Top Cutting Stone

Sharpening Stone Holder,Yosoo Professional Whetstone Non Slip Adjustable Holder Household Sharpening Stone Base

  • Sharpening Stone Holder made of high quality chrome-plated iron and silicone material, the base is sturdy and stable, nice appearance, practical and durable..
  • The stone holder is adjustable, easy to solidify the sharpening stone, suitable for sharpening cutlery at home..
  • Silicone base design is non-slip, effectively anti-skidding during sharpening..
  • Suitable for various whetstone, oils stone or diamond stones of any size..
  • Ideal for cutting tool grinding, jade, seal cutting tool, perfect sharpening tools..
Check Stock

Sharp Pebble Two Side 3000/8000 Grit Knife Sharpening Stone and Large Dual Grit Flattening Stone with NonSlip Bamboo Base

  • ...Flattening Stone: This innovative Flattening Stone is different from any other flattening stone in the market. It is a two-sided, dual grit, diamond grid flattening system designed to produce excellent flat surfaces on sharpening stones. Built from high-quality silicon carbide the flattening stone particles help in cutting sharpening stones material precisely. This makes it ideal for flattening as it cuts quicker and wears slower making it extremely strong and durable.
  • ✅ Multipurpose Use: Our professional-grade knife sharpener stone is highly durable & long-lasting. This whetstone sharpener can sharp ANY BLADE out there, be it any kitchen knife set, chef knife, steak knife, sontoku knife, paring knife, sushi knife, cleaver knife, kitchen knives, Japanese knife, butcher knife, paring knife, BBQ knife, Hunting Knife, Pocket Knife, Scissor, Chisel, Blade, Straight Razor & it can even sharp an axe..
  • ✅ Dual Grit Flattening Stone: The 120 grit(Dark Grey) side is used to flatten coarse water stones with 900 grit & lower, this side provides the necessary cutting action to effectively flatten the stone. However, when flattening finer Waterstone, a coarse grit leaves a finish that you may find undesirable. So we have designed #320 grit(Light Grey) side for w....
Check Stock

SUBRILLI 0.6mm Superfine Diamond Wire Cutting Saw Blade for Jade Metal Marble Granite (3 Meters/Lot)

  • SIZE: 0.6mm Diameter and 3M Length Saw blades cutting wire.
  • USAGE: All kinds of precious stones and other abrasive stone glass model of high-precision cutting of various fine cut gemstones.
  • GOOD QUALITY: Made of high quality diamond and steel.
  • WIDELY USE: Design for high-precision cutting granite, marble, concrete, stone, jade, glass, metal, plastic, etc..
  • EXCELLENT PERFORMANCE: It is electroplated, provide sharper cutting and durable, smaller cutting seam, low waste and more yield.
Check Stock

Sharp Pebble Two Side 1000/6000 Grit Knife Sharpening Stone and Large Dual Grit Flattening Stone with NonSlip Bamboo Base & Angle Guide

  • ...Flattening Stone: This innovative Flattening Stone is different from any other flattening stone in the market. It is a two-sided, dual grit, diamond grid flattening system designed to produce excellent flat surfaces on sharpening stones. Built from high-quality silicon carbide the flattening stone particles help in cutting sharpening stones material precisely. This makes it ideal for flattening as it cuts quicker and wears slower making it extremely strong and durable.
  • ✅ Multipurpose Use: Our professional-grade knife sharpener stone is highly durable & long-lasting. This whetstone sharpener can sharp ANY BLADE out there, be it any kitchen knife set, chef knife, steak knife, sontoku knife, paring knife, sushi knife, cleaver knife, kitchen knives, Japanese knife, butcher knife, paring knife, BBQ knife, Hunting Knife, Pocket Knife, Scissor, Chisel, Blade, Straight Razor & it can even sharp an axe..
  • ✅ Dual Grit Flattening Stone: The 120 grit(Dark Grey) side is used to flatten coarse water stones with 900 grit & lower, this side provides the necessary cutting action to effectively flatten the stone. However, when flattening finer Waterstone, a coarse grit leaves a finish that you may find undesirable. So we have designed #320 grit(Light Grey) side for w....
Check Stock

SHDIATOOL 3 Pieces 4-1/2 Inch Diamond Saw Blades Cutting Discs Set for 7/8\ or 5/8\ Arbor

  • Wet or dry cutting, For 7/8" or 5/8" Arbor(Adapter included for 5/8").
  • Blades Kit contains: continuous/segmented/turbo rim per 1 piece.
  • 1 piece continuous rim For Smooth cutting of Tile,Ceramic,Marble,Granite.
  • 1 piece segmented rim For Fast general purpose cutting for Concrete,Paver,Masonry,Terrazzo,Stone.
  • 1 piece turbo rim For smooth & fast cutting of Granite,Stone,Masonry,Terrazzo,paver,Concrete.
Check Stock

