Top Cutting Inserts

YG-1 P03103 Spade Drill Taper Shank Holder, Straight Flute, 45/64\-15/16\ Drill Insert Range

  • ☞Material : Inserts adopt high quality carbide substrate and Balzas coating. Holders adopt high quality imported 40Cr steel. Durable for long time using..
  • ☞Feature of Inserts: Good versatility with high precision, high finish and high wear resistance. Not easy to stick to the holders or workpieces. Vacuum hardening, exquisite craftsmanship, easy cutting..
  • ☞Feature of Cutting holder : Strong steel as material, laser lettering on holder. Anti-rust oil wiped on holders to prevent from oxidation. Plastic box packing ,easier to store..
  • ☞Insert Application: Suitable for hard steel and stainless steel parts processing.Inserts with Nano coating endow them strong impact resistance, good versatility with high precision, high finish and high wear resistance..
  • ☞Package includes: 1PC× MGEHR1212-3 + 1PC× MGMN300-M Colorful coating carbide insert + L Wrenches..
Check Stock

Westmark Potato Chipper and Produce Slicer with Three Stainless Steel Cutting Inserts and indentors, Easy Stix, White/Anthracite, 11802260

  • Westmark Potato and Vegatable Chipper/Slicer, White.
  • Potato cutter with 3 blade inserts for fresh-sliced potatoes, Ideal for delicious chips/fries, Slice vegetable and fruit sticks for salads, crudités and other creations.
  • Effortless and fast preparation of uniform chips and vegetable sticks in 3 different thicknesses thanks to 3 exchangeable and sharp stainless steel cutting inserts (12x12, 10x10, 9x9 mm), Matching sliding indentor stamps made of high-quality plastic.
  • Working safely: Suction base for firm grip on smooth surfaces, Ergonomic plastic lever handle for easy and effortless handling.
  • To preserve durability: Always use the matching punches and cutting inserts, Hand wash recommended to preserve blade sharpness.
Check Stock

Accusize Industrial Tools 1'' by 12'' Rh Sclcr Indexable Boring Bar Plus 10 Pc Ccmt32.5 Carbide Black and Yellow Inserts, Cvd Coating, P252-S408ins

  • Shank Diameter: 1". Overall Length: 12". Using 80 degree carbide CCMT inserts negative 5 degree end and side cutting angle.
  • Boring from light roughing to finishing in small bores. Insert CCMT 32.51 or CCMT32.52 Included & Key Included..
  • Accepts Inserts CCMT 32.51 or CCMT32.52. S16T-SCLCR4. Profiling bar for semi-finishing and finishing operations.
  • Bar hardness approximately 45HRC. Extreme fine gloss finish.
  • Negative 5 degree end & side cutting angle. Positive 80 degree diamond CCMT inserts.
Check Stock

Turning Insert Holder SVVCN 1212H 11, with 1PCS Insert VBMT 221 (VBMT110304), Square Shank, Steel, External, Screw Clamp, Neutral, 12mm Width x 12mm Height Shank, 100mm Length.

  • ★Packing : 1pcs MTJNR5/8" , 1pcs MWLNR5/8" ,1pcs MCLNR5/8" ,1pcs SER5/8" turning holder , 4pcs carbide turning inserts and 3pcs wrenches..
  • ★ASZLBYM lathe tool holder set : Shank size: 5/8" inch x 5/8" inch.
  • Overall Length: 4"inch, cutting direction:right cutting..
  • ★Turning holders : turning holder are made of high quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning holder , for long time use..
  • ★Turning inserts : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ★The holders are packed in a premuim aluminium carrying case,easy to carry..
Check Stock

Accusize Industrial Tools 3/4'' Shank 7 Pc Indexable Carbide Turning Tool Set with 10 Extra Carbide Inserts in Fitted Box, 2387-2006plus

  • Shank Size (H x W): 3/4" x 3/4". Overall Length: 4-1/2". Insert screw and wrench included.
  • Including 2 of MGMN300, 16ER, WCMT32.5, CCMT32.5, DCMT32.5 Carbide Inserts.
  • Black oxided smooth finish on each turning tool holder style and shank size..
  • Each tool holder comes with a C6 TiN coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Including: 7 pcs indexable turning tool holder.
  • The cutting-off tool can only do cut off jobs. In regard to the other regular cutting, it's better to use the other 6 pieces of the set..
Check Stock

OSCARBIDE Indexable End Mill R8 Shank,1''Cutting Diameter,5-9/16\Overall Length,2 Flute with 2 Pieces TPCN1103PDTR(TPCN22PDTR) Carbide Inserts

  • Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
  • Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
  • When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
  • Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
  • Used for slotting and peripheral milling.
Check Stock

Prettywell Bra Pads Inserts, 2 Pairs Latex Bras Inserts for Sports Bras, Bra Cups Inserts for Bikini Tops (beige, S)

