Top Cutting Machine Air Plasma

LOTOS LT5000D 50A Air Inverter Plasma Cutter Dual Voltage 110/220VAC 1/2\ Clean Cut

  • ★ AIR PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
  • ★ OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC)★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz)..
  • ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website..
  • ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LT5000D Plasma Cutter are "LCS22" or "LCS33". Please search "Lotos LCS22" or "Lotos LCS33".
  • ★ It CANNOT compatible with Lotos LCOn20, LCON40 or LCON90 Consumables Sets or any other third part consumables set. ★ PACKAGE INCLUDES: Power supply, Plasma cutting torch, ground clamp, Pr....
Check Stock

Pilot Arc Plasma Cutter 50A Dual Voltage 110/220V Non-Touch Plasma Cutter Cutting Machine Air Inverter DC 1/2 Inch 12mm Clean Cut With Upgrade P80 Cutting Torch Plasma Cutting Equipment

  • Pilot Arc Non-touch Plasma Cutter Machine: The pilot arc cutting machine can effectively cut through rough, painted, and rusted surfaces and produce the least slag. The pilot arc technology allows you to cut without touching the metal. So it provides a better cutting quality and longer life for consumables..
  • Upgrade IGBT Technology: IGBT transistor produces a uniform output to enable cutting of thin metal and can reach high power output for cutting thick metal. At the same time, it can effectively save energy and improve the life of the machine..
  • 50Amp Dual Voltage 110/220V Machine: Output Current [email protected].
  • [email protected] and effective cutting thickness: 1/2 Inch (12mm).
  • Automatic Dual Voltage / Dual Frequency (110/220V 50/60Hz).
  • Dimensions: 15.7" X 10.2" X 13.4" (40*26*34 CM).
  • Wide Application: The plasma cutter CUT50P suitable for cut aluminum, stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials. Designed for both demanding industrial and construction work, or home and hobby use..
Check Stock

Reboot Plasma Cutter Machine 50Amp Plasma Cutting Equipment CUT50D 3/5'' Cut 110/220V High Frequency 1/2'' Clean Cut,IGBT Air Plasma Cutting Machine for Aluminum Alloy Mild Steel Cast Iron

  • [Widely Application and Low Cost] 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation.this Plasma Cutter available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • widely used for automotive, ducting work, repair/maintenance,metal processing,manufacture.
  • [SEE WHAT OUR CUSTOMER SAYS] I tried it on 120v with the air pressure turned way down on a piece of 1/8 angle iron the pilot arc worked as it should and it went through it like it wasn't even there. Next thing I tried it on was some roughly 3/8 wall tubing I needed to cut and notch for the safety cage on my figure 8 car..
  • [Generator Supported] This Plasma Cutting machine works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V,50A breaker for 110V.
  • [Blowing Back] Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and consumables.[110/220V Input ]Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
  • [Warranty] Buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance.
Check Stock

Plasma Cutter Welder Combo Pulse TIG Welder Stick Welder 3 in 1 Welding Machine, 50A Plasma Cutting, 200A TIG Welding (Pulse), Arc/MMA Welder More Stable Arc Dual Voltage 110V/220V 520TSCPF

  • ✅【Plasma Cutter】10-50Amp DC current output. The cutting machine offers a variety of welding and cutting abilities.
  • Compact plasma cutter has a Handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
  • ✅【 Pulse TIG Welder】10-200AMP DC TIG electric current output.
  • The newly added PULSE function makes the welding shape more beautiful and improvers tungsten life. Quality TIG welding on stainless or steel and precise welding of thinner-gauge materials. Easy work with foot-pedal (it is not included in standard accessories). Please make tungsten head sharp before using TIG welder, can get better welding in this way..
  • ✅【STICK/MMA/ARC Welder】Output current 10-180Amps, Hot arc starting, Anti-Stick, Deep welding pool and nice welding surface and few spark. Suitable for welding different acid and basic welding rod size from #1.6mm to #4.0mm..
  • ✅【Multiple Uses 】The welding machine suitable for weld stainless steel, alloy steel, carbon steel and nonferrous metals.
  • ideal for a welding enthusiast or hobbyist with....
Check Stock

SPRIGHOLLY plasma cutter 50A Dual Voltage 110V/220V Compact Metal Cutter 1/2\ Quality cut plasma cutting equipment high frequency CUT50 3 year warranty black IGBT Inverter machine

