Top Cv Joint Clamp

Dorman 614-030 Uni-Fit C.V. Joint Boot Air Powered Installation Tool Universal Fit

  • 【Universal Fit】Ideal for installing clamps on fuel filters, water pumps, CV joint boots,ATV axle boot and other cooling system hoses.This CV joint axle boot clamp plier fits most of cars..
  • 【With 20PCS CV Boot Clamp】 10X small clamps and 10X big clamps is included.Made of stainless steel, with high toughness and adjustable length.It's perfect for you to replace the car broken drive shaft CV boot clamp..
  • 【High-quality Materials】The pliers are made of high-quality stainless steel as a whole, which is durable, corrosion-resistant, oil-resistant, high-temperature resistant, and has a long service life. The clamp head undergoes a quenching process for higher hardness. Equipped with an ergonomically designed non-slip insulated handle, it is practical and comfortable..
  • 【Simple & Easy To Use】Crimp the clamp and then push down on the crimp to lock into place. It's a good partner of a 1/2" extension handle or torque wrench..
  • 【Package Includes】10X Small Clamps, 10X Big Clamps & 1X Pliers Tool. The clamp and tool set can be used directly, which is conv....
Check Stock

CV Joint Boot Clamp Pliers , Ear Boot Tie Pliers, Car Band Tool Kit, Automotive Hose Axle Plier CV Clamp Tool CV Joint Banding Tools for Most Cars with 3 Pair Clamps

  • Suitable for ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses.
  • Plier works on steering gear gaiters and fuel hoses on various brands of cars.
  • Can be used for working on Oetiker System hose clamps.
  • ◇ High-quality : The CV Joint Banding Tool is made of quality stainless steel throughout, which is durable, corrosion resistant, oil resistant, high temperature resistant, and long lasting. The plier head is hardened and treated for higher hardness.
  • ◇ How to Use : Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and cut.
  • To complete clamping, fold down remaining band tail band into clip and secure by tapping down clip ears clip.
  • We recommend double-wrapped band for added strength.
  • ◇ CV Joint Boot Clamp Plier : Includes 3 X small clamps and 3 X large clamps. Made of stainless steel, they are very tough and can lock items very firmly. The locking teeth stop the tie at the desired length and get tighter with each pull. I....
Check Stock

Ear Type CV Joint Boot Clamp Plier

  • Performance Tool Ear Type CV Joint Boot Clamp Pliers (W83013).
  • For all ear-type clamps including GM FWD outboard CV joints..
  • Ideal for installing clamps fuel filters.
  • Great for CV joint boots and other cooling system hoses.
  • Heavy duty steel and no-slip grip construction.
Check Stock

MIKKUPPA CV Joint Boot Clamp Pliers - Ear Boot Tie Pliers, Car Band Tool Kit, Automotive Hose Axle Plier

  • Pliers constructed from pressed steel with the black-coated finish. Safe and durable. This tool is essential for fixing CV boots..
  • CV boot clamp installer: With a built-in cutter and winding mechanism the banding can be tightened and cut quickly and effectively..
  • CV joint boot clamp plier set: Heavy-duty pliers with steel jaws and formed handles for extra comfort in use..
  • To be used with any banding up to 10 mm (0.39 inch) in width, Used for securing ATV UTV CV boot clamps..
  • WHAT YOU GET: CV boot clamp piler set X1, With Professional After-Sales Service..
Check Stock

Szliyands CV Joint Ear Clamp Banding Tool

  • The perfect set for fast and simple tensioning and securing of CV boot banding strap..
  • CV boot clamp installer With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively..
  • This tool is essential for fixing CV boots CV joint boot clamp plier set Heavy-duty pliers with steel jaws and formed handles for extra comfort in use..
  • Suitable for ear-type hose clips found on fuel, cooling system and vacuum hoses..
  • Can also be used for securing late model GM CVJ boot clamps..
Check Stock

YuangTow Universal Stretch CV Boot Tool Installation Mount Cone for Fitting Boots With A Smooth Surface Cars Accessories Plastic Auto Replacement Parts, 1 PCS, Black, 13.07 x 4.84 4.37 inches

  • ★Function:Universal fit CV boot air tool,Sure makes changing CV boots on 4 wheelers very easy as you don't have to disassemble joint,saves a lot of time when replacing outer CV boots..
  • ★Material:CV removal tool made of high quality steel,rust proof, and strong toughness to ensure durability and reliability.
  • ★Multipurpose:CV boot tool can be used for Vtt,Toyota Corolla,Audi,BMW,saves time and labor easy to use anyone with UTV OR ATV will find this product great..
  • ★Design: Simple one button operation expands the CV boot in seconds to fit the CV joint and can be supplied separately or used with CV dust boot, grease and clamp.
  • ★We are specialized in producing various tools, please go find all kinds of tools fittings you need in LAJIAOZ store .Customer satisfaction is our top priority,if there anything missed or broken,pls let us know,we'll reply within 24 hours.
Check Stock

Ear Clamp Pliers with 12pcs Single Ear CV Boot Clamps Band Tool Kit, Ear Clamp Pincer, Ear-Type Clamp Crimp Hand Tool Ear Type CV Joint Axle Boot Clamp Pliers Tool for Auto ATV UTV

