Top Dc Clamp Meter For Automotive

Fluke 773 Advanced Milliamp Process Clamp-Meter

  • Digital clamp-meter for 24V loop circuits measures DC to 100mA via clamp and to 24mA in circuit, and DC voltage to 30V.
  • Meter can source and simulate DC signals from 4 to 20mA, can source DC voltage signals up to 10V, and is accurate to 0.2% with a resolution of 0.01mA.
  • Clamp with 4.5mm (0.177 inches) jaw opening measures current without touching or interrupting the circuit, and is for use in hard-to-reach applications.
  • Built-in 24V loop power supply to power a transmitter and measure its milliamp output signal.
  • Meets EN and IEC safety standards 61010-1 and 61010-2-032.
Check Stock

OWON Current Clamp Meter Multimeter CP-05+ Clamp Current Probe 200KHz 400A for Oscilloscope 4A 40A 200A 200-400A Test Range with BNC Connector

  • ...l, switch the current clamp on (power LED should light) and then clamp the jaws around the current carrying conductor as shown. Typical Uses The AC/DC Current Probe simply offers the best value for money without compromising resolution..
  • ¡¾Multiple Test Ranges¡¿The OWON CP-05+ current clamp is ideal for use with automotive oscilloscopes for measuring currents between 1 mA and 400 A. Various current test range, 4A, 40A, 200A, 200-400A test range are available.Low noise level, and high detection accuracy..
  • ¡¾Easy to Use¡¿The current clamp has range selection settings, set by a slider switch on the handle of the probe. In use there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No electrical contact is required. These current clamps have been designed for use with oscilloscopes..
  • ¡¾Portable¡¿Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your AC/DC Current Probe. Auto zero at power on, relative zero correction .Low noise level, and high detection accuracy. 100% money back guarante....
Check Stock

CAMWAY Portable Clamp Meter Digital 6000 Counts AC/DC Current TRMS AMP OHM Tester Capacitance Multimeter with Alligator Clips

  • 【Auto/Manual Ranging & NCV】 The 6000counts Meter Automatically Select Appropriate Decimal Point Place.
  • NCV Detects Existence of AC voltage on....
  • 【Clamp Measuring】 Clamp Jaw up to 28mm, Clamp Meter Measures AC Current without Interrupting Circuit, Makes it Much Safer to Use on Mains Cables....
  • 【True RMS Multi-purpose Clamp Meter】 AC/DC Current, Accurate AC/DC Voltage , Frequency, Duty Cycle, Diode, Temperature Test,Capacitance and....
  • 【Continuity Test & Overload Protection Display】 Low Voltage Indication & Overload Protection Designed , Safely Accurately Confirm the Circuit....
  • 【Convenient to Use】 Meter size 210×110×45mm Portable . High Resolution , Low Battery Display. Large Backlit LCD Screen Improves Visibility.....
Check Stock

Wireless Bluetooth Clamp Meter, INFURIDER YF-7200APP 6000 Counts Auto-Ranging Digital Voltmeter Ammeter Measures DC AC Volt Amp Ohm Clamp on Multimeter with Capacitance,Temp,Diode Tester

  • 【True RMS Clamp Meter】This ac dc clamp multimeter can accurately measure AC/DC Voltage,AC/DC current(60A/400A) has resolution up to 0.01A.Also can provide resistance,capacitance,temperature,diode,continuity,frequency(Hz) and duty cycle measurement..
  • 【Bluetooth Voltmeter Ammeter】YF-7200APP clamp meter can be easily and automatically connected to your Android/IOS.Convenient viewing of voltage amperage ohm readings on a smartphone or tablet via AiLink app(within 15m).Moreover, you can download files or charts to monitor,log and analyze..
  • 【Easy to Use】Press the [HOLD] button over 2 seconds to turn on LCD backlight screen and brightness flashlight.It’s possible to read and record the value easily in darkness.The volt amp meter feature with data hold,low battery indication.Compact and portable design make the amperage meter easy to carry and use..
  • 【NCV Function】Our clamp on multimeter with non contact voltage function,can detection effectively check electrical status through measuring without touching any wires.Light and sound alarm if detects AC voltage 90-1000V or live wire.Easy to use for troubleshooting your....
Check Stock

INGCO Auto Ranging Digital Clamp Meter TRMS 6000 Counts Measures AC/DC Voltage to 600V AC/DC Current to 600A Resistance Capacitance Diode Test Temperature Multimeter