  • 【OUTPUT & PERFORMANCE】 At 220V, 10-50A DC output, clean cut 1/2" and maximum cut 3/4".
  • at 110V, 10-50A DC output, 1/3" ideal clean cut and maximum cut 2/5". ( Please note: the thickness of the cut depends on the material).
  • 【Fast cutting in only three steps】Built-in automatic drain air regulator, you only need to connect the air compressor, plug in the power supply and the plasma cutting torch, and you can start working. And there is no need to worry about drainage and regulating gas.Very convenient！.
  • 【Energy Saving & Multi-protection】 The cutting machine adopts IGBT inverter technology, which features with current control, high quality and stable performance, so the energy consumption is also greatly reduced. With the protection of the electric circuit against over currents, over voltages and low voltages, the cutting welder works in a more safer and professional way..
  • 【Easy Cut】Equipped with advanced AG60 torch to reduce loss and extend service life. With your SPRIGHOLLY Plasma Cutter, you can cut stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials without breaking a sweat,and produces minimal slag. Designed for both demanding industrial and construction work, or home and hobby use. Our high-quality Pl....
Check Stock

SUPER DEAL DC Inverter Plasma Cutter Cutting Machine With Screen Display Dual Voltage 110/220V AC 1/2'' Clean Cut (CUT 50)

  • 【Superior performance】This plasma cutter features PRO technology, more stable performance. High duty cycle result in less power consumption. More economical and effcient than the traditional cutting machine due to the high speed, high temperature and high energy plasma draught..
  • 【Exquisite workmanship】 Made of heavy duty iron. Its solid material construction makes it reliable and gives it strength that can be used for a long time. It not only can be used in businesses and DIY users, but also fully accommodating the demands of professional operators..
  • 【Digital Display】DC output Digital LCD Display, Easy Read Front Panel Air-Pressure Guage, save energy and no noise, High cutting speed, Cutting smoothly and no polish demands..
  • 【Considerable & Safe design】Built-in over-heat protection, over-voltage protection, under voltage protection and over heat protection. Comes with wire and mask, which can prevent you from hurting while using..
  • 【Wide range of applications】Suitable for a wide range of applications including sheet metal fabrication, light industrial use, site work, automotive, ducting work, repair and maintenance services. The cutting machine not only use in businesses and DIY users but also fully accommodating the demands of profes....
Check Stock

Reboot Plasma Cutter 45 Amp IGBT Inverter RBC4500 AC 220V Air Plasma Cutting 1/2 Clean Cut 15MM Max Cutting High-Frequency Duty Cycle for Aluminum Stainless Mild Steel Copper Iron

  • [Cutting Thickness] Plasma Cutter 20-45A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V,air pressure 60PSI....
  • [Blowing Back] Plasma cutting Torch Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and....
  • [Generator Supported] this plasma cutter 45amp works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V.
  • [Wildely Application and Low Cost] this plasma cutter available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • [Warranty] buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local....
Check Stock

PrimeWeld Pilot Arc 50A Plasma Cutter 200A TIG/Stick Welder Combo Multipurpose Welding Machine for Home or Jobsite Use with 1/2-inch Clean Cut Plasma Cutter TIG Welder and Stick Welder CT520DP

  • 3-IN-1 PLASMA CUTTER/WELDER COMBO: Combines plasma cutting, TIG/stick welding and Pilot Arc welding functions in one convenient and versatile unit.....
  • TIG WELDER PLASMA CUTTER COMBO: Multipurpose welding machine can cut all types of metals up to 1/2-foot thick with the 50-Amp plasma cutting function.....
  • PORTABLE ARC PLASMA CUTTER: At only 32 lbs., it's ideal for home or jobsite use. Has a 60% duty cycle at max amps for all functions, AC 110/220±15%.
  • VERSATILE WELDING, CUTTING MACHINE: Cuts many metals including stainless steel, aluminum, titanium, cobalt, nickel alloys and cast iron. Includes....
  • GREAT CUSTOMER SERVICE: Backed by a 3-year warranty, we're committed to after-sales service. When you contact us, you speak with real technical....
Check Stock

50Amp Plasma Cutter Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110/220V CUT55P 50A Plasma Cutting Equipment, DC Inverter Portable Plasma Cutter Machine, IGBT Digital Display 1/2 Inch Clean Cut

