Top Cutting Tool Coatings

ADJUSTABLE EXPANDING HAND REAMER 4 PIECE SET 1/4\- 3/8\ - NEW MICRO REAMER SET

  • Alloy Tool Steel Reamer: Hard and durable, reaches H8 level of drilling accuracy, and reduces surface roughness of workpieces.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
  • Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
  • Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
  • Application: Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
Check Stock

Slice Auto Retract Box Cutter Utility Knife Gray Green

  • Auto-retractable Blade is safely hidden when not in use (Must Hold Rubberized Slider Button While Cutting).
  • Zirconium Oxide Ceramic Blade with Rounded Tip for Safety = Non-Conductive, Anti-Magnetic, Never Rusts, Chemically Inert (No Oil Coatings) + Stays....
  • 1 Slice Ceramic Blade = Up to 20 Metal Blades = Less Blade Changes = Less $$$ = Less Downtime = Less injuries + Simple No Tool Blade Change....
  • Ceramic Blade only protrudes 1/2" - designed primarily for cutting corrugated packaging, foam, vinyl, boxes, cardboard, etc.
  • To cut paper and thinner items please try the Slice 00116 Precision Cutter or 00100 Safety Cutter or use the Pointed Blades 10408.
Check Stock

Utoolmart Adjustable Hand Reamer 23-26mm High Speed Steel H8 Milling Cutter Tool 1pcs

  • 【High-speed Steel Tool】- Good for general purpose applications, offering combination of hardness and toughness for wear resistance.
  • 【Uncoated Tool】- Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
  • 【Hand Reamer】- Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
  • 【Straight Flute Tool】- Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
  • 【Application】- Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
Check Stock

uxcell Adjustable Hand Reamer 19-21mm High Speed Steel H8 6 Straight Flutes Milling Cutter Tool

  • High-speed Steel Tool: Good for general purpose applications, offering combination of hardness and toughness for wear resistance.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
  • Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
  • Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
  • Application: Designed for accurate reaming in A3 steel, alloy steel, cast iron, cast steel, aluminum and other metal materials.
Check Stock

Utoolmart Round Shank Twist Drill Bits 1.5mm High Speed Steel 4341 with 1.5mm Shank 10 Pcs

  • 【Size】- Cutting Edge Diameter : 1.5mm / 0.06 inch.
  • 【High Speed Steel Tool】- High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • 【Round Shank】- Round shanks allow use with a wide variety of toolholding systems.
  • 【Uncoated Tools】- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • 【Versatile Uses】- For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass and metal materials.
Check Stock

KEO 53522 Cobalt Steel Single-End Countersink, TiN Coated, 90 Degree Point Angle, Round Shank, 5/16\ Shank Diameter, 1/2\ Body Diameter

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Check Stock

KEO 53530 Cobalt Steel Single-End Countersink, TiN Coated, 100 Degree Point Angle, Round Shank, 1/4\ Shank Diameter, 5/16\ Body Diameter

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Check Stock

KEO 53514 Cobalt Steel Single-End Countersink, TiN Coated, 82 Degree Point Angle, Round Shank, 3/8\ Shank Diameter, 3/4\ Body Diameter

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Check Stock

KEO 53511 Cobalt Steel Single-End Countersink, TiN Coated, 82 Degree Point Angle, Round Shank, 1/4\ Shank Diameter, 3/8\ Body Diameter

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Check Stock

KEO 53513 Cobalt Steel Single-End Countersink, TiN Coated, 82 Degree Point Angle, Round Shank, 3/8\ Shank Diameter, 5/8\ Body Diameter

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Check Stock

KEO 53512 Cobalt Steel Single-End Countersink, TiN Coated, 82 Degree Point Angle, Round Shank, 5/16\ Shank Diameter, 1/2\ Body Diameter

  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Titanium nitride coatings add a hard layer of gold-colored ceramic to the surface that extends tool life and permits faster cutting speeds than uncoated tools.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Check Stock

Drill America #43 Solid Carbide Drill Bit, DMOD Series

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Manufactured to National Aerospace Standard 907.
Check Stock