrous and non-ferrous metals, wood, plastic and even stone. The kit includes a massive selection of shapes for all types of cuts..
Check Stock

K Kwokker Tungsten Carbide Burr Set 1/8 Shank Diamond Files HRA85 Rotary Tool Accessory Kit, Drill Chucks Accessories for Dremel Rotary Drill Air Die Grinder for Metal Polishing, Wood Carving

  • √ [1/8" Shank 1/4" Cutting Dia Carbide Rotary Burr Set] K Kwokker 10Pcs Carbide Die Grinder Bits. Shank dia: 3mm(1/8"), Cutting dia: 6mm(1/4"), fits dremel tool accessories and most small rotary tools. 10 different types of carving kit drill bits, meet your different needs..
  • √ [Hardness HRA85, Very Well Made And Tough As Nails, Nice Tungsten Carbide] Carbide burr set made of heat-treated durable carbide that lasts long working life, packed with nice plastic case for safety storage and protection..
  • √ [Safe And Efficient, Like a Hot Knife Thru Butter] VERY IMPORTANT: SINGLE-SLOT Tungsten carbide burrs drill bits, BEST FOR: Metal, cast iron, cast steel, carbon steel, alloy steel, stainless steel and so on.
  • GOOD FOR: wood, marble, jade, ceramic, glass etc. NOT FOR: EPOXY. PLEASE USE ROTARY BURR SET ON THE CORRECT MATERIAL TO AVOID DAMAGE TO THE PRODUCT DUE TO INCORRECT USE..
  • √ [This Is a Essential Rotary Burr Set] Grinding head for air die grinder. NOTE: When using the wood carving bits, make sure that the burr handle is fully inserted into the chuck and tightly clamped. Eye masks and gloves are reco....
Check Stock

Yolan 7 1/4” Circular Saw Blade with 36 Teeth, Carbide Tipped, 5/8-Inch Arbor, Diamond Knockout Arbor for TCT Miter Saw Blade, Cutting Metal & Steel

  • Application: It can used in electric circular saw. Cutting all kinds of metal products, channel steel, angle steel, round steel, round pipe, square pipe, iron sheet, rebar, color steel tile, etc..
  • Features: It adopts construction grade cemented carbide teeth to achieve fast cutting, smooth cut without burrs, strong wear resistance and high cutting efficiency..
  • Materials: Using high-quality steel plate and high quality tungsten carbide tip, it is durable and has a long service life..
  • Yolan Service:The purpose of yolan is to maximize service life, durability and speed to achieve burr-free cutting.If you have any questions, please feel free to contact us..
Check Stock

Yosoo Cemented Carbide Engraving Drill Bit End Mill Carving Drill for PCB CNC SMT Rotary Burr 2mm Milling Cutters Set(10pcs)

  • 【Ultrafine Grain Cemented Carbide】：Made from ultra-fine grain cemented carbide material with good milling, cutting performance, ensuring high work efficiency..
  • 【Excellent Performance】：Have sufficient anti-bending strength, wear resistance, high hardness, high wear resistance and high strength..
  • 【Sharp Cutting Edge】：Sharp cutting edges, can be use for milling holes, grooves and edges on plates and the process will be smooth..
  • 【Polished Surface】：Well polished surfaces are quite clean, neat, and there is no glitches or burrs on the shank..
  • 【Engraved Item Materials】：Many items or materials can be engraved such as circuit boards, metal, plastics, stainless steel and copper..
Check Stock

Benchmark Abrasives Cylindrical Shape Premium Double Cut Tungsten Carbide Burr for Metal Wood Welding High-Speed Die Grinders enclosed in Plastic Capsule 1/4 Shank SA-5

  • Benchmark Abrasives SA-5 cylinder shape burrs are great for interior contour work and deburring. Due to the extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel)..
  • These carbide burrs are made of tungsten carbide burr die grinder bits and will start to soften at higher temperatures, so carbide is always the best choice for long-term performance..
  • Double-cut or Crosscut carbide burrs tend to be used on ferrous and non-ferrous metals, soft steel, and also for all non-metal materials such as stone, plastics, hardwood, and ceramic..
  • Efficient carbide burrs are used in various industries like automotive, transportation, woodworking, shipbuilding, construction, welding, foundries, fabrication, etc..
  • All our abrasive products are made with quality materials and exceed ANSI and EU European Standards. We trust in delivering high-quality products to the end-user. Customer satisfaction is the lifeline of our brand..
Check Stock

Deburring External Chamfer Tool, Deburring Chamfering Drill Bit, Bolt Deburring Tool Stainless Steel, Remove Burr Tools Quick Release Hex Shank Fits 1/2″to 1-3/8″ (13mm-35mm)

  • 【Great Design & Material】Zinc Alloy body and Chrome Vanadium Steel hex shank , which has high strength and hardness for durability. Three Alloy cutter blades with strong cutting and repairing capabilities, allows burrs to be removed more cleanly and efficiently..
  • 【Improved Carbide Cutting Edge】Razor sharp, maximum efficiency and durability. This demurring external chamfering tool features carbide cutting edge that provides better performance and longevity than counterparts made of materials such as high speed steel..
  • 【Efficiently Safety Design】The hexagonal shank deburring tool can be tightly connected with the head drill, and it has sharp teeth inside, which can cut bolts safely and effectively, quickly repair damaged bolts and tighten nuts in place, without hurting hands and producing no sparks.
  • 【Operation simply】You can attach a deburring external chamfering tool to the end of a power drill and apply light pressure at the lowest speed to remove the burrs. You don’t need to look for replacement bolts, deburring tools repair damaged bolts and improve work efficiency, A good helper for home tools and factories.
  • 【Optimal Compatibility】Deburring external chamfer tool fits 1/8′ (3mm) to 3/4′ (19mm). Operate with sufficient lubricat....
Check Stock