  • Crimping Plier Tool: Heavy-duty Ear Clamp Pincer equipped with front steel jaw and non-slip grip handles which is convenient for your installation, widely applied to single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses. The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps..
  • Clamp Size Are Adjustable: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275″ (7mm) in width & 0.023″ (0.6mm) in thickness, Large-Adjust diameter from 1.96-4.72 inch(50-120mm), 0.354″ (9mm) in width & 0.031″ (0.8mm) in thickness..
  • Material: The CV boot clamp tool is made of high quality 304 stainless steel that are more salt resistant, anti-rust, anti-corrosion than other 201 stainless steel, Loose or damaged clamp can be harmful to your automobile and create grease spills, the new clamps can help you reseal and fastened to prevent leakage..
  • Function and Use: These clamps are locking secure and tight on drive & CV Axle. They are good for you to replace the car broken drive shaft CV boot clamp..
  • What You’ll Get: 1Pcs Ear Clamps Pliers, 6Pcs Small CV....
Check Stock

Heavy Duty CV Boot Clamp Pliers Joint Tool Ear-Type Clamp Crimping Removal with a 1/2' Torque Wrench Universal Fit VW, Audi, BMW, Mercedes, Honda, Mazda Vehicles

  • The CV Boot Clamp Pliers Tool is perfect Tool for Ear-Type Clamp Crimping or Removal on VW, Audi, BMW, Mercedes, Honda, Mazda Vehicles to crimp and flatten the clamp on Ear-Type constant velocity joint boot clamps..
  • Constructed from heavy-duty steel with comfort grip handles.
  • Perfect fit all ear-type clamps including GM FWD outboard CV joints, also suitable for installation of certain clamps on fuel filters, water pumps and other cooling systems..
  • Equipped a "straight" crimper pliers on the end allows this CV Boot crimping on clamp ears to greatly prevent leakage..
  • Easily crimp the loop and then push down on the crimp to lock into place. 1/2" square holes allow you to use with a 1/2" extension handle or torque wrench..
  • 100% MONEY BACK GUARANTEE. Buy with no risk..
Check Stock

ABN CV Joint Ear Clamp Banding Tool – 10mm Fuel Hose, Cooling System, Vacuum Hoses Clamping

  • [Effortlessly Install CV Boot Clamps]: Use the ABN CV Joint Ear Clamp Banding Tool – 10mm Fuel Hose Vacuum Hoses Clamping Tool to tighten and secure a CV boot banding strap quickly and easily.
  • [Fits Your Needs]: Use with banding straps up to 10 mm (2/5in) wide.
  • Suitable for ear-type hose clips found on a fuel, cooling, and vacuum hoses and on steering gear gaiters.
  • Compatible with VAG, Opel, BMW, Mercedes Benz, Honda, Mazda, and more.
  • [Easy To Use]: Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip tool nose and through winding mandrel slot.
  • Place 1/2-inch ratchet wrench on winding mandrel.
  • Bend band back over boot and onto clip to apply tension and cut.
  • Fold remaining band tail into clip and secure by tapping down clip ears.
  • [Comfortable Grip]: CV boot clamp tool features a 4.25-inch (10.8 cm) long plastic handle and a 1-inch (2.5 cm) long rubber grips on side levers for ultimate control, less user fatigue, and more productivity.
  • [Built To Last]: Constructed from zinc-plated alloy steel.
  • Standard band clamp crimper banding tool works with the installer’s ratchet and 1/2-inch socket (or included lever) to tighten and hold a band secu....
Check Stock

GEARWRENCH CV Joint Boot Clamp Tightening Wrench - 3191D

  • CV joint boot clamp wrench securely fastens band-it style free-end clamps, roll band clips and pre-formed CV boot clamps.
  • Use by turning the winding mandrel with a 1/2-inch socket or wrench.
Check Stock

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit Heavy Duty 10 Pounds Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

  • Easy To Remove CV Axle: Use this CV joint puller, You will pull the old stubborn CV axle and get the new axle installed, not need spend a lot of effort, without causing damage to expensive aluminum transmission cases or other components.
  • Heavy Duty: Our slide hammers are heavier and larger than normal ones, easier to use and work more better, hammer weight is 10.5 lb, is twice the average slide hammer, so the generated pulling force is also twice of a normal slide hammer, length is 19.5 inches, have sufficient length slide to generate more force, slide hammer and the VC join fork is made of heavy duty steel, durable and not easy to break.
  • Effient Slide Hammer: Our slide and the slide hammer follow ergonomic design, the handle is curved and have a large surface, which use more comfortable. use our CV joint slide hammer, work more efficiently.
  • Wih 63mm 48mm Joint Fork: Our kit include opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have....
Check Stock

ACCEL 49505 SuperTuner - Handheld Computer Programmer

  • Brand New Driveshaft Propeller Shaft CV Joint Repair Kit.
  • This Kit Repairs the Front Shaft, Transfer Case Side (This front driveshaft cv joint ONLY FITS to driveshafts with one cv joint and one universal joint. It does not fit to shafts with cv joints on both ends.).
  • See Compatibility Chart To Verify Your Specific Vehicle Year, Make, & Model.
  • Replaces 52105728AD, 52105758AD, P52853431AA, P52853432AA.
Check Stock