Top Dc Anvil Txs

Olympia Tools 9-Pound Cast Iron Hobby Anvil 38-789 , Gray

  • Premium Material 55 lbs: This cast iron anvil is made of drop-forged, high-rigid iron, which features strength and durability. Our anvil blacksmith with 209HB hardness can bear heavy blows. The solid base also keeps it sturdy..
  • Hole & Horn for Different Uses: The round horn of the blacksmith anvil can be used for flatting, bending, and shaping. And the hardy hole shows a good performance in accessories’ punching and twisting..
  • Polishing Treatment: With fully polished surface area, the round horn anvil is corrosion-proof and services long-lasting use through quenching treatment. And the spray coating effectively relieves the oxidation reaction..
  • Large Working Area: This anvil metal 55 lbs/25 kg forge has a 8.6 x 4.1 inch work surface, giving a large working area. The wide countertop and flat surface provide a smooth blowing..
  • Wide Application: The iron anvil is ideal for hammering, straightening, and for shaping workpieces. Metalworkers and smiths widely use it in any metal shop. It is excellent for riveting, flattening, forging, and forming metal..
Check Stock

Wireless HDMI KVM Extender, Wireless HDMI Transmitter and Receiver 1080P@60Hz up to 200m/656ft with HDMI Loop-Out and 5.8G Dual Antenna, 2xUSB for Keyboard/Mouse Streaming from Laptop, up to 8 RXs

  • ...rts users to remote control PC or laptop connected to the transmitter far away. Also with IR transmission for using remote to switch the channel for cable boxes, media players. HDMI Loop-out for extra screen on the transmitter..
  • [ ] Support 1 TX to 1 RX, 1 TX to 8 RXs, 8 TXs to 1 RXs. (SP mode for 1 to 1, 1 to many RXs, SW mode for many TXs to 1 RX). Features multiple receivers to transmitter, you can stream any contents to multiple HDTV displays. Note: Please contact seller for free customized solution if you do like to use more than one kit in same space..
  • [. ] After-sale services from Microfuture is just strong as the 5.8G & dual antenna works on the signal. Stable and reliable. The length is up to 656FT/200M in an open environment while the time we stand behind our products are at less 36 months. With life-time technical support and 24 hours message respond..
Check Stock

1 Inch Blacksmith Anvil Forge Hardy Tool Set, Including Hot Cut Tool, Creasing Tool Stake, Bottom Fuller, Turning Bending Scrolling Fork

  • 【Creasing Tool Stake】Coated with blacksmith's hot wax for ultra protection and durability, fits 1 inch Hardy hole of an anvil or can be used in a vice. Perfect for while blacksmiths doing repetitive work keeping consistent, like knife making, leaf, armor, etc..
  • 【Hot Cut Tool】Designed a sharp and hard edge along the top, used in the anvil or clamped in a vise to cut hot metal. Place orange/red hot metal or iron bars over the edge and strike with hammer, it can cut most of the way through and prevent flying hot metal, avoiding damage to the face of a hammer or anvil..
  • 【Turning Bending Scrolling Fork】Used to bend fork in an anvil or in a vice. Perfect for making "S" hooks, bending medium stock and most scroll work. This tool allows you to get leverage for manually bending metal pretty quick and effective with a hammer or bending wrench..
  • 【Bottom Fuller】Used in anvil or clamped in a vise to shape metal. Use a hammer to work from the top while the hardy tool works from the bottom. This provides you different anvil surfaces and edges to work with. Designed square shank fits the square hole in the anvil and prevent rotation..
  • 【Professional-Grade Steel Hardy Tools Set】Forged of quality & heavy-duty steel, can withstand very high temperature, ....
Check Stock

Happybuy Single Horn Anvil 55Lbs, Cast Iron Anvil Blacksmith Withstands Heavy Blows,Anvil Rugged Round Horn Anvil Blacksmith Jewelers Metalsmith Tool, for Sale Forge Tools and Equipment

  • Premium Material 55 lbs: This cast iron anvil is made of drop-forged, high-rigid iron, which features strength and durability. Our anvil blacksmith is hard enough to bear heavy blows. The solid base also keeps it sturdy..
  • Hole & Horn for Different Uses: The round horn of the blacksmith anvil can be used for flatting, bending, and shaping. And the hardy hole shows a good performance in accessories’ punching and twisting..
  • Polishing Treatment: With fully polished surface area, the round horn anvil is corrosion-proof and services long-lasting use through quenching treatment. And the spray coating effectively relieves the oxidation reaction..
  • Large Working Area: This anvil metal 55 lbs/25 kg forge has a 8.1 x 2.7 inch work surface, giving a large working area. The wide countertop and flat surface provide a smooth blowing..
  • Wide Application: The iron anvil is ideal for hammering, straightening, and for shaping workpieces. Metalworkers and smiths widely use it in any metal shop. It is excellent for riveting, flattening, forging, and forming metal..
Check Stock