  • Latex bra pads inserts:our bra pads for women are made of latex,with breathable holes, our bra cups inserts are very breathable and soft, and our bra pads have a great resilience,can shape your chest very well and offer a cozy feeling at the same time.
  • Our bra pads inserts are easy to use:the lightweight bra inserts are very thin and soft, easy to put it in or out! The protruding moon shape on the bottom can help to support.
  • Widely used bra pads: Bra Inserts pads are perfect as sports bra pads inserts,swimsuit padding inserts,mastectomy bra inserts, and for evening gowns, wedding dresses, sweaters & casual wear,and just about any top that could use a triangular shaped insert.
  • Smart bra cup inserts:our bra pads can be easily cut to the size you want, there are no rough edge after cutting.And 3 size are avaliable,suitable for cup size A,B,C,D.
  • What you get: bra pads inserts*2 pairs,Prettywell guarantee customer service. Prettywell bra pads inserts: 3 months warranty for free replacement.7/24 service for our valued customer as a satisfactory result.Any questions, please feel free to contact us.We greatly pleasure in helping you at any time.
Check Stock

Accusize Industrial Tools 3/8'' by 4.33'' Right-Hand Sclcr Coolant Through Indexable Boring Bar with Ccmt Insert 21.51, 2800-0035

  • General purpose boring bar fitted with rhomboidal positive inserts (80°angle) which are free cutting with strong cutting edges..
  • The coolant hole with a diameter range varying between 3/32" and 5/32" in accordance to the bar size allows to cool the cutting edge and remove chips..
  • The inserts is set with a 0° rake angle and an inclination angle shown in the table below..
  • Made of tool steel with nitrogen superficial treatment, Hardness 60 HRC, blackening by PVD coating, thickness 0.0002"..
  • Extreme gloss finish, Bar hardness approximately 45HRC.
Check Stock

GBJ 10pcs MGMN200-G/2mm Black Carbide Grooving Inserts 2mm Wide Grooving Carbide Inserts Lathe Cutter for MGEHR/MGIVR Lathe Grooving Cut-Off Tool

  • Model : MGMN200-G, MGMN300-M, MGMN400-M ,grooving width: 3mm.
  • Type: Grooving cut-off inserts, used on MGEHR/MGIVR grooving cutting tool.
  • PVD Coating：Suitable for Steel and Stainless steel parts processing. Coating endows inserts strong impact resistance, good versatility with high precision, high finish and high wear resistance..
  • Advantage: Wear-resistant and heat-resistant, not easy to stick to the holders or workpieces or break up.Vacuum hardening, exquisite craftsmanship, easy cutting..
  • Package: 10pcs (Boxed) MGMN200-G Grooving Cut-off inserts.
Check Stock

Accusize Industrial Tools 2'' by 3/4'' 90 Deg Square Shoulder Indexable Face Mill with 5 Pcs Apkt1604 Carbide Inserts, 4508-0012

  • 90Degree cutting angle. Radial rake angle: -10Degree. Axial rake angle: +7Degree..
  • Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth.
  • Cutting Diameter: 2". Arbor Hole d: 3/4"..
  • No. of Inserts: 5. Screw: M4 x 8.4. Inserts: APKT1604.
Check Stock

Indexable Lathe Turning Tool,1/2'' Shank 7 Pieces Carbide Turning Tool Set,Metal Lathe Tools Holder for Turning Grooving Threading with Tin Coated Carbide Inserts Turning insert

  • 1.Package include: 7pcs Holders with inserts (Installed,as the pictures show),Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.Insert screw and wrench included.
  • 2.The holders made of quality cemented carbide and tungsten steel（40CrMo）, HRC up and down 48 degrees ， high hardness,Offer long life and faster cutting speed.
  • 3.The inserts: carbide material with CVD coating ,used for machining stainless steel and steel,Used for turning and finishing on a wide range of materials，the blade is sturdy, low friction coefficient, wear-proof and stable，Good wear resistance, sharp and durable ,smoothing cutting.
  • 4. 7pcs different angles can cut out any model you want with high precision，S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand，S12M-SCLCL06 is left hand , the dimensions as the same as the right hand, other 5pcs holders is 3.9inches/100mm, and the shank diameter is 1/2.
Check Stock

ASZLBYM S06K/S07K/S08K/S10K/S12M-SCLCR06 Lathe Indexable Internal Boring Bar Set Lathe Turning Tools Holder Set with CCMT21.51/CCMT060204 Carbide Indexable Boring Turning Inserts + 5pcs T8 Wrench

  • ♥PACKAGE INCLUDES : 5pcs lathe turning tools (S12M-SCLCR06 + S10K-SCLCR06 + S08K-SCLCR06 + S07K-SCLCR06 + S06K-SCLCR06 )+ 5PCS CCMT21.51( = ISO CCMT060204 ) carbide inserts + 5PCS T8 wrench , Comes with individual package, packed in Plastic box with Size mark on the box..
  • ♥5PCS BORING BAR : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
  • ♥Lead cutting angle: 95 Degree, cutting direction: right hand, turning insert: CCMT21.51( = ISO CCMT060204 ), clear mark on the wrench, easy to identify bar holder..
  • ♥ 5PCS CCMT21.51 INDEXABLE INSERTS : inserts are made of carbide and the coating material is Multilayer ,the Inserts can be used for finishing or semi-finishing stainless steel and cast iron..
  • ♥ADVANTAGE : the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability .If you need more CCMT21.51/CCMT060204,you can search for ASIN: B09495PCR6.
Check Stock