Top Cutting Diameter
Evolution 10 Inch Multi Material Diamond Blade With Segmented Edge, 7/8 In Bore, Multi-Purpose & Metal Cutting Diamond Blade
- Compatible with the R255DCT Concrete Cutting Saw.
- Multi-material Cutting: One saw & One blade will cut most common building materials including ferrous & non-ferrous metals, reinforced concrete, bricks, tiles, plastics & more saving you time and money.
- 30x Longer Life: Up to 30x longer blade life than abrasive discs when cutting metal Diamond cutting edge is incredibly tough and can make over 1,000 cuts through steel.
- Constant Diameter: Steel blade body with diamond cutting edge maintains its full diameter so you have maximum cutting capacity for the lifetime of the blade.
- Cleaner & Safer: The steel body won’t shatter, unlike abrasives, which can cause serious injury Less dust, less sparks & less odour vs abrasive discs, make this a safer cutting solution.
- Segmented rim design with sub-segmented cutting edge improves efficiency & removes debris from the cut.
Check Stock10 Pack Panlen Cutting Wheel,4-1/2 inch Metal &Stainless Steel Cut-Off Disc,Thin Metal Cutting Disc for Angle Grinder by Panlen (10)
- Premium and Value Materials - Panlen cutting discs are made of aluminum oxide grains that are durable. It also provides aggressive cutting action and longer service life..
- Perfect Size - Outer diameter:4.5inch inside diameter:7/8 inch,045" quality thin, operating up 13,000 RPM and 80M/S. optimized for 4.5”angle grinders..
- Multiple Applications - Tough abrasive cutting discs are perfect for super-fast, clean cutting in carbon steel, stainless steel, pipe, iron, copper and all other ferrous metals..
- Precise and Efficient Cutting - Design for fast burr free cutting with minimal material loss, make cutting project more precise and efficient..
Check StockGenmitsu 40pcs End Mills CNC Router Bits, 1/8\ Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose End Mill, Nano Blue Coat & Titanium Coat CNC Bits, MC40A
- ...hining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
- 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm..
- Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating..
- Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
- Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..
Check StockGEDORE 224011 Ratchet Pipe Cutter NIRO Size 1
- Easy handling via ratchet feed with automatic indeed of the cutting wheel with every rotation.
- Body in zinc-plated pressure-cast aluminium.
- For pipes 16 - 35mm Diameter (size 1) or 25 - 66mm Diameter (size 2).
- Cutting wheel made from high-alloy stainless steel, with high service life.
Check StockNEW ARCHERY PRODUCTS Spitfire Double Cross 4-Blade 100 Grain Durable Precise Bow Hunting Mechanical Broadhead - 3 Pack
- HIGH-PERFORMANCE - The NAP Spitfire Double Cross 4-blade mechanical broadhead for bow hunting delivers reliable accuracy and trauma.
- This is a good choice for avid archers who are searching for great efficiency.
- DOUBLE CROSS - The Spitfire DoubleCross integrates four, no-fail blades.
- The front deploying "stage one" main blades boast a massive 2" cutting diameter while the rear deploying "stage two" 'bleeder' blades feature a 1.125" cutting diameter.
- ULTIMATE EFFICIENCY - Due to the two-stage blade deployment, the DoubleCross cuts vertically and horizontally, regardless of the angle of impact, delivering better entrance and exit wound channels and dramatically increased blood trails.
- SPRING CLIP TECHNOLOGY - This NAP broadhead ensures your blades will stay closed in your quiver and in flight without the need for any rubber bands or o-rings.
- It quickly expands to a 2-inch main cutting diameter and 1.125" secondary cutting diameter on impact.
- FEATURES - Legendary Trophy Tip point of the NAP broadhead is designed for maximum bone-splitting power and unbelievable durability to ensure that the Spitfire will stand up under the toughest conditions.
Check StockOKVEQUIP 3PCS 4Inch Super Thin Diamond Saw Blade Dry or Wet Tile Ceramic Disc Wheel Porcelain Cutting Discs for Marble Quartz Granite
- 【Tile Blade Widely Use】: Ceramic tile blade cutting discs can cut porcelain, vitrified tiles, ceramic tiles and thinner granite, marble, etc. quickly and accurately..
- 【Features】: Diamond tile blade fast cutting, small kerf, low power consumption, sharp and wear-resistant,using hot pressing sintering process, can be used for a long time.
- 【Applicable type】:Concrete cutting machine saw blade can be used for dry/wet cutting.
- 【Adapted machine】: Cutting marble granite porcelain tile can be used with marble machine, desktop cutting machine, angle grinder.
- 【Ceramic cutting disc wheel parameters】: size 105x20x10MM, outer diameter 105MM, inner diameter 20MM, with washer to change 16MM, thickness 1.2MM, RPM2000-8000.
Check StockMuzzy Broadheads Hb Ti/Broadhead Titanium, One Size, Three Pack (297-TI)
- COMPACT AND AERODYNAMIC - Flies as true as a field point prior to expansion but unleashes total cutting surfaces of 2 5/8-inches for complete devastation upon impact.
- 100 GRAIN BROADHEAD - 4 Blade Broadhead with chisel tip has . 050" thick fixed blade and . 039" thick mechanical blade to maximize damage.
- STREAMLINED TITANIUM FERRULE - With Stainless Steel Fixed Blade Retention Color.
- CUTTING POWER - 1 inch fixed blade cutting diameter, 1-5/8 inch expandable cutting diameter.