SmarketBuy 66 LBS Steel Anvil Blacksmith Single Horn Anvil Forged Rugged Steel Anvil with Holes for Metal Forming Jewelry Making Work Surface Bench Tool (66LBS)

  • Premium Material 88 lbs: This steel anvil is made of drop-forged, high-grade steel, which features high hardness, strength, and durability. Our steel anvil blacksmith has excellent grade material of 50 HRC. The solid base also keeps it sturdy..
  • Holes & Horns for Different Uses: Round horn and the flat horn of the anvil blacksmith are used for smoothing, bending, and shaping. And the hardy hole and pritchel hole can show a good performance in accessories’ punching and twisting..
  • Polishing Treatment: With fully polished surface area, the blacksmith anvil is corrosion-proof and services long-lasting use through quenching treatment. And the spray coating effectively relieves the oxidation reaction..
  • Large Working Area: This anvil metal 88 lbs/40 kg forge comes with a comfortable and wide work surface, giving a large working area. The wide countertop and flat surface provide a better user experience. It can also bear a long time thumping..
  • Wide Application: The anvil is ideal for hammering, straightening, and for shaping workpieces. It is widely used by metalworkers and smiths in any metal shop. It is excellent for riveting, flattening, forging, and forming metal..
Check Stock

LEGO DC Super Hero Girls Eclipso Dark Palace 41239 Building Kit (1078 Piece)

  • Features a foldout palace, opening tubes to hold LEGO DC Super Hero Girls characters, powering station, planning room, vanity cabinet, weapons cabinet, a Kryptomite creation section.
  • Includes 3 mini-doll figures: Wonder Woman, Eclipso and The Flash, plus 3 orange Kryptomite figures.
  • Accessory elements include a staff, sword, flail, sai, Wonder Woman's Lasso of Truth, Wonder Woman's shield, laboratory bottles, lipstick, brush, perfume bottles, pickaxe, hammer, anvil, and crystals.
  • Eclipso Dark Palace measures over 14in (36cm) high, 10in (27cm) wide and 5in (14cm) deep.
Check Stock

Happybuy Single Horn Anvil 66Lbs Cast Steel Anvil Blacksmith for Sale Forge Tools and Equipment Anvil Rugged Round Horn Anvil Blacksmith Jewelers Metalsmith Blacksmith Tool

  • [FULLY POLISHED] This Iron Anvil has fully polished surface area, The flat surface has been ground to a great finish, and the rest of the anvil was dipped in a protective paint/enamel. It's a great tool for crafting small stuff like silversmithing..
  • [EXTRA LONG]This Single Horn Anvil extra Long shaping horn design and the polished surface Top size : 11" x 4-5/8"(279.4x117.5mm), Base size: 10" x 7"(254x177.8mm),machined hardy holes with four anchor points.Rounded horn for smooth bending and shaping.Perfect balance, size and weight. Excellent size for craft projects..
  • [PERFECT FOR FORGING WORK] Many of the perks to having this anvil has been better reliability without the lack of mobility..
  • [MULTIFUNCTION]Rounded horn for smooth bending and shaping, Hardy hole for accessories, punching and bending.Clamped or bolted to the work bench to hold it still and it works just fine..
  • [WIDE APPLICATION]This anvil is great for metal-smiths, riveting, flattening, forging and forming metal,ideal for any handyman or hobbyist.This is a good mid sized anvil for most small to middle sized Jobs..
Check Stock

ZELCAN 66lbs Single Round Horn Anvil Blacksmith for Sale, Tools and Equipment Anvil Rugged Round Horn Anvil Blacksmith Jewelers Metalsmith Blacksmith Tool with Polished Surface

  • Premium Material 44 lbs: This steel anvil is made of drop-forged, high-grade steel, which features high hardness, strength, and durability. Our steel anvil blacksmith has excellent grade material of 50 HRC. The solid base also keeps it sturdy..
  • Holes & Horns for Different Uses: Round horn and the flat horn of the anvil blacksmith are used for smoothing, bending, and shaping. And the hardy hole and pritchel hole can show a good performance in accessories’ punching and twisting..
  • Polishing Treatment: With fully polished surface area, the blacksmith anvil is corrosion-proof and services long-lasting use through quenching treatment. And the spray coating effectively relieves the oxidation reaction..
  • Large Working Area: This anvil metal 44 lbs/20 kg forge comes with a comfortable and wide work surface, giving a large working area. The wide countertop and flat surface provide a better user experience. It can also bear a long time thumping..
  • Wide Application: The anvil is ideal for hammering, straightening, and for shaping workpieces. It is widely used by metalworkers and smiths in any metal shop. It is excellent for riveting, flattening, forging, and forming metal..
Check Stock

