Top De foaming Agent For Mold Release

Polytek Pol-Ease 2500 Release Agent (12oz. Can)

  • Can be washed off models and castings if they need to be painted.
  • For Mold Making: Apply to non-porous or sealed models when making silicone rubber molds (not recommended for use with liquid polyurethane rubbers)..
  • Apply to silicone rubber molds when casting liquid silicone rubber.
  • To extend mold life, apply to silicone molds when casting materials such as polyurethane plastics, rubbers or epoxies (release agent is not needed for this process, but can extend mold life).
  • Apply to polyurethane molds before casting polyurethane liquid plastics.
Check Stock

4 Size Silicone Bangle Mold Clear Round Bracelet Jewelry Casting Resin Mould Normal

  • It can be used as Resin, Cabochon, Polymer Clay,Gum Paste, Pmc, Wax, Candle, Soap Mold.
  • Finish product inner diameter: 4 sizes: 2.12", 2.28",2.36" 2.44".
  • Cleaning: Wipe with alcohol or direct water to wash and clean..
  • Use: With silicone mold release agent is more durable..
  • Package included: 4 size silicone bracelet mold.
Check Stock

PVA - PARTALL Film #10 Polyvinyl Alcohol (PVA) Pint

  • Partall Film #10 is a water/alcohol-based polyvinyl alcohol (PVA) release agent that forms a barrier between parts and mold surfaces that are still curing (green or recently reconditioned molds can be reactive)..
  • Partall Film #10, the original green parting film, is resistant to solvents and styrene yet is water soluble..
  • Protects against hang ups with polyester and vinyl-ester resins.
  • also used with epoxy and urethane resins.
  • PVA is most commonly applied over release wax although some users find success by adding wax over the PVA film (giving a second part cycle before replacing PVA.).
  • Partall Film #10 can also be used as a surface cure agent during gel coat repairs (locks out moisture in the air that inhibits resin cure)..
Check Stock

Polytek Pol-Ease 2500 Release Agent (Case of 12 cans)

  • Can be washed off models and castings if they need to be painted.
  • For Mold Making: Apply to non-porous or sealed models when making silicone rubber molds (not recommended for use with liquid polyurethane rubbers)..
  • Apply to silicone rubber molds when casting liquid silicone rubber.
  • To extend mold life, apply to silicone molds when casting materials such as polyurethane plastics, rubbers or epoxies (release agent is not needed for this process, but can extend mold life).
  • Apply to polyurethane molds before casting polyurethane liquid plastics.
Check Stock

Polytek Pol Ease 2300 Release Agent (1 Can)

  • A multi-purpose silicone release agent made of a blend of silicone oils and resins in a convenient aerosol spray can.
  • Pol-Ease 2300 is an effective release for most Polytek products, but should not be used before pouring or brushing liquid silicone mold rubber.
Check Stock

Polytek Pol Ease 2300 Release Agent (Case of 12 cans)

  • A multi-purpose silicone release agent made of a blend of silicone oils and resins in a convenient aerosol spray can.
  • Pol-Ease 2300 is an effective release for most Polytek products, but should not be used before pouring or brushing liquid silicone mold rubber.
Check Stock

Large Square Resin Molds-Large Cube Silicone Casting Molds for DIY Art Epoxy Resin,Transparent Deep Square Silicone Molds for Resin Casting,4 Inch and 3Inch,2 Pack

  • ...FECT GIFT: Large square resin mold,large cube silicone molds for resin are perfect to make cube shapes decorative resin crafts such as resin souvenir,flowers preservation,candle,birthday gift,ornaments,large cube resin ornament,xmas ornaments etc..
  • EASY TO DE-MOLD: Smooth and shiny interior makes it easy to de-mold. release spray ro mild soapy water may help demold easily.Large cube resin molds silicone with 2 size,large epoxy resin molds can help to preserve flowers in resin including wedding flowers bouquet,Valentine's Day flowers,graduation flowers,funeral flowers,enshrine the important moment forever..
  • Tips: 1)Resin molds are suit for casting resin only, not suit for coating resin, Please don't use torch or heat gun when resin is in the mold. It will damage the mold.2)For large cube silicone molds,layer pouring recommend.sakolla deep cube resin mold will help to present 3d style cube crafts..
  • How to Make Easy Demold:Pour water into cube resin molds large and make resin cube craft release from the molds resin large,then it can be easy demold..
Check Stock

