Top Ddrpc12sdram 1mhz - BuyWiseBest.com

2pcs USB Logic Analyzer Device with USB Cable 24MHz 8CH 24MHz 8 Channel UART IIC SPI Debug for Arduino ARM FPGA M100 SCM

✹✹The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions..
✹✹Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz.
✹✹Input voltage range: -0.5V to 5.25V.
✹✹ART, SPI, IIC and other communication debugging, let you get twice the result with half the effort. 24M sampling rate, can automatically analyze UART, IIC, SPI and many other standard protocols..
✹✹his item is an inexpensive logic analyzer designed to be compatible with Saleae Logic Analyzer software, but this item is not an official Saleae product. This item is also supported by the free software by Sigrok called PulseView..

★The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions.
★Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz..
★Input Impedance: 1Mohm || 10pF (typical, approximate).
★UART, SPI, IIC and other communication debugging, let you get twice the result with half the effort. 24M sampling rate, can automatically analyze UART, IIC, SPI and many other standard protocols..

Good precision: the XR2206 function signal generator is precise, with a transparent case box shell for good assemble.
Parameters: Voltage Supply: 9-12V DC Input.
Sine wave parameters:Amplitude: 0-3V at 9V DC input.
Square wave parameters: Amplitude: 8V (no load) at 9V DC Input.
Triangle wave: Amplitude: 0-3V at 9V DC input.
Linearity: less than 1% (up to 100 KHz) 10 mA.

This item is an inexpensive logic analyzer designed to be compatible with Saleae Logic Analyzer software, but this item is not an official Saleae product. This item is also supported by the free software by Sigrok called PulseView..
Sampling rate up to: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz..
The logic for each channel sampling rate of 24M/s. General applications around 10M, enough to cope with a variety ofoccasions..
A total of 8 digital channels, the voltage range is 0V and 5.5V, of which 1.5V is the voltage threshold, below 1.5V is considered low, above 1.5V is considered high..
UART, SPI, IIC and other communication debugging, let you get twice the result with half the effort. 24M sampling rate, can automatically analyze UART, IIC, SPI and many other standard protocols..

3-channel AM transmitter 1MHZ 3MHZ 5MHZ Kit.
Products include: 1Set(with ANT and cable)((For the new version, the color of PCB and wire will be shipped randomly, which may be different from the color of the picture, please understand).

【Product introduction】: This item is an inexpensive logic analyzer designed to be compatible with Saleae Logic Analyzer software..
【Applicable to various occasions】: The logic sampling rate of each of the 8 channels is 24M/s, generally about 10M, which is sufficient for various occasions.
【Channel value】: A total of 8 digital channels, the voltage range is 0V and 5.5V, of which 1.5V is the voltage threshold, below 1.5V is considered low, above 1.5V is considered high..
【Sampling rate up to】: 24 MHz , can be 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz..
【Automatic analysis】: UART, SPI, IIC and other communication debugging, let you get twice the result with half the effort. 24M sampling rate, can automatically analyze UART, IIC, SPI and many other standard protocols..

Your bundle includes a HackRF One, an ANT500 antenna, 4 SMA antenna adapters and a USB cable for powering the HackRF.
HackRF One is capable of half-duplex transmit and receive in the range of 1MHz to 6GHz.
HackRF One is compatible with a wide range of SDR software applications.
The included adapters will allow you to connect a wide range of antennas to your HackRF One, including F-connector, N-connector, BNC and PAL antennas.
Installation support and assistance available directly from NooElec.

Evga Geforce Gt 730 Graphic Card - 700 Mhz Core - 2 Gb Ddr3 Sdram - Pci Express 2.0 X16 - Single Slot Space Required - 1400 Mhz Memory Clock - 128 Bit Bus Width - 4096 X 2160 - Directx 12, Opengl 4.4, Opencl - Hdmi - Dvi - 1 X Hdmi Outputs - 2 X Dvi Outputs.

【Upgraded Version of The Bug Detectors Anti-spy Detector】BTFDREEM M8000 detector using advanced chip technology in Germany, professional radio wave detection device, detection frequency range of 1MHz-12GHz.
less than 0.03mw detection make it for high sensitivity, wireless camera detection range up to 36 ㎡.
built-in 3.7v & 1500mAH battery, aluminum alloy body with strong anti-interference ability, equipped with searchlight magnetic induction Flexible antenna..
【4 Detection Modes】:This Anti Spy Detector has 4 detection modes: RF signal detection, magnetic field detector, automatic detection of ultra-small hidden camera detector and infrared detection.Three danger levels are displayed above and when a hidden device is detected the signal light will point to a higher danger level..
【Long Standby and Ease of Use】Built-in 1500 mAh battery, support continuous work for about 20-45 hours, standby time of about 45 days, do not always worry about the power problem.
mini-portable design, you can put the wireless audio bug in a backpack or pocket, take it anywhere you want to go..
【Security Protection】 This RF detector can be used in homes, offices, hotels, motels, cars, bathrooms, locker rooms, business negotiations, confidential meetings, go....

This is a PE4302 numerical control RF attenuator module.
The parallel immediate mode is simple and easy to use.
Bandwidth is wide and can be 1MHz to 4GHz.
Program control gain attenuation range is from 0 to 31.5DB.
The module supports parallel port and serial port mode as well as power on state selection function.