  • Pilot arc: our cut55p is pilot arc plasma cutter machine and equipment the P-80 plasma cutting torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag.
  • Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life..
  • Outstanding cutting performance: the DC inverter cutting machine suitable for cut stainless steel, alloy steel, mild steel, copper, and aluminum. Designed for both demanding DIY and outdoor work, or home and hobby use..
  • Equipped with IGBT technology: IGBT transistor produces a uniform output to enable cutting of thin metal and can reach high power output for cutting thick metal. IGBT machine is far superior and more stable than the MOSFET machine. Can effectively save 30% of energy..
  • 12mm Cutting thickness: Ideal cut thickness 1/2" (12mm), automatic dual voltage / dual frequency (110V/220V 50/60Hz). Voltage compensation to tackle with +/-15% electricity fluctuation. In addition our machines provide plugs that require manual installation..
  • What you get: cut55p x1, p80 plasma torch & accessories, user guide, 12 month guarantee..
Check Stock

hynade Plasma Cutter, Dual Voltage 115/230V 40A Plasma Cutting Machine, Inverter Metal Plasma Cutter Max Cutting Thickness 12mm (HYC45D 115/230V)

  • ✌ 40A Plasma Cutter, Dual voltage 115/230v High frequency 50/60Hz, 45Amps up Power breaker is suggested. 40Amps cutting current, High frequency arc starting, Quality cutting thickness 6mm, Severance cutting thickness 10mm@65PSI 40A 230V.
  • ✌ Very good to cut car steel (frame), Very light weight and compact design, Adopt Latest IGBT inverter technology, Easy cut stainless steel, Alloy Steel, Mild Steel, 2mm thin Copper, 4mm Aluminum, It is High frequency touch metal arc starting..
  • ✌ Input voltage is 115/230v, Max current is 35Amps under 115V clean cutting thickness 4mm @65PSI 35A 115V. Max 40Amps under 230V, Clean cutting thickness 8mm@65PSI 40A 230V 45A up Power breaker is suggested..
  • ✌ Function, Machine with current LED display, 115/230V power lamp, Current knob, Time for post air can be adjust. Duty cycle 60% in 40A, 100% in 30Amps, Maybe the cutting arc not stable if the air less or over the range. We suggest air pressure 65PSI (0.6Mpa), You can get reading from air gauge which come with machine..
  • ✌ hynade is high level brand at welding field. We focus on welding business more than 20 years. Also we have a service team in American..
Check Stock

Plasma Cutter TIG Welder Pulse Stick Welder - CT418 3 in 1 Combo Welding Machine 180A Pulse TIG/Arc Welding 40A Plasma Cutting 110/220V Dual Voltage Digital Display Portable Welder Machine

  • ...the welding shape more beautiful and improvers tungsten life..
  • ❆ Stick/ARC Welder: 10-160amp output current @220V. Easy arc start, stable welding arc.
  • Deep weld pool and beautiful welding shape..
  • ❆ What You Get: Our worry-free 12-month warranty, and friendly customer service. The CT-418 machine comes with a PT-31 cutting torch, TIG-17FV torch for tig welding. You also get stick holder, earth clamp, power cable, air hose, and torch consumables..
Check Stock

Plasma Cutter, HeroCut 45i, 110 Voltage IGBT Inverter Air Plasma Cutter 6mm Clean Cut, 10mm Severance Cut In 70PSI (CUT45i 110v)40A or 63A Power Breaker is suggested

  • Plasma Cutter Input Voltage 110V, 60Amps Power breaker is suggested. 40Amps cutting current,High frequency arc starting, Quality cutting thickness 6mm, Severance cutting thickness [email protected] 40Amps.
  • Very compact design, Adopt Latest IGBT inverter technology, Easy cut stainless steel, Alloy Steel, Mild Steel, Thin Copper, Aluminum, It is High Frequency Arc Starting. 1 year warranty for machine..
  • Input voltage is 110V 50/60Hz, 60Amps Power breaker is suggested. Machine maybe explode if plug it to 220V, Make sure you fix machine to correct voltage, Better use 60Amps power breaker for this machine..
  • 40Amps output, Duty cycle 60% in 40Amps, 100% in 35Amps, Air pressure range from 40-70PSI, Maybe the cutting arc not stable if the air less or over the range..
  • We supply high quality machine, very lightweight but powerful, Very easy to carry, Machine come with quality accessories and torch parts, Easy cut stainless steel, Alloy Steel, Mild Steel, Thin Copper, Aluminum. ( search torch consumables at amazon ASIN: B08BCLNL5B ).
Check Stock