Top Darkman Iii Die Darkman Die

Redding Competition Bushing 3-Die Neck Sizer Set 6.5 Creedmoor

  • Competition Bushing Sizing Die -- With this die, the cartridge case is completely supported and alig.
  • The Body Die -- is designed to full length resize the case body only and bump the shoulder position.
  • Competition Seating Die -- The bullet guide to seating stem fit is so precise that the seating stem.
Check Stock

Hornady Match Grade 2 Die Set, 6.5 Creedmoor (.264) (544655) - Caliber Specific Reloading Equipment for Handloaders with Full Length Sizer Die, Seating Die with Roll Crimp, Sure-Loc Rings, & Storage

  • Die Set for the Avid Reloader - hand crafted and polished for an unmatched finish, the Hornady Match Grade Die 6.5 Creedmoor Die Set 2-Die Set (.264) (544655) give you total control over neck tension when resizing. Tight tolerances at the press translate into tighter groups at the range..
  • Find the Match Grade Bushing Dies You Need - these precision dies give the handloader more control over the loading process. They feature self-centering, interchangeable neck sizing bushings, that are held to strict tolerances to provide superior accuracy to eliminate the chance of over-sizing your case necks and overworking the brass (not included with die).
  • Full Length Sizer Die - features precision-polished elliptical expander to reduce friction and case-neck stretch. The dimension of the bushing (inside diameter, listed) determines the neck size when the brass is inserted into the die.
  • Seating Die - features seater adjustment screw, built-in crimper, locking retainer spring as well as a floating bullet seater alignment sleeve and seating stem, which pre-aligns the bullet and case before seating occurs. Hornady Bushings work in both the neck and full length Match Grade dies. The bushings are available in .001" increments..
  • Precise Machining for Accurate Reloading - H....
Check Stock

NcSTAR NC Star VSTM3940GV3T, Mark III Tactical Compactx 40mm, Gen 3, Mil Dot Reticle

  • Fully multi-coated lens for a bright Crystal clear image quality.
  • Die cast aluminum body with powder coated tan body.
Check Stock

Hornady Match Grade 2 Die Set, 338 LAPUA MAG (.338) (544399) - Caliber Specific Reloading Equipment for Handloaders with Full Length Sizer Die, Seating Die with Roll Crimp, Sure-Loc Rings, & Storage

  • Die Set for the Avid Reloader - hand crafted and polished for an unmatched finish, the Hornady Match Grade Die 338 LAPUA MAGNUM 2-Die Set (.338) (544399) give you total control over neck tension when resizing. Tight tolerances at the press translate into tighter groups at the range.
  • Find the Match Grade Bushing Dies You Need - these precision dies give the handloader more control over the loading process. They feature self-centering, interchangeable neck sizing bushings, that are held to strict tolerances to provide superior accuracy to eliminate the chance of over-sizing your case necks and overworking the brass (not included with die).
  • Full Length Sizer Die - features precision-polished elliptical expander to reduce friction and case-neck stretch. The dimension of the bushing (inside diameter, listed) determines the neck size when the brass is inserted into the die.
  • Seating Die - features seater adjustment screw, built-in crimper, locking retainer spring as well as a floating bullet seater alignment sleeve and seating stem, which pre-aligns the bullet and case before seating occurs. Hornady Bushings work in both the neck and full length Match Grade dies. The bushings are available in .001" increments..
  • Precise Machining for Accurate Reloading - Hornady....
Check Stock

Hornady Custom Grade New Dimension 2-Die Set, 6.5 CREEDMORE (.264) (546289)- Caliber Specific Reloading Equipment for Handloaders with Full Length Sizer Die, Seating Die, Sure-Loc Rings, & Storage Box

  • Die Set for the Avid Reloader - hand crafted and polished for an unmatched finish, the Hornady Custom Grade New Dimension 2-Die Set for 6.5 CREEDMORE (.264) (546289) is necessary for each cartridge that you reload to decap, de-prime, resize, and seat/crimp the bullet.
  • Find the Custom Grade Dies You Need - these precision dies give the handloader more control over the loading process. Depending on the caliber of die set/alignment sleeve you are using, the Hornady Crimp/Seater Die will either "taper" or "roll" crimp your cases.
  • Full Length Sizer Die - features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This eliminates spindle slippage and makes tightening the spindle lock a breeze when making adjustments.
  • Seating Die - the floating bullet alignment sleeve and stem improve bullet seating and accuracy by pre-aligning the bullet and case before seating. The Hornady bullet seating die also applies a crimp to secure the bullet in the case.
  • Precise Machining for Accurate Reloading - Hornady reloading dies are designed for a true match to your chamber. Keep several appropriate Hornady die sets for each caliber size at your reloading bench. Includes a full length sizer die, seating die, plastic storage box, two Sure-Loc ri....
Check Stock