Bonbo 5PCS Blacksmith Anvil Hardy Tool Set 1 Inch Hot Cut Tool, Creasing Stake Tool, Bottom Fuller, Turning Bending Scrolling Fork, Bending Forge Scrolling Welding Jig

  • Hot Cut Tool: Used in the anvil or clamped in a vise to cut hot metal. To place orange/red hot steel over edge and strike with hammer. Cuts through hot steel pretty quick. Cut most of the way through, then break the piece off to prevent flying hot metal..
  • Creasing Tool Stake: Fits in a 1 inch Hardy hole in an anvil, or can be used in a Vice. Two piece of bar stock weld it together on a stand. This is used for doing creases in metal. You can put the metal on the tool and use a chisel to drop the metal down into the slot. Perfect for while blacksmiths doing repetitive work keeping consistent, like knife making, leaf, armor, etc..
  • Bottom Fuller Tool: Used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with. Square shanks fit the square hole in the anvil and prevent rotation..
  • Turning Bending Scrolling Fork: Used to bend fork in an anvil or in a vice. Used to bend heated steel, quickly forming the curved shape you want. Perfect for making "S" hooks, bending medium stock and most scroll work. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench..
Check Stock

AIMIBO HDMI Wireless Transmitter and Receiver 4K, USB C & HDMI Dual Transmit Ports, HDMI & VGA Dual Screens, 2.4/5Ghz Streaming Smooth Video/Audio for Mac, Cable Box, Samsung Phone, Netflix, 165FT

  • 【165FT LONG RANGE TRANSMISSION】Our wireless HDMI extender can transmit uncompressed HDMI video/audio up to 165FT/50M line of sight (LOS) range in 0.1s latency. 【NOTE】The transmission distance will be shortened to 30ft/10m when cross a solid wall. 【1 RX TO 8 TXs】The wireless HDMI adaptor allows connect up to 8 TXs simultaneously, switching the screen by clicking TX's button..
  • 【WIDE COMPATIBLE】The wireless HDMI transmitter and receiver is compatible with Linux, Windows, Mac, iOS, Android or other HDMI enabled devices. You can mirror smooth movies, live TV, games, presentation from Macbook, laptop, PC, cable box, Roku, camera, Blu-ray, DVD, phone, tablet to monitor/TV/projector..
Check Stock

Happybuy Single Horn Anvil 22Lbs Steel Anvil Blacksmith for Sale Forge Steel Tools W/ Round and Square Hole and Equipment Anvil Rugged Blacksmith Jewelers Durable and Robust Metalsmith Tool

  • [FULLY POLISHED] This Iron Anvil has fully polished surface area, The flat surface has been ground to a great finish, and the rest of the anvil was dipped in a protective paint/enamel. It's a great tool for crafting small stuff like silversmithing..
  • [EXTRA LONG]This Single Horn Anvil extra Long shaping horn design and the polished surface Top size : 11" x 4-5/8"(279.4x117.5mm), Base size: 10" x 7"(254x177.8mm),machined hardy holes with four anchor points.Rounded horn for smooth bending and shaping.Perfect balance, size and weight. Excellent size for craft projects..
  • [PERFECT FOR FORGING WORK] Many of the perks to having this anvil has been better reliability without the lack of mobility..
  • [MULTIFUNCTION]Rounded horn for smooth bending and shaping, Hardy hole for accessories, punching and bending.Clamped or bolted to the work bench to hold it still and it works just fine..
  • [WIDE APPLICATION]This anvil is great for metal-smiths, riveting, flattening, forging and forming metal,ideal for any handyman or hobbyist.This is a good mid sized anvil for most small to middle sized Jobs..
Check Stock

Happybuy Single Horn Anvil 110Lbs Cast Steel Anvil Blacksmith for Sale Forge Steel Tools W/ Round and Square Hole and Equipment Anvil Rugged Blacksmith Jewelers Durable and Robust Metal Working Tool

  • Premium Material 110 lbs: This steel anvil is made of drop-forged, high-grade steel, which features high hardness, strength, and durability. Our steel anvil blacksmith has excellent grade material of 50 HRC. The solid base also keeps it sturdy..
  • Holes & Horns for Different Uses: Round horn and the flat horn of the anvil blacksmith are used for smoothing, bending, and shaping. And the hardy hole and pritchel hole can show a good performance in accessories’ punching and twisting..
  • Polishing Treatment: With fully polished surface area, the blacksmith anvil is corrosion-proof and services long-lasting use through quenching treatment. And the spray coating effectively relieves the oxidation reaction..
  • Large Working Area: This anvil metal 110 lbs/50 kg forge comes with a comfortable and wide work surface, giving a large working area. The wide countertop and flat surface provide a better user experience. It can also bear a long time thumping..
  • Wide Application: The anvil is ideal for hammering, straightening, and for shaping workpieces. It is widely used by metalworkers and smiths in any metal shop. It is excellent for riveting, flattening, forging, and forming metal..
Check Stock