Top Cutting Force

ele ELEOPTION Electric Cutter for 3.5"x2" Card, Automatic Business Card Cutter Binding Machine-110V

  • The desktop CR80 all metal manual PVC card die cutter, cutting size is 2-1/8"x3-3/8" (86×54mm) Standard CR80 (ID-1) with rounded corners. Cutter life-span is more than 100,000 times and cutting thickness is less than 0.03inch(0.8mm). It is a great tool for both professional and occasional users..
  • Long arm handle allow powerful cutting with ease. All heavy-duty metal base, steel blade with excellent edge, long arm of force power-saving Handle..
  • Blade gap is 0.0003-0.0006inch (0.008-0.015mm), round four corners of the card at one time. Easy and accurate positioning and cut neatly..
  • The business card cutter is designed with hardened steel cutting die, die-cast steel base and long arm of force power-saving design handle, which can help you cut out more easily than other die cutters..
  • With this all metal Card Round Corner machine, you can cut the business cards, credit cards, membership cards, driver's license cards, PVC ID cards and wallet size photos..
Check Stock

WISEPRO 4.2 Inch Mini End Cutting Pliers, Precision End Nippers, Nail Puller Tool for for Zipper Install Stops Repair

  • End Cutting Pliers: The almost flat blade head of the mini end cutting pliers allows you cut close against the surface. Precision cutting with clean edge. Widely used to cutting wire, guitar string, zip, and so on. It can also help pulling nails..
  • High Leverage Designed: The mini pliers are designed with labor saving concept. High leverage joint design for greater cut force. Powerful gripping require less force when using the pliers..
  • Spring Loaded: Each mini pliers are loaded with two leaf springs, allowing the pliers to stay open and work directly. save labor and easy to work in tight areas..
  • Lightweight: The mini pliers are very light in mass and easy to carry and handle, the soft TPR/PP grips fit well in hands, the handle is non-slip and at the same time help better control..
  • Premium Material: All the mini pliers are construct 47# carbon steel, high-frequency quenching, final nickel plating on the surface of the pliers, protect the precision pliers from rust and corrosion, build to last..
Check Stock

KUNHEWUHUA 2-1/4" 58mm Graphic Punch Die Cutter Badge Button Maker for 2-1/4" 58mm Badge

  • 1. All heavy-duty metal base, steel blade with excellent edge, long Arm of Force Power-saving Handle..
  • 2. Cutter life-span: ≥ 1,000,000 times.
  • blade gap: 0.0003"-0.0006" (0.008-0.015mm)..
  • 4. We have various dimension cutter machine, Round 25mm/32mm/37mm/44mm/50mm/56mm/58mm/75mm, Oval 25mm/35mm/45mm/55mm/70mm, Square 35mm/55mm,if you need other size,please make note or contact with us. Thanks..
  • 5. The machine is designed with hardened steel cutting die, die-cast steel base and long arm of force power-saving design handle, which can help you cut out more easily than other cutters..
Check Stock

3'/75mm Graphic Punch Die Cutter Heavy-Duty Badge Button Maker Circle Cutter for 75mm Badge, Leather, Cloth

  • 1. All heavy-duty metal base, steel blade with excellent edge, long Arm of Force Power-saving Handle..
  • 2. Cutter life-span: ≥ 1,000,000 times.
  • blade gap: 0.0003"-0.0006" (0.008-0.015mm)..
  • 4. We have various dimension cutter machine, Round 25mm/32mm/37mm/44mm/50mm/56mm/58mm/75mm, Oval 25mm/35mm/45mm/55mm/70mm, Square 35mm/55mm,if you need other size,please contact with us. Thanks..
  • 5. The machine is designed with hardened steel cutting die, die-cast steel base and long arm of force power-saving design handle, which can help you cut out more easily than other cutters..
Check Stock

CGOLDENWALL Manual Ribs Meat Chopper Slicer Stainless Steel Small Bone Meat Cutter Beef Mutton Household Vegetable Food Slicer Slicing Machine for Home Cooking

  • FOOD-GRADE STAINLESS STEEL THICK BLADE--Forged and polished with 4Cr13 steel at high temperature, the blade is sharp and duable, making cutting much more powerful. This meat cutter can be washed in water and mild detergent directly with its rust-proof material. Tips: before cutting, you can sharpen the blade, please place the hard ingredients near the cutter head and cut with an instant force!.
  • FREELY ADJUST THE SLICE THICKNESS--2 sizes of screws are included in the package for adjusting the cutting thickness. Long screws for cutting the thicness of 0-57mm, and the short screws for 0-8mm. Whether you want very thin potato chips or thick corn cubes, our cutting machine can satisfy you well. BUT it is not recommended to slice cylindrical frozen meat rolls, no baffle to fix very hard frozen meat that is easy to slide! ( KD0288 Meat Cutter can cut frozen meat roll(B0822JBL4Y)).
  • ALMOST SUB FOR YOUR BROAD--Our meat slicer can cut whole chicken, meat with SMALL ribs or bones. For raw meat, direct cutting may cause adhesion, please understand, because almost ordinary kitchen knives will have this situation.
  • so you could freeze the meat for A LITTLE WHILE before cutting.
  • but freezing can't for too long to avoid it becoming too hard and slippery. Something NOT s....
Check Stock

