Top Dc Power Support

DC Power Pigtails Cable,3FT DC 5.5MM x 2.1MM Male Plug to Bare Wire Open End Power Wire Supply Repair Cable,16 AWG Barrel Connector Pigtail for CCTV Security Camera,DVR,LED Strip Light Etc-2 Pcs(M)

  • DC 5521 power supply repair cable5.5mm x 2.1 mm DC power supply male repair cable is widely used for worn or damaged power cords, such as 12V 24V DC power supply equipment,LED light strips, CCTV security surveillance camera systems or low voltage application systems,etc..
  • DC Power Pigtails Cable is Safe and fastThe end of the cable is black and red to indicate the polarity. Pure copper wire can provide faster and more stable conductivity, which can be better connected to other equipment. (DC 5521 male plug corresponding cable:red to inside, black to external).
  • 16AWG DC cableDouble 1.5mm copper wire, thicker wire diameter than 18AWG, allowing higher current equipment to pass (Does not support data transfer).
  • 3FT DC5521The DC power cord is 1m long (about 3FT), which is enough to complete most of the projects. It can also be cut as required. The double-layer PVC insulation layer is safer and corrosion-resistant. It can also be bent as needed and is very flexible..
  • Easy to useThe end of the DC5521 power cord has been pre-stripped and tin-plated, which is easy to solder and install,connect..
Check Stock

Apevia ATX-PR1000 Prestige 1000W 80+ Gold Certified, ROHS Compliance, Active PFC ATX Gaming Power Supply

  • Apevia ATX-PR1000 Prestige 1000W 80 Plus Gold Certified & RoHS Compliance Active PFC ATX Gaming Power Supply..
  • Supports Dual /Quad/Multi-Core CPUs. Supports Single 12V Output for Higher Power Usage.
  • DC to DC Converter Design, Provides Superior Dynamic Response, Greater Sytem Stability and Maximizes the 12V DC Rail OutputMulti-GPU Technologies Supported.
  • 6 Pin and 8 Pin PCI-E Connectors Support all GPU Platforms. Built in 1 x Auto-Thermally Controlled Black 135mm Fan.
  • Connectors:1 x 20/24pin Main Power, 1 x 4/8pin 12V, 2 x PCI 6+2pin, 7 x SATA, 4 x Peripheral. Heavy-duty protections, including OVP (Over Voltage Protection), OPP (Over Power Protection), SCP (Short Circuit Protection).
Check Stock

DC Power Pigtails Cable,3FT DC 5.5MM x 2.1MM Female Plug to Bare Wire Open End Power Wire Supply Repair Cable,16 AWG Barrel Connector Pigtail for CCTV Security Camera,DVR，LED Strip Light Etc-2 Pcs F

  • 【DC 5521 power supply repair cable】5.5mm x 2.1 mm DC power supply female repair cable is widely used for worn or damaged power cords, such as 12V....
  • 【DC Power Pigtails Cable is Safe and fast】The end of the cable is black and red to indicate the polarity. Pure copper wire can provide faster and....
  • 【16AWG DC cable】Double 1.5mm² copper wire, thicker wire diameter than 18AWG, allowing higher current equipment to pass (Does not support data....
  • 【3FT DC5521】The DC power cord is 1m long (about 3FT), which is enough to complete most of the projects. It can also be cut as required. The....
  • 【Easy to use】The end of the DC5521 power cord has been pre-stripped and tin-plated, which is easy to solder and install,connect..
Check Stock

VONETS 2.4GHz WiFi Module/Mini Router/WiFi to Ethernet Bridge/Hotspot Signal Repeater/Extender/Amplifier/AP, USB/DC Powered with 2 RJ45 Ports for DIY Industrial Engineering Network Device VM300-H

  • 【WiFi to Ethernet or Ethernet to WiFi convert】Industrial Mini 2.4GHz WiFi Module/Mini WiFi Router/Wireless Ethernet Bridge/Repeater (small size).
  • Can achieve WiFi to Wired or Wired to WiFi function.
  • Support WiFi 802.11b/g/n, WiFi rate:300Mbps.
  • 2 Ethernet ports 10/100Mbps adaptive (USB/DC power supply cable.
  • 【Support wide voltage】DC5V-15V(Typical 5V/1A, ripple less than 100mV), two-stage automatic overvoltage protection (Protection voltage upper limit 15.5V), USB or DC optional powered mode.
  • the suggestion is: this device cannot use the USB or DC directly plugged into the computer for power supply, it needs to be powered by an independent standard 5V/1A power supply..
  • 【Support two kinds of application methods】: Router mode.
  • WiFi Bridge ( IP layer or MAC layer transparent transmission).
  • WiFi Repeater (WiFi signal repeater), can extend WiFi transmission distance.
  • 【WiFi hotspot automatic reconnection】two hotspot matching methods: Full match authentication mode, SSID and password authentication mode, Support SSA signal strength detection reporting function, motion detection function and memory hotspot(Up to 100) automatic matching connection fu....
Check Stock

