Top Cutting Steels
Accusize Industrial Tools 3'' by 1'' 90 Deg. Square Shoulder Indexable Face Mill with 17 Pcs Apkt1604 Inserts, 4508-0018b+0056-1604
- All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
Check StockHORL 2 Walnut Rolling Knife Sharpener Engineered in Germany for Straight Edge with Industry Diamonds for Steel of any hardness and Magnetic Angle Technology with 15 & 20 Degrees
- The HORL2 sharpener has the flexibility to satisfy individual requirements in knife sharpening with interchangeable grinding discs and a Magnetic Angle Support with a 15° angle for a fine edge and a 20° angle for a robust blade..
- The HORL2 sharpening system combines diamond and ceramic discs to sharpen knives of any hardness, including European kitchen knives, hard or soft steel, stainless and rust-resistant steels, and outdoor knives. The industrial diamonds used are the most durable and efficient abrasives..
- Achieve a sharp, long-lasting edge on your knives with the 20° grinding angle, perfect for robust cutting tasks in the kitchen and beyond..
- Create a finely honed, razor-sharp edge on your knives with the extra fine 15° grinding angle, ideal for fine cutting work such as sushi, sashimi, Damascus knives, and particularly hard steels with a high carbon content..
Check StockAUTOTOOLHOME 3/8' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/8 in)
- AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
- Carbide milling bits Diameter: 3/8'', Shank Diameter: 3/8'', Flute length: 1'', Overall Length: 2-1/2", 4 Flutes.
- This 1/4 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
- End Mill spiral router bits are used for side milling, end milling, finish machining, etc..
- Unequal flute spacing and irregular helix flutes ensures stable machining of difficult-to-cut materials and higher efficiency,Vibration absorption provides stability, high efficiency finishing and improved chip disposal.
Check Stock5PCS 1/2' Carbide Square End Mill Bits Set, Milling Bits Cutter 1/2 Carbide End Mills for Alloy Steels/Hardened Steels, HRC 45 Deg Single End 4 Flute AlTiN Coating
- Package Included: 5pcs 1/2" carbide square end Mill.
- Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel..
- Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance..
- HRC 45 deg :carbide end mill tools excel at working carbon steels (~ HB225), alloy steels (HB225 ~ 325), pre-hardened steels (up to HRC45), hardened Steels (HRC40 ~ 45), cast iron..
- Flutes:4 Flutes,high rigidity ,widely used in shallow slot,profile milling,and finish machining..
Check StockSnapmaker CNC Bits (5 Bits)
- High strength and hardness, durable in use.
- Chatter resistant design for superior surface finishes.
- Sharp cutting reasonable matched with high strength of cutter.
- Made of alloy steels/hardened steels, durable and practical to use.
- Application for wood, MDF, HDF, solid wood, epoxy board, PVC, plastic.
Check StockAccusize Industrial Tools 4 Pc 90 Deg Indexable End Mill Set with Apkt11t3 Inserts, Cutter Diameter Includes 1/2'', 5/8'', 3/4'' and 1'', 0028-8416
- 90Degree Cutting angle Nickel Plated. Screw down insert.
- All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
- Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth.
- with 1 Torx Wrench. Aluminum fitting case. Carbide insert for each end mill.
- Uses APKT / APHW / APKR_APht / APMT insert (sold separately).
Check StockF&D Tool Company 11091-A7382 Staggered Tooth Side Milling Cutter, High Speed Steel, 3.75\ Diameter, 1/2\ Width of Face, 1.25\ Hole Size
- 90Degree Cutting angle Nickel Plated. Screw down insert.
- All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
- Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth.
- with 1 Torx Wrench. Aluminum fitting case. Carbide insert for each end mill.
- Uses APKT / APHW / APKR_APht / APMT insert (sold separately).
Check StockStarrett KD0300-N 3-Inch Diamond Grit Holesaw
- Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials.
- Uniform synthetic diamond grit bonded over a durable steel platform.
- Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface.
- Recommended cutting speed is from 150 to 300-RPM.
Check StockStarrett KD0400-N 4-Inch Diamond Grit Holesaw
- Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials.
- Uniform synthetic diamond grit bonded over a durable steel platform.
- Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface.
- Recommended cutting speed is from 150 to 300-RPM.
Check StockStarrett KD0600-N 6-Inch Diamond Grit Holesaw
- Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials.
- Uniform synthetic diamond grit bonded over a durable steel platform.
- Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface.
- Recommended cutting speed is from 150 to 300-RPM.
Check StockStarrett KD0414-N 4.1/4-Inch Diamond Grit Holesaw
- Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials.
- Uniform synthetic diamond grit bonded over a durable steel platform.
- Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface.
- Recommended cutting speed is from 150 to 300-RPM.
Check StockStarrett - Sta-0329 KD0500-N 5-Inch Diamond Grit Holesaw
- Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials.
- Uniform synthetic diamond grit bonded over a durable steel platform.
- Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface.
- Recommended cutting speed is from 150 to 300-RPM.
Check Stock