Jovi Air-Dry Modeling Clay; 2.2 lb. Grey, Non-staining, Perfect for Arts and Crafts Projects

  • Create Works of Art: Shape and mold this high-density clay into any design your mind can envision! It holds any crevice, notch, knot or shape you mold into it! Fills silicon molds easily!.
  • Dries with Precision and Reliability: Let your work air dry for 48 hours then marvel at your artistic endeavors! It will display all of the fine details you worked so hard to create! Note: may need additional drying time for thicker projects..
  • Design for Cosplaying Characters, Costumes and Crafts: Get creative! If you can mold it, you can create it with our fantastic moldable foam clay!.
  • Adheres Great: Use an adhesive agent (not included) to easily attach this foam to itself or other surface types, such as other foams, wood, tile, fabric, ceramic and so much more! A little contact cement or super glue is all you need!.
  • Professional Strength: Even if you’re working to create costumes or props for plays or movie sets, you can depend on this fantastic foam clay to outlast any other types of moldable foam!.
Check Stock

Coffee Cup Quicksand Silicone Mold,Cup Shaker Resin Mold,Coffee Cup Coaster Mold,Coffee Lemon Slices Mold,Coaster Base Mold,Resin Art Molds

  • You Will Get- a set classic Coffee cup molds, 1PC coaster mold,1PC coffee lemon slices mold..
  • With Holder Mold - A coaster holder mold is also included for organizing or displaying. This is the only coffee cup mold set that comes with a....
  • Perfect Gifts - Our silicone coaster molds would be nice gift for epoxy resin fans or you can use it to craft unique coaster kits and give them as....
  • Material - These coster molds are made of high-quality silicone, BPA-free, flexible, durable and reusable. Non-stick, easy to demold without damaging.
  • Easy to Operate - Soft and smooth interior makes it easy to de-mold after fully cured. Use a release spray or soapy water to release the mold, which....
Check Stock

Pack of 2 Cat Paws Shape Epoxy Mold Cute Catie Footprint Resin Casting Silicone Mold, 3.8 x 3.5cm

  • Material: Silicone. Soft, flexible, durable and reusable, easy to get the mold out..
  • Pack of 2 cat paws silicone mold. The finished products are very shiny and clear..
  • Fun DIY craft mold, you can add some resin pigment or filters to make the cat paw more attractive..
  • After your project is fully cured, it will be easy to pop out of the resin mold. You can use soapy water as a mold release agent. Keep stored in a dry dust free area. Stay away from strong acids..
Check Stock

Epoxy Mold – 10 x 18 in≈ -River Table Reusable Molds - 3" Tall Solid HDPE 3/8" Thick Casting Reusable Mold for River Table, Charcuterie Board, Cutting Board, Size May Vary IE: 17 3/4 x 9 3/4 in

  • ... pour project such as charcuterie board, serving tray, river table, etc..
  • EASY TO DEMOLD: Our epoxy molds have a smooth inner surface and malleable bottom to ensure a quick and effortless de-mold. The side walls have a 3-degree exterior inclination to enable a suction-free release. You only need to apply outward pressure on the sides and a downward force on the bottom to de-mold..
  • EASY TO USE NO SEAL EPOXY MOLD: We've extended the side lips to facilitate securing the wood slab to the mold. We've also added measuring dots to ensure the clamping, and your project is asymmetric. The resin mold is built sturdy to ensure the integrity of any project, yet it is still malleable to ensure easy demolding..
  • HEAVY-DUTY HDPE MOLD: We've designed and built our no-seal epoxy mold to guarantee it will last our customers for years. Its light, smooth & easy to de-mold attributes render any project into a fun & easy epoxy project, while its tough-built will guarantee its longevity..
  • BEST MOLD FOR EPOXY RESIN: Not only do we have one of the best molds for epoxy resin, but we also have the bes....
Check Stock

Grandmama's Goodies AO129 Pyramid Chocolate Candy Mold with Exclusive Molding Instructions

  • High-quality silicone, safety, high Flexible, full transparency, Super easy to de-mold.
  • Fill the entire mold about 1200 grams of resin, You Can Make Any Size Below 15.7cm artworks.
  • Be careful to place the Silicone mold insert into the plastic shell accurately, Make sure all sides flush. Pour alcohol into the outer shell make it easy.It is recommended to use "mold release".
  • The mold is used to create the fantastic pyramid-shaped artwork, Mold is reusable.
Check Stock