Segotep 750W Power Supply, PCIe 5.0 Full Modular 80 Plus Gold PSU ATX 3.0 Gaming Power Supply, 12VHPWR Cable, Silent Fan

  • ATX 3.0 & PCIe 5.0 Ready: The PSU can hold up to 200% total power excursion & 300% GPU power excursion, it is more stable and secure than traditional ATX 3.0 power supply..
  • 80 PLUS GOLD Certified: The 750 Watt Power Supply 80 Plus Gold provides ultra-high power efficiency of 91.8% at typical load, reducing heat in your computer's system and prolonging its life..
  • Fully Modular Cable Design: The fully modular power supply allows use of only the cables you need for reduced system clutter and improved air flow..
  • Native 12VHPWR Cable: It can generate up to 600W of power to PCIe 5.0 graphics cards, DC-DC structure, Full Bridge LLC resonance assist, 12V synchronous rectification provide stable & safe output..
  • Graphics Cards Support: It comes with 2x PCIE 4.0 ports support NVIDIA RTX 20/30 Series and AMD graphics cards, 1x PCIE 5.0 port support NVIDIA 4080/4070Ti graphics cards..
Check Stock

3 Axis CNC Kit Nema23 Stepper Motor Dual Shaft 425oz-in 112mm 3A & Driver 40VDC 4A 128 microstep for CNC Router Milling Engraving Machine

  • ♞【Product】3 Axis nema23 stepper motor driver usbcnc controller kit.
  • ♞【Nema 23 Stepper Motor】 Nema 23 Stepper Motor / Holding Torque: 425oz-in,280Ncm / Motor Size:57x57x112mm / Phase:2 / 4pcs lead wire / 1.8 Step.
  • ♞【Stepper Motor Driver】FMD2740C Stepper Motor Driver / 4Amps / Support voltages:12 to 50V DC / 128microstep.
  • ♞【4 Axis USBCNC breakout board】 Come with Hand Control with USB Cable / Only support USBCNC software / input voltage: 15-36V DC..
  • ♞【DC Power Supply】400W 36V 11A DC Switching power supply.
Check Stock

Champion Power Equipment 100593 3276-Wh Power Station 3200/1600-Watt Portable Lithium-Ion Battery Solar Generator

  • Long Lasting: Li-ion advanced battery technology delivers fade-free, clean power plus no engine means no emissions, no noise, and you can use it inside.
  • Wall and Solar Charging: Charge your power station via AC power, DC power, or eco-friendly solar (panels not included) with as little as a 4.6-hour charge time (AC + DC).
  • Expandable: Chain up to 10 expansion batteries (sold separately) to extend your run time when powering your home, work or play.
  • Parallel Ready: A parallel kit (sold separately) enables this unit to connect with another Champion power station or a ParaLINK-capable traditional inverter to double your output power.
  • Champion Support: Includes a 3-year or 1000-cycle limited warranty with FREE lifetime technical support from dedicated experts.
Check Stock

40A MPPT Solar Charge Controller 12V 24V 36V 48V Auto, PV 150V Max Input Solar Panel Regulator 40amp for AGM Sealed Gel Flooded Lithium Battery

  • 12V/24V/36V/48V Auto identifying system volt. Auto control system to limit the charging power & current go over the rated value..
  • MPPT best working voltage range:DC18V-DC80V(12V).
  • Support for 4 type Battery charging: Lead-acid (Sealed, AGM, Gel, Flooded) and User ( Lithium Battery). Display the daily power generation curve and current curve..
  • Multiple protection against overcharge, over discharge, over load, short circuit, reverse polarity, over heat and battery under voltage..
  • The tracking rate of maximum power is ≥99% and the maximum conversion rate is >98%.
Check Stock

LINOVISION Industrial 8-Port Full Gigabit Solar POE Switch with DC12V/DC24V to DC48V Voltage Booster, IEEE802.3at with Total POE Budget 240W, POE Power Supply for Solar Power/RV Truck/VoIP Systems