Lionel Racing Kevin Harvick 2019 Busch Harvick Beer 1:64 Nascar Diecast

  • 1: 64 scale die-cast action racing collectables measures 3" X 1.2" X 1".
  • Driver: Kyle Busch | sponsor: intersate batteries | model Year: 2019 | car Make: Toyota | car model: Camry.
  • Finish: Standard | Production Quantity: limited edition.
  • All 1: 64-scale die-cast will come on a base.
  • Each limited edition 1: 64-scale collectible die-cast includes manufacturer-specific engine detail, die-cast body, and detailed interior. Each 1: 64-scale collectible die-cast also features a dintm (die cast Identification number) for registration as well as a silver sticker with 1 of 0000 indicating production run size..
Check Stock

Williams B-52A 3/8-Inch Drive Round Head Ratchet

  • Adjustable Die Handle Round Die Stock Wrench Holder with adjustable screws. Suitable for making or repairing male and female threads. Good for general purpose applications..
  • Special Design: High-speed steel machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. With adjustable screws, the die stock can securely hold round dies..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads..
  • Measure the size manually. If the product you receive does not meet your needs, please contact us and we will do our best for you..
Check Stock

LEE PRECISION 90963 9-mm Carbide 4-Die Set Luger Grey

  • Includes Carbide Full Length Die, Bullet Seating Die, Powder Thru Expanding Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and....
Check Stock

RCBS 20515 Carbide Die Set 9MMLUGER/9x21/9x23,OD Green 9mm Luger

  • Carbide Die Sets consist of a Carbide Sizer Die, Seater Die, and Bullet Seater Plug.
Check Stock

Howards End

  • PRECISE MATING OF LOCK RING: Easy-to-use cross bolt connects the two ends of the ring instead of a traditional screw design that tightens directly into the threads of the die, resulting in a more precise mating of the lock ring threads to the die threads..
  • RELIABLE ALIGNMENT: Full size lock ring provides a more reliable alignment with no canting, and no damage to the die threads, which remain undamaged..
  • EASY ADJUSTMENT: Tightening or loosening the steel cross bolt screw requires only a 7/64″ Hex/Allen Key (not included)..
  • STANDARD FIT: The Forster Cross Bold Die Lock Rings fit standard 7/8″-14 thread dies from most manufacturers..
  • FOR FORSTER SEATER & SIZING DIE: Works with all Forster Products high-quality sizing and seater dies. The Forster DIE-G-10 is a direct replacement part for the lock rings on Forster sizing and seater dies..
Check Stock

Eagle Lights LED Headlight Upgrade for Triumph Street Triple, Speed Triple, and Rocket III

  • FITMENT: Fits on (97-10) Triumph Speed Triple, (97 - 2011) Triumph Street Triple, and (2005 - Current) Triumph Rocket III. Plug and play installation. No modifications are needed to install the LED headlight upgrade and 100% reversible..
  • GENERATION III LIGHT UPGRADE: Comes with two GENERATION III LED Headlights from Eagle Lights. Designed to fit on your Triumph. Over 6x the output over the stock headlight grants better rider visibility and the ability to see the road ahead of you that much clearer..
  • MORE POWER: At over 3800 Lumens, there is nowhere you can't go. With a wide angle of projection and a color temperature just north of 6000K, the road will be bright, easily visible and safe..
  • EAGLE LIGHTS LIFETIME WARRANTY - Our LED headlights are designed to outlast your bike! But should something go wrong, you are covered by the Eagle Lights Lifetime Manufacturer Warranty. The best warranty in the business! No hassle returns and no hassle warranty replacement..
  • EAGLE LIGHTS QUALITY - The original Eagle Lights 5 3/4" LED headlight. The Eagle Lights 8900 headlight uses high quality polycarbonate lens construction for extra durability and heat treated die-cast aluminum for the body. Powered by high output LEDs, it is the best and the brightest 5 3/4" LED ....
Check Stock

Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT

  • Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT.
  • ​​​A Tail Stock Tap Die Holder Should Be Among The First Accessories a Machinist Makes For His Lathe, Since Threading With A Hand Held Die Stock....
  • 3 Die Holders Are Interchangeable & Can Hold Die Sizes of 13/16" + 1" + 1-1/2"..
  • 3 Tap Holders Are Interchangeable & Can Hold Taps 0" to 1/4" + 1/4" to 1/2" + 1/2" to 3/4".
  • EXCLUSIVE - TAP AND DIE HOLDER SET - OTHER SIZE MT1 AND MT3 IN OUR SHOP !.
Check Stock