Top Damper Case

Lisle 54810 Master Harmonic Balancer Puller Kit

• The kit Includes a standard Harmonic balancer puller, pulling screws, adapters for 3300 and 3800 GM V6 engines, and a Harmonic damper pulley puller for Chrysler, GM, Mitsubishi, and Dodge.
• Includes new interchangeable puller jaws for 3.6L V6 Chevrolet Camaro and Dodge 5.7L Hemi.

Tailgate Damper Kit - Compatible with Ford F-150 2015, 2016, 2017, 2018, 2019, F-150 Raptor 2017-2019 - Replaces FL3Z-99406A10-A, FL3Z99406A10A - Tail gate Assist Shock Strut - Lift Support Kit

• Replacement Tailgate Damper Kit - This is a replacement for the tailgate damper accessory kit. The tail gate even being made of aluminum is really heavy especially when installed with more accessories like the tailgate step resulting to the tailgate dropping right out of the hands when opening. This kit safely lowers the tailgate in a slow and controlled manner..
• Compatible Replacement for Ford F150 - 2015 - 2019 F150 including Raptor Models with years 2017 and 2019 |. Having a tailgate assist when opening is a nice thing. Although some of the F-150s came with it as a factory option. Most did not. This kit installs seamlessly and hidden behind the tail lights..
• Replaces Part# FL3Z-99406A10-A, FL3Z99406A10A - This tailgate damper kit can be installed easily in the passenger side and will require you to remove two T50 bolts to remove and replace the roller. The damper shock or strut installs behind the passenger tail light and the angled part of the damper shock snaps into the mount from the bed while the straight part mounts into the new roller that came with the kit..
• OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement for the factory tailgate damper kit. Ensure that the tailgate harness under the t....

Duct Outlet 6\ Damper Sleeve w/ 1.5\ Stand-Off, 3/8\ Rod HVAC

• 6" Damper Sleeve w/ 1.5" Stand-Off, 3/8" Rod HVAC.
• 1½” Stand-Off for the locking Damper Handle.
• 20 Gauge Galvanized Damper Blade with 3/8" Rod.
• Crimped on one end to fit inside next ducting section.

Tamiya 86012 Paint Spray, Silver

Performance Tool W89712 Compact Harmonic Balancer Puller , Black

• Works on virtually all Chrysler, Mitsubishi and Dodge vehicles 1990 and later.
• GM and Cadillac 1988 and later, Ford 1995 and later with 3 spoke pressed on dampers.
• Jaw design provides greater strength, clevis pins allow jaws to be quickly removed and installed.
• Designed for removing damper pulleys in tight engine compartments, without removing the radiator.
• Blow molded case for easy storage and safe from loss.

Innovala PI164-GR25, 25PACK Pin Damper Soft Close Cabinet Door, 25 Pack, Aluminized ABS

• Mounts easily with only one screw into the cabinet corner on the hinge side.
• Only one unit needed for most applications. Surpass kcma requirements.
• Screw and mounting instructions included.
• No pilot hole drilling necessary. Comes with self-tapping screw.
• Note: Mount the damper on the side of the door where the hinge is mountedDescriptionOur product Innovala is a German manufactured soft closing damper for kitchen & bath cabinet doors. Innovalas damper program is an innovative product that has been sold to the us cabinet and retail industry since 2008. We have sold millions and have been copied many times. We are the exclusive wholesale and retail distributor for the north American market. Its very simple to install our Innovala soft close dampers. First you need to make sure that your cabinet hinges are self-closing. In order to find this out, just open your cabinet door a couple of inches and let it go. If your door closes it has self-closing hinges, if it does not close and stays open your cabinet hinges are not self-closing and not one soft close damper in the market will work. Now you need to find the right location to install the damper. Always use the top corner closest to the hinge. Our instal....

TFL3Z-99406A10-A ailgate Assist,Tailgate Damper Shock Assembly Kit ,Fits for Ford F-150 2015, 2016, 2017, 2018, 2019,Tailgate Assist Shock Strut,Lift Support Kit,Replaces# FL3Z99406A10A

• ...ailgate shock is precisely engineering designed with integrated shock absorber, which works with the existing tailgate cables to facilitate a slow, consistent and smooth lowering. No more slamming down tailgate,The tailgate shock assembly has went through extensive testing, means you will get a fairly reliable gate damper to control the drop rate of the gate to prevent harm to the vehicle body.This kit safely lowers the tailgate in a slow and controlled manner..
• ★ High Quality: Normal wear and tear from use is already an issue with tailgate damper kit, but bumpy roads and potholes can also grate on the alignment of your trucks gate as well. Made from high-quality and extensively tested stainless steel, this damper will not just protect your limbs from damage but will also save the integrity of your tailgate..
• ★ This tailgate damper kit can be installed easily in the passenger side and will require you to remove two T50 bolts to remove and replace the roller. The damper shock or strut installs behind the passenger tail light and the angled part of the damper shock snaps into the mount from the bed while the straight part mounts into the new roller that came with the kit..
• ★ 100% Satisfactory service, if you have any questions, please feel free....

Yoursme 77080 19mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder Removal Holding Spanner for Honda and Acura Engines

• 【19mm Harmonic Balancer Socket】Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications. Install/remove Honda 19mm damper....
• 【Using of 19mm Tool】OAL 89mm, Used with 1/2” square drive.Designed with more than 3 x the mass of standard impact sockets to reduce flex and....
• 【50mm Removal Holding Spanner】Fits for Honda (most) and Acura engines. Used to maintain the harmonic damper pulley position while....
• 【Using of 50mm Tool】Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating....
• 【Premium Support: 】Our focus on products and customer services is 2nd to none. We provide friendly 1 years’ warranty support, easy-to-reach....

Tamiya 56336 RC King Hauler Black Edition

Dundas Jafine DRB4XZW Recessed Dryer Vent Box, 4\

• Spring loaded damper system offers complete noise control with no flapping louvers or dampers during inclement weather.
• When the dryer, bath fan, or exhaust is turned on, the air forces the damper open allowing the air to exhaust..
• When appliance is turned off, the damper is pulled to a secure, closed position.
• UV resistant coating to prevent the cap from discoloring.
• Paintable to match the exterior of your home.

Draft Blocker 4 Inch - Backdraft Damper - Draft Stopper - Backflow Preventer - Vent Deflector (4'' Inch)

• Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
• Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC applications.
• INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
• The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
• Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ....

Backdraft Damper Galvanized Steel Inline Fan Vent with Spring-Loaded Folding Blades and 3 Pieces Duct Clamps for Ducting in Range Hoods and Bathrooms Fans 4 Inch

• Special design: backdraft damper has a smooth-running spring and an internal foam strip to keep the blades from rattling.
• Reliable materials: galvanized steel damper is made of quality galvanized steel, the flap leaves are made of aluminum, and the axis and spring are....
• Easy to install: the backflow flap is installed by inserting it into the ventilation pipe until it stops.
• Wide range of usages: these draft blocker set can be widely applied in ACs, exhaust fans, extractors, range hoods, heating ducts, vents and other....
• Package includes: the package comes with 1 piece backdraft damper and 2 pieces duct clamps.
• The backdraft damper is about 3.46 inches long, 3.9 inches....