  • DC12V ~ DC48V POE VOLTAGE BOOSTER - Supply standard IEEE802.3af/at POE power with DC12V/DC18V/DC24V/DC36V/DC48V input.
  • 8-PORT FULL GIGABIT POE SWITCH - Providing 8*10/100/1000Base-T Ethernet PoE ports and 2*1000Base-X SFP slots (Fiber module is not included). Each POE ports are compliant to IEEE802.3af/at standard. It supports one-key fast ring fiber network and broadcast storms protection (BSP).
  • INDUSTRIAL DESIGN FOR HARSH ENVIRONMENT - Fanless design and wide working temperature (-40℃ ~ 75℃ or -40 ℉ ~167 ℉).
  • POE WATCHDOG - Realtime monitoring POE load device's status and will automatically reboot POE port when the connected device is not active. It proivdes non-stop running of POE device, like security cameras, IP speakers and IP phones.
  • TOTAL 240W POE BUDGET - Up to 30W per POE port, and total 240W POE budget (DC48V input), or 120W (DC24V input), or 80W (DC12V input).
  • NON-STOP POE SUPPLY WITH DUAL POWER INPUT - Support 2 channel DC12V-48V redundant power inputs and auto failover, ensure high reliability networking system.
  • APPLICATION - For solar power system, vehicle, RV, VoIP IP phone system, robust fiber ring network.
Check Stock

Mini UPS Battery Backup 37Wh Uninterruptible Power Supply for Router, Modem, Security Camera with Input 5V DC Output 5V DC Max.3A Support Micro USB

  • Mini uninterruptible power supply for power outage, compatible with router, modem, security camera, DSL, and other 5V DC and Micro USB devices, and can still use WiFi in case of power outage..
  • Compact 5V DC backup battery, built-in 10000mAh 37Wh Li-polymer battery, offers a long backup time for the loading device..
  • Input: DC 5V or Micro USB 5V Max.3A, Output: DC 5V or Micro USB 5V Max.3A, support 0.5A, 1A, 1.5A, 2A, 2.5A and any current below 3A. No charger included, please use the original charger of the loading device..
  • Including 1×DC cable 5.5×2.5mm, 3×DC jacks 5.5×2.1mm, 4.0×1.7mm, 3.5×1.35mm and 1×Micro USB jacks..
  • Multiple smart protections: short circuit protection, voltage fluctuation protection, overcharge protection, over discharge protection, temperature protection, safe to use..
Check Stock

BTF-LIGHTING WS2812B WS2811 2.4G WiFi Music SP511E SPI Controller Google Home/Alexa Timer Mode with Dual Signal Output 900pixels/port for LED Module Pixel Strip Light APP/3Key Button/IR Remote Control

  • ...lexa vocie control dynamic chasing lighting effect. 8 kinds of musical lighting effect.Countless kinds of stactic lighting effect.Mark 4 kinds your favorite effect from dynamic . Mark 4 kinds of favorite effect form static . You also can switch freely between dynamic mode and static mode..
  • 5.5mmx2.1mm DC power jack .Support WS2812B ECO,UCS1903 ,SM16703,WS2811,WS2812B,6803 etc all the single data smart IC chip. Can not support SK6812RGBW 4 channels IC .3PIN Male Connector.
  • Drive 900 pixles/Port. This controller control 900 pixels/port max . The APP is Fairy Nest. This controller only support 2.4G WiFi network.Can't support 5.0G WiFi network. Only support 2.4GHz WiFi.If the WiFi is 2.4G/5.0G, please set the router to be divided into two WiFi, one is 5.0GHz and the other is 2.4GHz.
  • DC5V LED strip,Must use 5V power supply.For example LED strip is DC5V WS2812B , you must use DC5V power supply . The voltage depends on LED strips. Don't use DC12V power supply for DC5V WS2812B pixel strip..
  • Color calibration. When the app color is inconsistent with the color of the LED strip, where green is blue and blue is green You can use the APP to calibrate the colors to make them consistent..
  • Insufficient power supply will cause the controller to lose control, the colo....
Check Stock

6 Axis 125KHz NVCM USB Mach3 Stepper Motor Motion Control Card Breakout Board USB interface CNC Controller Board 12-32VDC for Servo Motor

  • ♞【Support software】This NVCM card support Mach3 software, through USB port to communicate with computer..
  • ♞【DC power supply input】main device is 12V-32V DC power supply input,current should higher than 1A.
  • ♞【Max 6 Axis Control】Can support 6 axis stepper systems maxisim,125KHz pulse output for every axis.
  • ♞【PWM output】1 port 0-10V spindle speed analog output interface(can change to PWM output).
  • ♞【Multifunction】 Power supply interface, USB connection interface, Stepper/Servo control output interface, spindle control output interface,....
Check Stock