  • WIDE RANGE OF TESTS. INGCO TRMS auto ranging clamp meter meets your different needs for measuring, including AC/DC voltage, AC/DC current, resistance,....
  • EASY TO USE. The backlight changes to orange when volt > 80V or current > 3A with dual readings.
  • Flashing light helps place the probes to correct....
  • PROFESSIONAL MULTIMETER. Automatic range turntable design and NCV non-contact measurement. The low pass filter (LPF) ensures accurate drive output....
  • ALL ON ONE DEVICE. 100mF large capacity. INGCO clamp meter can be used as clamp meter as well as capacitance meter. 100mF equals 100000μF. It's....
  • WORRY-FREE ORDER. If you are not 100% satisfied with our clamp meter, we offer you 90 days refund or replacement. If you have any problem, please....
Check Stock

Southwire CLAMP Meter MAINTPRO 23030T

  • PROFESSIONAL DEVICE: The Southwire MaintenancePRO 23030T clamp meter is a rugged high end AC and AC/DC 1000A clamp meter for the serious electrician..
  • FUNCTIONALITY: The MaintenancePRO 23030T Clamp meter has 10 Measuring functions along with a powerful LED work light..
  • ENHANCED FEATURES: Added features like an easy to read 6,000 count backlit display and a built in non-contact AC voltage detector makes the 23030T the....
  • SAFETY AND INDUSTRY APPROVAL: With a UL listed safety rating of CAT IV 600V/CAT III 1000V, these clamp meters are built to get the tough jobs done..
  • WHAT’S IN THE BOX: MaintenancePRO 23030T Clamp meter, Test leads, Type K temperature probe with banana plug adapter, Carrying case and a 9 volt....
Check Stock

Inrush Current Clamp Multimeter, BTMETER BT-570N TRMS 5999 Display Clamp-on Amp Meter for AC/DC Voltage Amperage Ohm Temperature Test

  • ✅TRUE RMS CLAMP ON MULTIMETER - 6000 Counts accurately measures AC DC current to 1000A , voltage , resistance, capacitance, frequency, duty cycle. Even more testing on Temperature (℃/℉), Inrush Current, Continuity test with buzzer, Diode test..
  • ✅BOTH AC/DC CLAMP-ON AMMETER - High resulotion, True RMS allows you get accurate measurement regardless of waveforms. Relative mode for Capacitance, DC Inrush, Zero out for lower amps measurement, data hold, max/min, auto power off, polarity and low battery indicator..
  • ✅SAFE AND EASY TO USE - Overload protection on all ranges. Use this clamp amp meter for unidentified wire testing, Contactless amperemeter test for amperage, Avoid electric shock without touching any wires..
  • ✅HIGH ACCURACY AMPERAGE METER - 0.1 amp resolution for AC DC Amps measurement for 200A, 1A amp resolution for 1000A. Ideal inrush clamp meter for troubleshoot electrical mechanical problem of cars motors boat HVAC household appliances safely and accurately..
  • ✅LARGE DIGITAL DISPLAY - Well built with backlit LCD for visibility in dimly light areas. Extensible t....
Check Stock

Extech MA445 True RMS 400A AC/DC Clamp Meter with NCV

  • ▲Fast and Accurate AC / DC Ampere Clamp Meter : utomatic clamp multimeter, can measure AC / DC current, AC / DC voltage, resistance, capacitance, on-off, temperature, diode and frequency (Hz).
  • A perfect troubleshooting tool that will help you solve electrical problems in the car or at home quickly and safely.
  • ▲Contactless Voltage Detection : When AC voltage is detected, a visible LED lights up and emits a beep.
  • The multimeter's flashlight will only glow when the current is being tested.
  • ▲Overload Protection : Overload protection and double insulation protection prevent electric shocks and protect users from hazardous areas.
  • ▲Versatile and Easy to Read : a large, high-resolution LCD with large backlighting ensures better visibility in dark work areas.
  • ▲The "Return to Zero" Function : reduces data errors affected by the earth's magnetic field and helps you get more accurate measurements.
  • ▲Automatic Sleep Mode : After 30 minutes of inactivity, it automatically switches to sleep mode to save energy.
  • ▲Low Power Indicator : When the clamp meter is in a low battery state, the LCD display of the clamp meter will display a low battery symbol to remind you to replace the battery.
  • ▲Fixed with Free Additional Test Lead : free battery and test lead, ever....
Check Stock

INFURIDER Digital AC/DC Volt Amp Clamp Meter,Wireless Bluetooth Auto Ranging 1000A Ammeter Clamp Multimeter for Voltage,Current,Ohm,Cap,Temperature Tester

