Top Damaged Thread Removal Solutions

6mm x 0.75 Metric Taper and Plug Tap Right Hand Thread M6 x 0.75mm Pitch

  • ...ndicular to each other and tapping smoothly. It also has a smoothing effect on the thread (removes burrs). Suitable for thick steel, rubber, aluminum, copper, and wood..
  • Good Helper: Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading. Can make new threads or re‑thread damaged or jammed threads.Number Of Threads: 3. Thread Tolerance Grade: 0.014. Through Hole/Blind Hole: Through Hole. Material: High speed steel. Tap Style: Straight groove. Thread Code: Standard thread..
  • Suitable for: Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc. Appropriate addition of coolant (e.g. water) can extend the service life when tapping..
  • Replacement for: The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing. Mainly used for hand use, tapping the vast majority of materials in through holed conditions..
Check Stock

EWK 5 Pcs Metric Lug Nut & Bolt Remover Extractor Twist Socket Set with Drift Punch Bar

  • 【 Wide Applications 】 EWK 5 Pcs Twist Socket Set meets a wide range of deep stubborn lug nut removal needs. Including 4 different twist sockets:....
  • 【 Tight Grip and Bite 】 Lug nut remover has plum-shaped internal thread to extract any heavily stripped nuts. The Spiral teeth provides excellent....
  • 【 Easy Removal 】 Simply use a hammer to hit the lug nut extractor socket onto the damaged nut, then select a 1/2 inch square hand tools to loosen....
  • 【 Quality Material 】 Made of high hardness CR-MO steel for superior durability. These broken bolt extractors have black oxide surface, enables....
  • 【 Excellent Support 】 Service and Quality guaranteed! EWK provides you premium quality tools with 12 months warranty. If there is any problem or....
Check Stock

Left Hand Drill Bit Set (10 pc, Silver & Gold), Metal Extractor Bits to Remove Stripped Broken Screws & Bolts w/Iron Storage Case by Mata1

  • HEAVY DUTY REMOVAL SET – These left-handed reverse twist extractors are USA-designed with clean steel technology, HSS strength & high HRC hardness.
  • Suitable for removing hardened, damaged, rusted & painted-over screws or bolts.
  • HARD & TOUGH – The hex shank extraction bits range in diameter from 3/32″ to 5/8″, while the lefthand drill bits range in diameter from 5/64″ to 19/64″ with 118-degree split points for high-speed drilling.
  • CARRY CASE – Ideal tool box to organize & hold the remover drill bits for any craftsman, dad, husband, boyfriend, or wife.
  • DRILL & REMOVE – Select bit size appropriate to the damaged screw/bolt.
  • Insert left-hand drill bit into drill & set drill to reverse.
  • Drill a hole about 1/16” deep into the screw/bolt.
  • Select corresponding extractor & use a mallet/hammer to pound it into the screw/bolt.
  • Use drill, wrench, or tap handle to thread the screw bolt out.
  • HANDY GADGETS – Mata1 is committed to provide lasting quality tools.
  • Mata1 reversible drill bit sets provide an assortment of sizes for removal of stuck bolts & screws.
Check Stock

ABN Spark Plug Thread Repair Kit, 14mm Reamer Cylinder Thread Repair Tool & Thread Insert – Spark Plug Rethreader Kit

  • REPAIR PLUGS: The ABN Thread Repair Tool Kit is a time-saving kit that allows you to cut threads to fix a stripped and damaged 14mm spark plug threaded hole port and repair plug configurations in aluminum heads.
  • Socket includes metal retainers to keep plug held inside during install and removal.
  • VARIOUS APPLICATIONS: Chrome-vanadium steel (CR-V) M14 x 1.25 internal thread size on repair sleeve suitable for damaged spark plug threads to clean and rethread spark plug ports on a BMW vehicle and some Nissan and Toyota engines.
  • As long as the head is aluminum and the spark plug hole is straight with room to turn the tap using either a ratchet or wrench, this kit will allow you to repair plugs without removing the head.
  • EASY TO USE: Rotate the crankshaft to make sure no ports/valves are open, use the tap to install new threads, choose the proper depth of insert, and screw it firmly into the newly tapped head.
  • Apply grease on the tap to help catch any metal shavings (rather than letting them drop into the cylinder) and back out the tap out every half turn to every whole turn to clean the metal shavings from the tap.
  • PERFECT SIZE: 14mm reamer with 12 points.
Check Stock

CASOMAN 5 Pieces 1/2'Dr. Twist Socket Set, Lug Nut Remover Tool Metric Bolt and Lug Nut Extractor Socket Tools

  • Manufactured from premium impact grade chrome molybdenum steel construction with corrosion-resistant black phosphate finish for durability..
  • 5 Pieces 1/2"Dr. twist socket set: 17mm, 19mm, 21mm and 22mm, include a 12mm drift punch nut removal bar.
  • The special internal thread design provides excellent torque to Increase grip and can be used to rotate fasteners with deep nails..
  • Easy to use, only need to use a hammer to hit the removal tool onto the damaged nut, then select the 1/2 inch square drive wrench to loosen the nut to remove these rusted nuts..
  • Come with a heavy duty blow molded storage case, easy to carry. Meets or exceeds ANSI performance standards. It comes with 1 year quality warranty..
Check Stock

CoCud Thread Milling Taps 1/4-32 UNEF Thread 2B High Speed Steel Machine 3 Straight Flutes Screw Threading Tool - Applications for Tapping Drilling Machine 1-Piece