- THREE PER PACK - Replacement blades not included, but are available: SKU 397-TI.
Check StockM MOKENEYE 155mm/6.1 inch Hole Saw Bi-Metal Wood Hole Saw Drilling Tool for Cutting Board Metal, Plastic, Fiberboard, Wood
- 【HIGH-QUALITY MATERIAL】- The 155mm/6.1 inch hole saw is made of M42 bimetal, with hardness up to 65HRC, with higher toughness, stronger wear resistance and higher performance cutting strength..
- 【PRODUCT SIZE】- Cutting Diameter: 6.1".
- 【WIDE APPLICATION】- This hole saw blade is perfect for installing locks, knobs in doors and cabinets or drilling larger, diameter holes through desks or bench, air ducts, ceiling lights, speakers and more..
- 【FAST & SMOOTH CUTTING】- The sharp tooth edge design makes the cutting smooth and fast. The spring on the drill is very good because it automatically pushes the disc out of the saw after completing the hole..
- 【LIFETIME GUARANTEE】- M MOKENEYE aims to ensure the highest customer satisfaction and the greatest efficiency of our products. If you have any question, please contact us, we will try our best to meet your demand..
Check StockNEW ARCHERY PRODUCTS Spitfire Double Cross 4-Blade 100 Grain Durable Precise Mechanical Broadhead for Crossbow - 3 Pack
- HIGH-PERFORMANCE - The NAP Spitfire Double Cross 4-blade mechanical broadhead for crossbow hunting delivers reliable accuracy and trauma.
- This is a good choice for avid archers who are searching for great efficiency.
- DOUBLE CROSS - The Spitfire DoubleCross integrates four, no-fail blades.
- The front deploying "stage one" main blades boast a massive 2" cutting diameter while the rear deploying "stage two" 'bleeder' blades feature a 1.125" cutting diameter.
- ULTIMATE EFFICIENCY - Due to the two-stage blade deployment, the DoubleCross for crossbow cuts vertically and horizontally, regardless of the angle of impact, delivering better entrance and exit wound channels and dramatically increased blood trails.
- SPRING CLIP TECHNOLOGY - This NAP broadhead ensures your blades will stay closed in your quiver and in flight without the need for any rubber bands or o-rings.
- It quickly expands to a 2-inch main cutting diameter and 1.125" secondary cutting diameter on impact.
- FEATURES - Legendary Trophy Tip point of the NAP broadhead for crossbow is designed for maximum bone-splitting power and unbelievable durability to ensure that the Spitfire will stand up under the toughest conditions.
Check Stock50 Pack Cut-Off Wheels 4 1/2 inch Thin Metal & Stainless Steel Cutting Wheel Professional Fast Cutting Disc for Angle Grinder
- 【50 PACK】This is for a pack of 50 pieces of our cutting wheels.Outer diameter:4.5inch inside diameter:7/8 inch, operating up to 13,300 RPM. optimized for 4.5"angle grinders..
- 【MATERIAL】Proprietary aluminum oxide grain for long life and fast cutting.double fiberglass mesh reinforced for further safety and durability..
- 【PERFORMANCE】Thin 0.045" cutting wheel design for fast burr free cutting. Perfectly compatible with all 4 1/2 inch angle grinders with 7/8-inch arbor, operating up to 13,300 RPM and 80M/S..
- 【APPLICATION】Tough abrasive cutting discs are perfect for super-fast, clean cutting in carbon steel, stainless steel, pipe, iron, copper and other ferrous metals..
- 【SAFETY TIPS】Please use all necessary protective gear when you use these cutting discs..
Check StockMasonry Blade 12 Inch, Dry or Wet timeriver Diamond Saw Blades 12 Inch, Hot Pressing Process, High Durability, 12 Concrete Saw Blade, Retaining Wall, Granite, Marble, Concrete.…
- Compatible with the R300DCT Concrete Cutting Saw and the R300DCT+ Concrete Cutting Saw.
- Multi-material Cutting: One saw & One blade will cut most common building materials including ferrous & non-ferrous metals, reinforced concrete, bricks, tiles, plastics & more saving you time and money.
- 30x Longer Life: Up to 30x longer blade life than abrasive discs when cutting metal Diamond cutting edge is incredibly tough and can make over 1,000 cuts through steel.
- Constant Diameter: Steel blade body with diamond cutting edge maintains its full diameter so you have maximum cutting capacity for the lifetime of the blade.
- Cleaner & Safer: The steel body won’t shatter, unlike abrasives, which can cause serious injury Less dust, less sparks & less odour vs abrasive discs, make this a safer cutting solution.
- Segmented rim design with sub-segmented cutting edge improves efficiency & removes debris from the cut.
Check StockDynabrade 52420 3-Inch 7-Degree Offset Cut-Off Wheel Tool
- Cut-Off Wheel Tool, for efficient cutting of sheet metal, frame rails, clamps, bolts, etc.
- 3-Inch Diameter, 7 Degrees Offset, 5 hp, 20,000 RPM, Front Exhaust.
- Accepts optional 3-Inch diameter Type 1 Cut-Off Wheels.
- Cut-off Wheel Tool, For Efficient Cutting Of Sheet Metal.
- 3-inch Diameter, 7 Degrees Offset, 5 Hip.
- Accepts Optional 3-inch Diameter Type 1 Cut-off Wheels.
Check Stock