MantisTol 8.9

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. You need to know that this can only cut vinyl plank, not laminate floor or wood floor!!!No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time..
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder.
  • it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts..
  • " L & " cut and Lengthwise cut (Solve the installation of wall and corner). Clearly marked measuide. 0-45 Angle Cutting, Cutting max.depth 8mm.Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around, you will like it.
  • 2.2mm thick 9 length tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (did flooring on about 2000 square feet), Otherwise it will quickly end the service lifethis is a man-made damage and is not covered by the warranty! Or replace blade..
  • Angle Cutting: 0 - 45 inch 160mm wide plank.
Check Stock

MANTISTOL 13

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty..
  • No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time. If you received the cutter that cuts less than 8mm thick, please remove the blade, clean the aluminum shavings in the groove, and then assemble the blade correctly in the center of the blade bar..
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder.
  • it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts..
  • 13" cutting width and 8mm cutting depth. Straight cut, Angle cut.
  • " L & " cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45 Angle Cutting, Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around..
  • 2.2mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (installed flooring on about 5000 sq.ft ) Otherwise it will quickly end the service lifeman-made damage is not covered by th....
Check Stock

Silver Polish, Polishing Bar 10Pcs Polishing Cleaner Tool, DIY Enthusiast Jewelry Manufacturer for Jewelry Repairer Jewelry Shop

  • Diamond Grinding Burr: 6 shape, evenly coated with diamond particles, Different grinding heads for grinding, engraving, cutting, polishing, engraving and etching, for hard materials such as stone, glass, metal, hardwood, ceramic tile, marble, granite..
  • Abrasive Mounted Stone: 10 sizes. Head shape cylinder, tapered. Suitable for all kinds of mold polishing, metal, wood, jade, agate, DIY grinding and polishing deburring..
  • Diamond Cutting Wheel: Evenly coated with diamond particles, Suitable for cutting gems, glass, ceramics, tiles, rocks, aluminum and copper..
  • Grinding and Polishing Bit Cutting Wheel Kits: Suitable for cutting, engraving, grinding, polishing, deburring and more. Suitable for most common rotary tools and can be used with electric grinders or other rotary tools..
Check Stock

Henf 14\ Electric Cut Off Saw, Portable Wet/Dry Electric Circular Concrete Saw/Power Angle Cutter with Water Line Attachment & Guide Roller, 5'' Max Cutting Depth (With Blade)

  • Electric Concrete Saw with dynamic balancing motor, which will make less vibration while using to provide steady cutting.
  • Strong motor that delivers the power to cut through granite, porcelain, concrete and other stone materials with ease.
  • Extraction dust port can vent the cutting debris timely, help you clear the cutting surface.
  • Water line attachment for cooling down the blade during wet cutting, aslo it can decrease dust.
  • Powerful 2800w power to easily cut different stone material with maximum 5" cutting depth, great for using at home, construction site and factory.
  • Overall Dimension: 30"(L) x 10"(W) x 16-3/4"(H) ,Max Cutting Depth: 5.
Check Stock

SHDIATOOL Diamond Saw Blades Cutting Discs Set Segmented Cutter Wheel for Tile Ceramic Porcelain Marble 7/8\ or 5/8\ arbor 6 Pieces 4-1/2 Inch

  • Wet or dry cutting, For 7/8" or 5/8" Arbor(Adapter included for 5/8"),sutiable for angle grinder.
  • Blades Kit contains: continuous tile blade/segmented concrete disc/turbo rim granite saw bladeper 2 pieces.
  • 2 pieces continuous rim wheel For Smooth cutting of Tile,Ceramic,Marble,Granite.
  • 2 pieces segmented rim For Fast general purpose cutting for Concrete,Paver,Masonry,Terrazzo,Stone.
  • 2 pieces turbo rim For smooth & fast cutting of Granite,Stone,Masonry,Terrazzo,paver,Concrete.
Check Stock

Stadea SBD103C Diamond Saw Blade 5-Inch Continuous Turbo For Grinder - Granite Dry Cutting, 8 MM Segments

  • Stadea Series Standard G - 5" Turbo continuous Diamond Saw Blade designed for Granite dry cutting.
  • Built with high quality diamond with less wide turbo segments for smooth faster cut to avoid chipping on Granite and other hard stone dry cutting.
  • 8 MM high thick segments for smooth cut and longer life, Max RPM 12000.
  • Smooth cuts on Granite and other hard stone, A real time saver for professional stone fabrication.
  • Quad hole to connect flush cut adapter for flush cuts, 5/8" to 7/8" arbor hole.
Check Stock

Toolman Premium Circular Saw Blade Universal Fit 7\ For Tile Marble Concrete STH028

  • This diamond masonry blade has a continuous rim for smooth, chip-free cutting..
  • Use Wet Continuous rim provides the smoothest possible chip-free cuts.
Check Stock