  • ★ Wide Application --- For threading through holes or shallow blind holes. 3 straight flutes design, rapid downward chip removal. Make new female threads or re-thread damaged female threads in stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, plastic..
  • ★ Machine Taps --- Machine taps are used in tapping machines, vertical drilling and milling machines. M1-M3.5 micro taps process wood and soft metals with lower hardness, mainly used in clocks and watches. Drill holes with a twist drill before tapping..
  • ★ High Speed Steel --- The high speed steel tool has high hardness, high strength, good toughness, wear resistance, and heat resistance. Only the base substrate, without any additional coatings, good for a wide range of applications..
  • ★ Useful Tips --- Control speed based on material hardness. Add appropriate tapping oil for higher quality internal threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter (eg: diameter=6mm (M6), maximum tapping depth=9mm). The tapping angle should be 90 degrees vertical and stable..
Check Stock

ZKTOOL 14mm Cylinder Head Rethreaded Kit, Spark Plug Thread Repair Kit,14mm Reamer Cylinder Thread Repair Tool,Spark Plug Rethreader Kit,4 Thread Insert. M14 x 1.25

  • Choice: The thread repair tool kit is a tool for spark plug repair. This tool does not require any difficult operation and is suitable for everyone. For the convenience of use, you can add some thread locking agent, (Rethread Aluminum Heads Only)..
  • Advantages: Chrome vanadium steel (CR-V) 14mm 12-point threaded reamer with a total length of 2.5 inches and four 3/8-inch, 7/16-inch, 1/2-inch and 3/4-inch carbon steel blades. Compared with similar products, we have optimized the quality. Will not be easily damaged..
  • Operation: Repair and repair the chrome vanadium steel (CR-V) M14 x 1.25 internal thread size on the sleeve by cutting the thread, and repair the plug in the aluminum head. The socket includes a metal retainer for fixing the plug inside during installation and removal..
  • Packaging: The re-threading kit includes a tapping reamer and 4 blades of different sizes and depths for your convenience..
  • Service: We provide product package return and exchange service for a better customer experience. If you have any questions, please contact us, we are online 24 hours.
Check Stock

NOVINO Grease Zerk Fitting Tools Fits 1/4"-28 SAE,1/8"-NPT, M10x1 M8x1 and Grease Zerk Fittings with hex Size 3/8" 5/16" 7/16",Multi-Tool for Remove Install Rethread Damaged Broken Zerk Grease Fitting

  • ...rk kit---install,remove,re-tap holes( repair 1/8"& 1/4"-28 tap thread) and maintain zerk grease fittings .Make job more easier and save time..
  • Function 1---Remover and Installer. The silver sockets are grease fitting removal & install tool,used to removal damaged broken grease fittings OR install straight and angle grease zerk fittings( 30, 45, 65, 90 degree angles ).
  • Function 2---Thread Cleaner and Restorer.The black taps on the cross ends are grease fitting cleaning tool ,designed to clean out the threads of a clogged fitting and retreading repair correct fitting thread..
  • Wide use:Our grease zerk fitting tool kit is designed to meet requirements on tractor/loader/lawn mower/excavator/rotary mower/rotary cutter in most Agricultural, Industrial, Marine, Truck, Construction Equipment ,Automotive..
Check Stock

GREAT CLIPS Solutions Moisturizing Conditioner, 10oz |Repairs & Softens Damaged Hair | For Dry, Coarse, or Curly Hair

  • SOFTENS & REPAIRS HAIR: Solutions by Great Clips Moisturizing Conditioner is a rinse-out conditioner designed to help soften and restore luster in dry, coarse or damaged hair..
  • PROVIDES MOISTURE: Hydrate your hair! This conditioner is effective on hair damaged by chemical processes..
  • SMOOTHS & TAMES HAIR: This daily conditioner assists in taming unruly curls, frizz, and flyaways! Your hair will feel silky and smooth once again..
  • HOW TO USE: Apply to wet hair, leave in for 1 to 3 minutes and rinse. For optimum results, use in combination with Solutions Moisturizing Shampoo!.
  • RECOMMENDED FOR DAILY USE: Our conditioner is ideal for every day use in combination with Solutions Moisturizing Shampoo on hair that is naturally curly, dry or chemically damaged. It's also great for curly hair!.
Check Stock

kipa Diesel Fuel Injector Cup Sleeve Installation Removal Tool for 6.6L LB7 Chevy Duramax Engines 2001-2004.5

  • ...004.5 6.6L LB7 Chevy Engines. All hardware has been coated for rust resistance as well as a rockwell hardness of over 62 to ensure a long life.
  • Replace for OE Part Number J-45910, 7222, ST-193, 2386. KIPA Tool utilize the latest in metallurgical and coating technology it allows us to thread our removal tool into the damaged injector cup without creating any filings or chips to fall into your cylinders. The tool use bridges that are quickly fastened to the injector mounting holes..
  • Our design is engineered towards repeated shop use, and efficiently removing and installing the injector cups . Removing and installing the injector cups should be a surgical operation, not something requiring beating cups in with hammers and leaving brass filings from removing.KIPA designed our tools with tight clearances, and clean injector bores..
Check Stock

uxcell Metric Machine Thread Milling Tap M16 x 2 H2 Titanium Coated Ti-coated High Speed Steel 4 Straight Flutes Screw Thread Tapping Threading Machinist Repair DIY Tool

  • Thread Size: M16 x 2. High-speed steel metric taps offer high hardness and good toughness for wear resistance, fast cutting speed and long service life, well suited for general purpose applications..
  • The thread tap can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications..
  • Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction..
  • Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Metric Machine Thread Milling Tap M8 x 1.25 H2 Titanium Coated Ti-coated High Speed Steel 3 Straight Flutes Screw Thread Tapping Threading Machinist Repair DIY Tool

  • Thread Size: M8 x 1.25. High-speed steel metric taps offer high hardness and good toughness for wear resistance, fast cutting speed and long service life, well suited for general purpose applications..
  • The thread tap can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications..
  • Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction..
  • Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock