Top Cutting Tap Set

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).
Check Stock

45 Pc Tap & Die Set Metric Mm Titanium Tungsten Steel Jumbo Thread Renew Tool

  • 86 Piece Tap and Die Set Bearing Steel Sae and Metric Tools, Titanium Coated with Metal Carrying Case.
  • Size:14.8 x 10.7 x 2.2"inch / 37.6 x 27 x 5.6cm. Weight:12lb / 5.4kg. Material upgrading:Alloy Steel 55¡ã- 60¡ã, Sizes Stamped Engraved-etched On the Metal.
  • SAE TAP SIZES and SAE DIE SIZES: 1/8"-27NPT, 4-40, 6-32, 8-32, 10-32, 10-24, 12-24, 1/4"-20, 1/4"-28, 5/16"-18, 5/16-24, 3/8"-16,3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18.
  • METRIC TAP SIZES and METRIC DIE SIZES: M3-0.5, M4-0.7, M5-0.8, M6-1.0, M7-1.0, M8-1.0, M8-1.25, M9-1.25, M10-1.5, M10-1.25, M11-1.5, M11-1.25, M12-1.75, M12-1.5, M14-2, M14-1.5, M16-2, M16-1.5.
  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.
  • Easy Storage: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
Check Stock

NORTOOLS Drill Tap HSS Combination Drill and Tap Set with 1/4 Inch Quick Change Adapter,6-32 to 1/4-20 Screw Tapping bit Tool

  • ✅【High-quality materials】SNUSIM combination drill tap bit is made of high quality High-Speed Steel 4341 and steel 6542. Strong hardness and good durability.The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
  • ✅【Standard sizes】6Pcs Combination Drill and Tap Bit, Inculued 6-32NC (3.5mm), 8-32NC (4.2mm), 10-32NC (5mm), 10-24NC (5mm), 12-24NC (5.7mm), 1/4-20NC (6.35mm), to meet your diversified requirements..
  • ✅【Applicability】Drill tap bits set suitable for drilling tapping cutting on light metal aluminum board iron etc. Deburr/countersink also provided on bit beyond back taper. 4341 material is suitable for wood, aluminum, iron and other materials with lower hardness. The 6542 material has high hardness and is more durable, and can be applied to steel plates, even thinner 304 stainless steel plates of about 2mm..
  • ✅【High efficiency】 Complete hole drilling, tapping, durable and countersinking in one operation and greatly save processing steps and time costs, improve working efficiency. Recommended for use it on a tapping machine. Pay attention to the operation method when using the electric drill. Excessive shaking and tilting w....
Check Stock

Muzerdo 115PCS Sae and Metric Bearing Steel Tap and Die Rethreading Kit with Metal Box

  • ...dly speaking, they are all roughly the same, with a few notable exceptions. The tap wrench from Muzerdo, is the best on the market..
  • Construction Material – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more.
  • Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you don’t have t.
  • Metal Storage Case – More than with many other types of tools, the storage case is an important part of the tap and die set. Frankly, because these sets can come with multiple parts, you do want a case that is well designed to keep all the little pieces well organized and safely stored..
Check Stock

GMTOOLS 110PCS Tap and Die Set Metric Size Standard Threading Tool Set M2-M18 with Adjustable Handles Accessories and Storage Case Tap & Die Set for Cutting External and Internal Threads

  • [High-Quality Materials]: This metric tap set is made of high-quality hardened alloy steel, improving product hardness, wear-resistance, and increasing product service life, durable and superior strength..
  • [Excellent Performance]: Suitable for re-threading fasteners and fastener holes, cutting or updating internal and external threads. Fully ground & high-precision tap is sharp for tapping and chip removing operation, running smoothly and efficiently..
  • [Versatility]: Tapered Teeth Design starts threading more easily and smoothly, and prevents over-threading. Suit for creating new threads or repairing damaged threads on metals like carbon steel, cast iron, aluminum and stainless steel..
  • [Most Common Sizes in Metric]: This tap and die set comes with 110 pieces totally in a storage case. This metric tool set Include: 1) 35 pcs plug taps.
  • [Portable Case]: Each tap and dies set is equipped with a iron toolbox which is engraved with corresponding scales. And it’s convenient to store them in the case to prevent dust..
Check Stock

Yakamoz 10pcs Micro Taps Bits Mini Machine Screw Drill Tap Set Metric Thread Screws Plug Bit Small Tapping Bits Tool

  • This tap and die set is made of made of high carbon chromium bearing steel which are more stronger, An overall chromium coating improves the corrosion resistance of the generally used through-hardening bearing steel..
  • 86 piece tungsten steel set comes in an organized, rugged plastic storage case.
  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman.
  • Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.
  • Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.
Check Stock

ATOPLEE Spiral Point Plug Threading Tap ,5pcs HSS 6542 Titanium Coated Metric Right Hand Thread Taps,M3-M8

  • ...dly speaking, they are all roughly the same, with a few notable exceptions. The tap wrench from Muzerdo, is the best on the market..
  • Construction Material – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more materials and they will stay sharper for longer..
  • Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you don’t have t.
  • Metal Storage Case – More than with many other types of tools, the storage case is an important part of the tap and die set. Frankly, because these sets can come with multiple parts, you do want a case that is well designed to keep all the little pieces well organized and safely stored..
Check Stock

wesleydrill Titanium Combination Tap Drill Bit Set 6 Pcs M3-M10 Screw Tapping Bit Multi-Function Bit Set Fit for Light Metal Aluminum Board Iron etc

  • [Specifications and packaging]: 6 Piece multi-function drill bit set.Include size:M3X0.5,M4X0.7,M5X0.8,M6X1,M8X1.25,M10X1.5..
  • [Fitment]: Tap drill bit set is a convenient hex shank drill tap bits set that can simultaneously complete hole drilling, tapping, deburring and countersinking.Suitable for drilling tapping cutting on light metal aluminum board iron etc..
  • [Material]: Thread drill bit set is made of HSS4341 (high-speed steel) +titanium coating for capability and durability..
  • [Advantage]: Drill tap bits set's 1/4 inch hex shank fits into power tools more easily and securely.When using M3-M6, the most suitable speed of the electric drill is 1200/sec, the M7-M10 is 1000/sec..
  • [Quick Replacement, One-Click Drilling]: Metric tap drill bits fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
Check Stock

HARFINGTON Tap & Bit Sets 1/4-32 UNEF 2B Straight Flute Machine Thread Milling Tap 5.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

  • Tap & Bit Sets: Tap size: thread size: 1/4-32 UNEF.
  • total length: 68mm / 2.68". Drill bit size: cutting edge diameter: 5.5mm / 0.217".
  • Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
  • Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
  • Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..
Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).
Check Stock

Husqvarna 522L Gas String Trimmer

  • Hard chromium plated cylinder bore provides increased durability and extended product life.
  • Bevel gear designed with high torque and the cutting equipment parallel to the ground for best cutting performance.
  • Stop switch automatically resets to the ON position for easier starting.
  • Heavy duty twin line cutting system with Tap 'n Go for quick line feed.
  • Starting a cold engine is easier with the intuitive choke which is easy to reach and set.
Check Stock

uxcell Tap & Bit Sets M11 x 1.5 H2 Straight Flute Machine Thread Milling Tap 9.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

  • Tap & Bit Sets: Tap size: thread size: M11 x 1.5.
  • total length: 85mm / 3.35". Drill bit size: cutting edge diameter: 9.5mm / 0.374".
  • Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
  • Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
  • Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..
Check Stock