DMI Steak Knife, Rocker Knife, Curved Knife, Verti Grip Kitchen and Dinner Steak Knife for Ease of Chopping or Limited Hand Strength, Dishwasher Safe, Stainless Steel Blade

  • STEAK KNIFE CUTS EASILY THROUGH MOST FOODS with an effortless rocking motion. Cutting cake, vegetables or meat is quick and easy with minimal motion and smooth downward force. Specially designed for individuals with limited hand mobility.
  • ROCKER KNIFE ERGONOMIC VERTICAL GRIP DESIGN PROVIDES EXCEPTIONAL CONTROL while increasing downward cutting force and limiting hand slippage.
  • CURVED KNIFE features a STAINLESS STEEL BLADE with an included snap on cover for safety.
  • DINNER KNIFE is the perfect one handed gadget to use as adaptive equipment for those with limited dexterity or arthritis.
  • CUTTING KNIFE measures 6.5 x 2.25 x 0.5 inches and is dishwasher safe for easy cleaning.
Check Stock

Fiskars 3-in-1 Corner/Border Punch, Lace 117290-1001) Orange

  • Ratchet design compounds force with a series of easy squeezes for maximum cutting power with very little effort.
  • Fully hardened, precision-ground steel blade stays sharp, even through heavy use.
  • Maximum cutting capacity: 2 inch diameter.
Check Stock

CRAFTSMAN Linesman Pliers, 8-Inch Compound Action (CMHT81717)

  • INCREASED CUTTING FORCE: Linesman pliers have compound action design.
  • COMFORT AND CONTROL: Multi-zone bi-material grips on cutting pliers.
  • INDUCTION HARDENED: Cutting edges of CRAFTSMAN pliers stay sharper longer.
  • STRENGTH AND DURABILITY: Made from drop forged steel.
Check Stock

Fiskars Ratchet Drive Anvil Lopper

  • Ratchet design compounds force with a series of easy squeezes for maximum cutting power with very little effort.
  • Fully hardened, precision-ground steel blade stays sharp, even through heavy use.
  • Maximum cutting capacity: 2 inch diameter.
Check Stock

CRAFTSMAN Diagonal Cutting Pliers, 8-Inch Compound Action (CMHT81718)

  • INCREASED CUTTING FORCE: Compound action design of diagonal cutting pliers.
  • COMFORT AND CONTROL: Multi-zone bi-material grips on safety wire pliers.
  • INDUCTION HARDENED: Cutting edges of CRAFTSMAN pliers stay sharper longer.
  • STRENGTH AND DURABILITY: Made from drop forged steel.
Check Stock

Bates- Bolt Cutter, 14\

  • Bates bolt cutter is made of high-quality T8A steel, which has high hardness and excellent cutting performance. It is not easy to break or deform. The blade can be used for a long time..
  • The ergonomic handles with anti-slip soft grips provide extra comfort when cutting, reducing pressure on your hands while offering an improved hold for crisp and controlled cutting..
  • Bates bolt cutter has a cutting capacity of HRC≤42:7/32-inch.
  • HRC003c25:1/4-inch, making it perfect for cutting through bolts, chains, and other metals..
  • The classic lever-fulcrum design and precisely aligned blades deliver added leverage with less effort, magnify the force applied to handles, which are combined with hinges, and transfer power to the jaw and cutting blades, which can easily cut through hard objects..
  • Bates bolt cutter can tackle a variety of cutting tasks, suitable for cutting chains, nets, wires, poles, screws, and other metal materials. The bolt cutter is widely used in industrial job sites or home improvement projects, repair jobs and more..
Check Stock

Xcelite 1178MN SHEARCUTTER,MICRO

  • Shearcutter flush cutting tools require less than half the operator force of most wire and lead cutting tools and transmit proportionately less shock to the component.
  • Flush cutting for precise tip cutting and delicate applications which require minimal shock transmittal and wire tip.
  • Flush cut soft wire up to 14 AWG (1.6mm). Not recommended for hard metals or plastic materials..
  • Complies with MIL-STD-2000, DOD-STD-2000, and WS-6356E standards.
  • Grips are molded of wide, shock-absorbing material for operator comfort.
  • ESD Safe reduces the possibility of a charge build up which can cause failure or damage to components/products.
Check Stock