  • ⚡【AC/DC Clamp Meter】: The highly sensitive AC DC volt amp clamp multimeter feature with TRMS 6000 counts auto-ranging, be able to accurately measure AC/DC voltage,AC/DC current to 1000A,resistance,capacitance,diode,temperature(℃/℉),Hz,continuity buzzer test,etc..
  • ⚡【Remote Display Via Bluetooth】：Scan the QR code and download the APP first.The wireless Bluetooth digital clamp multi-tester will auto connect with your smart phone in the AILink app(within 15m).Which convenient for you to monitor,log and analyze the max/min/current of volt amp ohm in real time..
  • ⚡【Safety & Protection】：The amperage meter with rubber sheeve to protect your volt meter from being broken by fallen. Overload protection is up to standard of CATⅡ1000V or CATⅢ600V in all range.Non-contact voltage(NCV) function can detect voltage without touching any wires and avoid electric shock ..
  • ⚡【Easy to Operation】：The True-RMS voltmeter ammeter with large backlight display,you can read and record the value easily in darkness.Feature with data hold,low battery indication,auto range function.Press “REL” will show the relative testing and zeroing the clamp tester to obtain more accurate measurement..
  • ⚡【Accurate Current Meter】The AC DC Current measureme....
Check Stock

Digital AC DC Inrush Current Clamp Multimeter 6000 Counts TRMS Auto Range DMM Meter for AC/DC Volt Amp Ohm Temp Duty Hz Multi-Tester for Voltage Current Resistance Capacitance ANNMETER AN-570N

  • ▶【AC & DC Clamp Amp Multimeter】-DC voltage 0.1mV~1000V.
  • ▶【Multifunction Avometer】The 6000 Counts True RMS Clamp Voltmeter support Data hold, Max/Min, Relative Value, Automatic shutdown, ℉/℃....
  • ▶【Large Jaw Design】 The Clamp Meter can measure the AC Current in a conductor up to 42mm(1.65inch) without interrupting the circuit.To measure....
  • ▶【Inrush Amps Meter】 Press "REL" key for 2 seconds to enter the inrush current measurement mode, helps you know the peak current for starters,....
  • ✅【Extended 12 Months Quality Warranty】The clamp-on amp meter can check both AC & DC amperage without breaking wires. IEC1010 CAT III 1000V rated....
Check Stock

Rejuvenation

  • 【High Performance】AVID POWER auto-ranging 6000 counts digital clamp multimeter is ideal for accurate measurement of AC/DC voltage, AC/DC current,....
  • 【Multifunction】This AMP clamp meter features NCV testing and detecting function with backlight alarm, Auto power off, Low battery indication, Data....
  • 【Safety Compliance】Meeting IEC 61010-1, CAT. III 600V, CE standard. High Voltage Protection.
  • 【Easy to Use】You can measure current by clamping the meter around one of the wires(be sure not the whole power cord, otherwise the multimeter....
  • 【What You Would Get】1*Durable Clamp Multimeter, 2*Probe Pens, 1*K Thermocouple, 2*1.5 V Batteries, 1*Tool Bag, 1*English User Manual and 24H....
Check Stock

allsun Automotive Dwell Meter Digital Multimeter Autoranging TRMS 5999 Counts ACA/DCA Max.20A for RPM Dwell Angle Pulse Width Tach Temperature Duty Cycle Data Hold Test,Meter to PC

  • 【VERSATILE MULTI-FUNCTION DIGITAL MULTIMETER】Dwell Meter RPM Automotive accurately measures AC DC Amperage to 20A, AC DC Volt to 750V~1000V, AC DC Ohm to 60MΩ, Capacitance to 4000μF, Temp -4~1832℉, Frequency 9.999MHz, Duty Cycle 0.5%~99.9%, Dwell Angle 3/4/5/6/8 Cylinder Switchable, 0.5ms~20.0 ms pules width, 2-stroke engine(60~20000RPM),4-stroke engine(120~20000RPM) Tachometer etc.Test..
  • 【MEASURING THE ESSENTIAL INFORMATIONS】The Tachometer Meter performs standard automotive-specific tests for on-car and on-bench troubleshooting,such as RPM, dwell angle and pulse width cycle, relative measurement, data hold, back light, low battery indication, over range indication. It is an ideal measurement tool for automotive repair and service personnel..
  • 【FULL AUTO METER&HAND FREE】The tach and dwell meter defaults to autorange in measurement functions which have both autorange mode and manual range mode.When the meter is in autorange mode, "AUTO" is display. Auto back-light, and auto shutdown function make it easier to troubleshoot the automotive and electrical problems. Magnetic attachment on metal surface, Hanger, Kickstand to set your hands free..
  • 【METER-TO-PC COMMUNICATION】Dwell tach meter, you can use the supplied data cable and the communi....
Check Stock